My Net N900 Central Router User Manual - Western Digital

в„ў
My Net
N900 Central
HD Dual-Band Storage Router
User Manual
WDВ® Service and Support
Should you encounter a problem, please give us an opportunity to address it before returning this
product. Most technical support questions can be answered through our knowledge base or e-mail
support service at http://support.wdc.com. If the answer is not available or, if you prefer, please
contact WD at the best telephone number shown below.
Your product includes 30 days of free telephone support during the warranty period. This 30-day
period starts on the date of your first telephone contact with WD technical support. E-mail support
is free for the entire warranty period and our extensive knowledge base is available 24/7. To help us
keep you informed of new features and services, remember to register your product online at
http://register.wdc.com.
Accessing Online Support
Visit our product support website at http://support.wdc.com and choose from these topics:
Downloads - Download drivers, software, and updates for your WD product.
Registration - Register your WD product to get the latest updates and special offers.
Warranty & RMA Services - Get Warranty, Product Replacement (RMA), RMA Status, and
Data Recovery Information.
Knowledge Base - Search by keyword, phrase, or answer ID.
Installation - Get online installation help for your WD product or software.
WD Community вЂ“ Share your thoughts and connect with other users.
Contacting WD Technical Support
When contacting WD for support, have your WD product serial number, system
hardware, and system software versions available.
United States/North America
English/Spanish
855.842.5370
Asia Pacific
00 +80085584253
0011 +80085584253
Australia
001 +80085584253
Hong Kong/Singapore/Thailand
001/0033/0061 +80085584253
Japan
Europe
00 +80085584253
Finland
990/999 +80085584253
Middle East
0031.880062100
Africa
0031.880062100
South Africa
09 +80085584253
Go to http://support.wdc.com/contact for a list of additional phone support numbers by region.
MY NET N900 CENTRAL
USER MANUAL
ii
Table of Contents
WDВ® Service and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
1
Important User Information . . . . . . . . . . . . . . . . . . . . 1
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Recording Your WD Product Information . . . . . . . . . . . . . . . . . . . . 2
Registering Your WD Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Installing the Router on the Network . . . . . . . . . . . . . . . . . . . . . . . . 9
Using the Setup CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using a Browser for Setup (Windows or Mac) . . . . . . . . . . . . . . . . 13
Installing WD Software from the CD (Optional) . . . . . . . . . . . . . . . . 18
4
Basic Settings and Tasks . . . . . . . . . . . . . . . . . . . . . 21
Opening My Dashboard After Setup. . . . . . . . . . . . . . . . . . . . . . . . 21
Understanding My Dashboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Connecting to the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Configuring Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Setting Up Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Adding a Wi-Fi Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Setting up Remote Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
5
Advanced Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Typical Advanced Settings Screen . . . . . . . . . . . . . . . . . . . . . . . . . 37
Advanced WAN (Internet) Category . . . . . . . . . . . . . . . . . . . . . . . . 38
Advanced LAN Category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Security Settings Category. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Remote Access Category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Additional Features Category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Admin Category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
TABLE OF CONTENTS вЂ“ iii
6
Performing Advanced Tasks . . . . . . . . . . . . . . . . . . 58
Enabling Guest Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Setting Up Parental Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Changing the Administrator Password . . . . . . . . . . . . . . . . . . . . . 64
Accessing Files on the Router or an Attached USB Drive . . . . . . . . 65
Updating the RouterвЂ™s Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Restoring the Router to Factory Defaults . . . . . . . . . . . . . . . . . . . . 70
Rebooting the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Using the Router as an Access Point . . . . . . . . . . . . . . . . . . . . . . 71
Configuring UPnP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Enabling Port Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Accessing My Net View (Windows) . . . . . . . . . . . . . . . . . . . . . . . . 76
7
Installing and Using WD Print Share . . . . . . . . . . . . 77
Installing WD Print Share (Windows). . . . . . . . . . . . . . . . . . . . . . . . 77
Installing WD Print Share (Mac) . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Using the WD Print Share Control Center . . . . . . . . . . . . . . . . . . . 79
8
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
9
Regulatory and Warranty Information. . . . . . . . . . . 82
Regulatory Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Warranty Information (All Regions Except Australia/New Zealand) . 86
Warranty Information (Australia/New Zealand only) . . . . . . . . . . . . . 87
GNU General Public License (вЂњGPLвЂќ) . . . . . . . . . . . . . . . . . . . . . . . 88
Appendix: Technical Specifications . . . . . . . . . . . . . . . . 89
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
TABLE OF CONTENTS вЂ“ iv
IMPORTANT USER INFORMATION
1
Important User Information
Important Safety Instructions
This device is designed and manufactured to assure personal safety. Improper use can
result in electric shock or fire hazard. The safeguards incorporated into this unit will protect
you if you observe the following instructions for installation, use, and servicing.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturerвЂ™s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods
of time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
Carefully read and follow the Quick Install Guide and User Manual.
Do not operate this device outside the temperature range of 5В°CвЂ“35В°C
(41В°FвЂ“95В°F).
Do not drop or shake the device.
Do not move the device when it is powered on.
Power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon them or against them.
Do not overload wall outlets.
For additional safety information, refer to www.wdc.com.
MY NET N900 CENTRAL
USER MANUAL
1
IMPORTANT USER INFORMATION
Recording Your WD Product Information
In the following table, write the serial and model numbers of your new WD product. You can
find this information on the label on the bottom of the device. You should also note the date
of purchase. This information may be required when requesting technical support.
Serial Number:
Model Number:
Purchase Date:
System and Software Notes:
Registering Your WD Product
Your WD product includes 30 days of free technical support during the applicable warranty
period for your product. The 30-day period commences on the date of your first telephone
contact with WD technical support. Register your WD product online at
http://register.wdc.com.
MY NET N900 CENTRAL
USER MANUAL
2
PRODUCT OVERVIEW
2
Product Overview
Thank you for purchasing the My Net N900 Central. This user manual provides
step-by-step instructions for installing and using your new router. For the latest WD product
information and news, visit our website at www.wdc.com.
This chapter contains the following topics:
Features
Package Contents
Components
Getting Started
Features
The outstanding features of the My Netв„ў N900 Central router are listed and described
below.
Features
Wireless speed1
Wired speed
USB ports
Ethernet ports
Internal storage
450 Mbps +
450 Mbps
10/100/1000 Gigabit Ethernet
(1) USB 2.0
(4) RJ-45
1 TB or 2 TB built-in storage
WMM QoS
3
FasTrackв„ў Plus
3
Note: For detailed technical specifications, see Appendix A.
Easy Setup (for WindowsВ® Computers) вЂ“ Installation software that connects your router
and sets up Wi-Fi security, creating a secure wireless home network.
Simultaneous dual band speed1 вЂ“ Enables you to enjoy smooth, uninterrupted video
streaming and online gaming.
Wired speed вЂ“ Connect up to four Ethernet-enabled devices for fast wired speed within
your network.
Exclusive FasTrack Plus technology вЂ“ Instantly recognizes movies, videos, games, and
voice-n-video chat sessions on your network and prioritizes them so you get a smooth,
streaming experience. It automatically allocates more bandwidth for your entertainment,
while providing efficient bandwidth to all the other things happening on the network.
FasTrack Plus also preserves the quality of your entertainment streaming, giving you a
brilliant HD viewing experience.
1. Maximum wireless performance rate derived from IEEE standard 802.11 specifications. Actual data throughput
and wireless coverage may vary based on wireless network capacity, data throughput rate, range and coverage.
Performance depends on factors including distance from the access point, volume of network traffic, building
materials and construction, operating system used, configuration of wireless products used, interference and
other adverse conditions.
MY NET N900 CENTRAL
USER MANUAL
3
PRODUCT OVERVIEW
USB port вЂ“ Gives you the flexibility to add storage devices and share files with other
computers or mobile devices. Enables you to connect a printer to a USB port and print from
any computer within your network.
Internal storage вЂ“ The My Net N900 Central router models provide 1 TB or 2 TB of internal
storage.
DLNA/UPnP media server вЂ“ The internal drive and an external hard drive connected to a
USB port on the My Net N900 Central router can be used to stream photos, video, and
music to your media client.
Internet Security and Parental Controls вЂ“ Use this feature to block web sites or content
based on your preferences.
Guest access вЂ“ Set up guest access to allow others to use your Internet connection
without joining your personal network. While guests will have access to the Internet, they will
not have access to your personal files or local resources such as a printer.
WPS (Wi-Fi Protected Setupв„ў) security вЂ“ Use the one-touch WPS button on your router
to establish a secure connection between the My Net N900 Central and other WPS-enabled
Wi-Fi devices such as tablets and notebook computers.
Keep your network up and running вЂ“ The included network diagnostics tool monitors
your network for you. It shows how many devices are on your network, continually analyzes
common network connectivity issues and helps correct them when they occur so you are
back up and running quickly.
Push button setup (WPS) вЂ“ Easily connect new devices to your wireless network with the
push of a button.
Advanced settings вЂ“ Users who want to customize and have control over their device can
use the Advanced Settings module on the My Dashboard user interface.
Remote access вЂ“ Your My Net N900 Central router keeps your files safe at home and
always with you. You can access your files, music and photos with your mobile devices
using WD 2goв„ў and WD Photosв„ў mobile apps and WD 2go web access:.
WD 2go mobile app lets you access your files, music, and photos stored on your My
Net N900 Central router using your tablet or smartphone.
WD Photos lets you take a photo or video clip with your tablet or smartphone and
upload it directly to your My Net N900 Central routerвЂ™s internal storage.
Open and view presentations and documents, stream media, and show off photos
stored on your My Net N900 Central router.
WD 2go for the web gives you access to all the files in your My Net N900 Central
routerвЂ™s internal storage no matter where you are as long as you have access to the
Internet from a computer.
Additional software вЂ“ The product CD provides additional software:
WD Quick View runs in the background in your computer and notifies you of
important warnings or events on the network. For example, it notifies you of new
firmware availability, shows network attached storage status, and opens the router's
My Dashboard user interface.
WD Print Share enables users to share a printer connected to the USB port on the
My Net N900 Central router.
MY NET N900 CENTRAL
USER MANUAL
4
PRODUCT OVERVIEW
My Net View (Windows only) diagnoses and detects any issue within the network
and recommends ways to address the issue. WD Customer Service also uses this
software to get necessary information to support customers with network issues.
WD SmartWare configures data backup of the Windows computers on your
network to the router's internal hard drive.
Note: My Net N900 Central is compatible with AppleВ® Time Machineв„ў to back up
MacВ® computers.
Package Contents
In addition to your My Net N900 Central, the package contains:
Network (Ethernet) cable
AC Power adapter
Setup CD containing setup software (Windows only), additional software, and
product documentation
Quick Install Guide on the CD cover
Quick Install Guide
My Net N900 Central
AC power adapter
Ethernet cable
Setup CD
Accessories
For U.S. residents, visit www.shopwd.com to view additional accessories available for your
My Net N900 Central router. For users outside the U.S., visit http://support.wdc.com.
MY NET N900 CENTRAL
USER MANUAL
5
PRODUCT OVERVIEW
AC Power Adapters
The AC power adapter varies, depending on your location. Some locations do not require a
power plug clip. Units sold in those locations have a fixed power plug. Refer to the
illustrations below.
US/JA/TW EU/KO
US/JA/TW EU/KO
Installing
Installing
Removing
Removing
Components
Front Panel
Power LED
Internet LED
Internal Storage
Wi-Fi Protected Setup
(WPS) button
Wireless LED Wi-Fi Protected Setup LED
MY NET N900 CENTRAL
USER MANUAL
6
PRODUCT OVERVIEW
Front LED Indicators
LED
Description
Power
Steady when the router is powered on and operational; flashes slowly
during firmware upgrades and system self-tests.
Wireless
Lit when wireless connection is active.
Internet
Lit when Internet connection is active.
Wi-Fi Protected
Setup (WPS)
When connecting the router and a wireless device (e.g., a printer) that
you want to add to the network, the LED indicates the status of
WPS:
When WPS is connecting a network device, the light blinks slowly.
If an error occurs during setup, the light blinks quickly.
After setup, light is solid when WPS is active.
Internal Storage
Lit when active (reading or writing).
Front Button
Button
Description
WPS (Wi-Fi
Protected
Setup) button
Enables you to configure Wi-Fi security on WPS-enabled devices.
Back Panel
Link LED (Green)
Power button
Power port
Activity LED (Yellow)
Ethernet ports
Internet port
Kensington security slot
USB 2.0 port
Port LED Indicators
Component
LED
Description
Ethernet ports
Link LED (Green)
Steady on when a cable connects the port to
another Ethernet port.
Activity LED (Yellow)
Blinks to indicate network activity of that
Ethernet port.
Link LED (Green)
On when a cable connects the port to the
modem.
Activity LED (Yellow)
Blinks to indicate network activity on that port.
Internet port
MY NET N900 CENTRAL
USER MANUAL
7
PRODUCT OVERVIEW
Bottom (not shown)
Component
Description
Reset button
To reset your My Net N900 Central router to factory defaults, press and hold
the Reset button until the power LED begins blinking (about 10 seconds).
1
MY NET N900 CENTRAL
USER MANUAL
8
GETTING STARTED
3
Getting Started
This chapter contains the following topics:
Installing the Router on the Network
Using the Setup CD
Using a Browser for Setup (Windows or Mac)
Installing WD Software from the CD (Optional)
Installing the Router on the Network
Two methods install the My Net N900 Central router on your network:
Setup CD вЂ“ The Easy Setup utility for Windows discovers and installs the router on
the network. Use this utility to configure the Internet connection and wireless
network, and to install additional WD software.
Browser вЂ“ Mac users must use a web browser to set up the router. Windows users
may also use a web browser to set up the router.
Using the Setup CD
Starting Easy Setup (Windows)
Windows XP
1. Insert the Setup CD into your computerвЂ™s CD/DVD drive.
If AutoRun (AutoPlay) is enabled, the Choose your setup option screen displays.
If AutoRun (AutoPlay) is disabled, click Start > My Computer and locate the
My Net N900 Central router CD drive under Devices with Removable Storage.
Double-click the CD, and then double-click EasySetup to display the Choose your
setup option screen.
2. Continue to вЂњSetting up a New RouterвЂќ on page 10.
Windows Vista/Windows 7
1. Insert the Setup CD into your computerвЂ™s CD/DVD drive.
2. If a dialog box displays, click Run EasySetup.exe:
3. If a dialog box does not display, click Start or
> Computer and locate the
My Net N900 Central router CD drive under Devices with Removable Storage.
MY NET N900 CENTRAL
USER MANUAL
9
GETTING STARTED
4. Double-click the CD, and then double-click EasySetup.exe to display the Choose
your setup option screen.
5. Continue to вЂњSetting up a New RouterвЂќ below.
Setting up a New Router
1. On the Choose your setup option screen, click Set up a new router. A screen
showing a connected router appears:
MY NET N900 CENTRAL
USER MANUAL
10
GETTING STARTED
2. Make sure that your router is connected properly and click Confirm:
3. The utility checks your connection to the router and the Internet. When both
connections are confirmed, click Next. Continue to step 5.
4. If the connection to the network cannot be established:
a. Click Next and follow the wizardвЂ™s instructions for troubleshooting your Internet
connections. If your second attempt fails, the following screen displays:
b. You have two options:
From the Internet Connection Type drop-down list, select the type of connection
you want and enter the required information. The default connection type is
PPPoE. Click Next.
Note: See вЂњAdvanced WAN (Internet) CategoryвЂќ on page 38 for more
information about connection types.
To proceed without setting up your Internet connection, click Skip.
MY NET N900 CENTRAL
USER MANUAL
11
GETTING STARTED
The Secure your wireless network screen displays.
5. Accept the current values or enter a new network name and password.
6. Click Print to make a hard copy of the Wireless network settings and/or click Next to
save these routerвЂ™s wireless settings. The Router Setup Complete screen displays.
7. On the Router Setup Complete screen, do one of the following:
Note: You can install software from the Setup CD and update the firmware from
the My Dashboard user interface at any time.
a. Check online for the latest firmware for your router or go to the software installation
menu and select the appropriate check box(es).
Note: For more information on these processes, see вЂњUpdating the RouterвЂ™s
FirmwareвЂќ on page 69 and вЂњInstalling WD Software from the CD
(Optional)вЂќ on page 18.
b. To use or configure the router without selecting the other options, clear the check
boxes and click Next.
MY NET N900 CENTRAL
USER MANUAL
12
GETTING STARTED
8. Register your router to receive software notifications and customer support:
a. Enter your name and email address, and click Register:
b. (Optional) Select the Email me about product information, WD News, etc.
check box.
c. To configure additional router settings, select the Explore my router settings
when I click Finish check box and continue with вЂњBasic Settings and TasksвЂќ on
page 21
Using a Browser for Setup (Windows or Mac)
To connect a Mac computer to a My Net N900 Central router you must use a browser.
Note: Windows users can set up the router using a browser instead of Easy
Setup.
The initial physical connection may be wired, as described in вЂњConnecting the Router
PhysicallyвЂќ below, or wireless, as described in вЂњConnecting to the Router WirelesslyвЂќ on
page 14.
Connecting the Router Physically
While the installation wizards for the router lead you through the steps for physically
connecting the router, this section is for users who want more specific information and for
those who simply want to connect the router and start using it.
MY NET N900 CENTRAL
USER MANUAL
13
GETTING STARTED
1
2
3
1. Connect the power cable to the routerвЂ™s DC connector and into an AC power outlet.
Press the On/Off button on the back of the router once to turn it on. The four LEDs on
the front panel of the router light up one by one as it boots up.
2. Connect the included yellow Internet (Ethernet) cable to the routerвЂ™s Internet port and the
modem.
Note: One Ethernet (network) cable is included in the product package. You can
purchase additional cables from the WD Store or another source.
3. Using Ethernet cables, connect network devices or computers to the routerвЂ™s unused
Ethernet ports.
4. Continue to вЂњConfiguring a New RouterвЂќ on page 15.
Connecting to the Router Wirelessly
If you are using a desktop computer with a wireless card or a laptop computer with wireless
capability, you can connect wirelessly to the router immediately. The same is true of mobile
wireless devices with Wi-Fi enabled.
1. Make sure your computer's Wi-Fi is turned on.
2. From the list of wireless networks on the computerвЂ™s or deviceвЂ™s screen, select the
WesternDigital network and connect. By default there is no password. Continue to
вЂњConfiguring a New RouterвЂќ on page 15.
MY NET N900 CENTRAL
USER MANUAL
14
GETTING STARTED
Configuring a New Router
1. Open a browser. (See requirements in вЂњAppendix: Technical SpecificationsвЂќ on page 85.)
2. In the address field, type http://wdrouter, http://wdrouter.local (for Mac computers),
or http://192.168.1.1.
The Welcome screen displays:
3. Click Continue to display the first Connect to Internet screen.
4. Make sure that your router is connected properly and click Confirm.
5. If both connections are confirmed, click Next. Continue to step 7.
MY NET N900 CENTRAL
USER MANUAL
15
GETTING STARTED
6. If the connections are not confirmed:
a. Click Next and follow the wizardвЂ™s instructions for troubleshooting your Internet
connection. If your second attempt fails, the following screen displays:
b. You have two options:
To continue setting up an Internet connection, from the Internet Connection
Type drop-down list, select the type of connection you want to make and enter
the required information. The default connection type is PPPoE. Click Next and
continue to step 7.
Note: See вЂњAdvanced WAN (Internet) CategoryвЂќ on page 38 for more
information about connection types.
To proceed without setting up your Internet connection, click Skip. The My
Dashboard home page displays.
Note: To configure your router, continue with вЂњBasic Settings and TasksвЂќ on page
21.
7. When the Set up Wireless screen displays, you can change the Network Name and
Password for more protection. (See вЂњConfiguring Wireless SettingsвЂќ on page 26 for
more information.)
MY NET N900 CENTRAL
USER MANUAL
16
GETTING STARTED
8. Click Save. The Wireless Setting Changed screen displays.
3
Note: If you made changes, you will have to connect your computer or wireless
device to the new network.
9. Click OK. The My Dashboard home screen displays.
Note: To configure your router, continue with вЂњBasic Settings and TasksвЂќ on page
21.
MY NET N900 CENTRAL
USER MANUAL
17
GETTING STARTED
Installing WD Software from the CD (Optional)
Easy Setup (Windows)
Use Easy Setup to install additional WD software on a Windows computer at any time.
1. Start Easy Setup as described in вЂњStarting Easy Setup (Windows)вЂќ on page 9.
2. On the Choose your setup option screen, click Skip and go to software installation.
A list of available software applications displays:
3. Click the check boxes for the software you want to install and click Next..
4. Complete the wizards to install the software, and then click Finish.
For information about...
See...
WD Quick View
вЂњUsing WD Quick View (Windows or Mac)вЂќ on page 65
WD Print Share
вЂњInstalling and Using WD Print ShareвЂќ on page 77
My Net View
вЂњAccessing My Net View (Windows)вЂќ on page 76
WD SmartWare
WD SmartWare online Help
MY NET N900 CENTRAL
USER MANUAL
18
GETTING STARTED
My Netв„ў Setup (Mac)
Use My Net Setup on the Setup CD to install WD Print Share and WD Quick View on a Mac
computer.
1. Insert the Setup CD into the CD drive of your Mac computer to display the Welcome to
the My Net Setup Installer screen:
Note: As you follow the steps in the installation wizard, they appear in bold
letters in the list on the left:
2. Click Continue to display the Standard Install on вЂњMacintosh HDвЂќ screen. You have the
following options:
To change the location of the applications, click Change Install Location.
To customize the installation, click Customize and select the applications you want
to install.
MY NET N900 CENTRAL
USER MANUAL
19
GETTING STARTED
To perform a standard installation of WD Quick View and WD Print Share, click
Install.
Note: For information about WD Quick View, see вЂњUsing WD Quick View
(Windows or Mac)вЂќ on page 65. For information about WD Print Share, see
вЂњInstalling and Using WD Print ShareвЂќ on page 77.
MY NET N900 CENTRAL
USER MANUAL
20
BASIC SETTINGS AND TASKS
4
Basic Settings and Tasks
This chapter contains the following topics:
Opening My Dashboard After Setup
Understanding My Dashboard
Opening My Dashboard After Setup
Connecting to the Internet
Configuring Wireless Settings
Setting Up Storage
Adding a Wi-Fi Device
Setting up Remote Access
Opening My Dashboard After Setup
To open the My Net N900 Central router dashboard after initial configuration:
1. Enter http://wdrouter or http://192.168.1.1 in the address field of your browser. The
Welcome screen displays:
2. Enter the routerвЂ™s username (default value is admin) and password (default value is
lowercase password) and click Submit. The My Dashboard home screen displays:
MY NET N900 CENTRAL
USER MANUAL
21
BASIC SETTINGS AND TASKS
Understanding My Dashboard
Basic Dashboard Icons
The icons at the top of the screen open modules and wizards for performing important
tasks. The red Alert icon at the upper right of the screen displays notices concerning the
router.
Icon
Name
Actions
See ...
My Dashboard
Review and change current settings.
вЂњBasic Settings and
TasksвЂќ on page 21
Connect to
Internet
Connect the router to the Internet and
follow the wizard through the process
of setting up the Internet connection.
вЂњConnecting to the
InternetвЂќ on page 24
Set up Wireless
Configure wireless settings such as
network name and security.
вЂњConfiguring Wireless
SettingsвЂќ on page 26
Set up Storage
Follow the wizard guiding you through
setting up internal storage or a storage
device connected to the routerвЂ™s USB
port.
вЂњSetting Up StorageвЂќ on
page 27
Add a Wi-Fi
Device
Add a wireless device and configure its
security settings.
вЂњAdding a Wi-Fi DeviceвЂќ
on page 29
Set up Remote
Access
Access the content of your internal
storage from a computer or device
on the Internet.
вЂњSetting up Remote
AccessвЂќ on page 31
Advanced
Settings
Configure advanced settings for
Internet connections, wireless
connections, storage, devices, system
administration, security, and the local
network (LAN).
вЂњAdvanced SettingsвЂќ on
page 36
Alert
Click to display recent alerts about
new firmware and network issues and
shortcuts to important settings.
MY NET N900 CENTRAL
USER MANUAL
22
BASIC SETTINGS AND TASKS
Reviewing Current Settings
The My DashboardвЂ™s home screen is a simple snapshot of the routerвЂ™s configuration with the
most essential information in one screen. It includes summary information for wireless
settings, Internet status, guest network, parental control, and storage.
1. Review the following settings on the My Dashboard home page. If you used
Easy Setup, you may have changed the settings from the defaults already. If not, you
can change them here.
Setting
Description
Network Name (2.4 GHz)
Unique identifier of the 2.4 GHz network.
Password
Password for accessing the 2.4 GHz network.
Device Name
Name assigned to the router.
Internet Status
Router is Connected to or Disconnected from
the Internet.
Number of Devices Connected
Number of devices connected to the router.
Guest Network Name
To provide guests with limited access to the
Internet, you can create a guest network. The
guest network is disabled by default.
Guest Password
Password for accessing the guest network.
Network Name (5 GHz)
Unique identifier of the 5 GHz network. This
network is generally used for media and smart
devices because it minimizes interference that
might interrupt media streaming.
Password
Password for accessing the 5 GHz network.
Attached Storage
Status of a storage device connected to the
routerвЂ™s USB port.
Internal Hard Drive
Status of the routerвЂ™s internal drive.
MY NET N900 CENTRAL
USER MANUAL
23
BASIC SETTINGS AND TASKS
Setting
Description
Internet Security and Parental Control
status
If status is Enabled, this feature controls access
to the Internet by restricting dangerous or
undesirable web access. Disabled by default.
See вЂњSetting Up Parental ControlsвЂќ on page 59.
WD2go Remote Access
Displays information about remote access
capability:
Status
Ready - Remote access port enabled but not
connected yet
Connected - Remote access port enabled
and connected
Disabled - Remote access port disabled
Failed - Connection failed
Connecting - Attempting connection
Mobile Devices
Number of mobile devices set up for remote
access
Web Access
Number of web accounts (email accounts)
created for remote access
See вЂњSetting up Remote AccessвЂќ on page 31.
2. To change a setting, click the arrow to the right of the setting to display another screen
or a list of options.
Connecting to the Internet
To check or troubleshoot your Internet connection:
1. Click the Connect to Internet icon to display a diagram showing you how to connect
the router cables.
MY NET N900 CENTRAL
USER MANUAL
24
BASIC SETTINGS AND TASKS
2. Click Next. A screen displays the status of the connections: from the computer to the
router and from the router to the Internet:
3. If a connection succeeds, a check mark displays above it:
a. Click Next to display the Internet connection successful screen.
b. Click Next to display the My Dashboard home page again.
4. If the connection to the Internet fails
a. Click Next for more help. If the second attempt fails, the following screen displays:
b. You have two options:
From the Internet Connection Type drop-down list, select the type of connection
you want to make and enter the required information.The default connection type
is PPPoE. Click Next.
To proceed without setting up your Internet connection, click Skip.
In either case, the My Dashboard home screen displays.
Note: If the Internet connection does not succeed, see вЂњAdvanced WAN
(Internet) CategoryвЂќ on page 38 for information about the Internet Setup
screen.)
MY NET N900 CENTRAL
USER MANUAL
25
BASIC SETTINGS AND TASKS
Configuring Wireless Settings
Once you configure wireless settings on the router, you can easily connect wireless devices
such as notebooks, laptops, tablets, PDAs, or smartphones to the Internet and to other
devices on the network.
To configure basic wireless settings:
1. Click the Set Up Wireless icon at the top of the page. The Set Up Wireless screen
displays.
2. View or modify the required wireless settings for the 2.4 GHz network and the 5 GHz
network.
Setting
Description
Network Name
Name given to the wireless network.
Password
Password for accessing the wireless network.
3. Click Save.
MY NET N900 CENTRAL
USER MANUAL
26
BASIC SETTINGS AND TASKS
Setting Up Storage
You can set up your routerвЂ™s internal hard drive or an attached USB storage device as a
network share.
Note: If you are setting up a USB storage device, make sure it is properly
connected to the routerвЂ™s USB port.
1. Click the Set Up Storage icon to display the first screen of the storage wizard.
2. Click Next to display a list of connected storage devices and the internal hard drive.
MY NET N900 CENTRAL
USER MANUAL
27
BASIC SETTINGS AND TASKS
3. Select the device you want to set up and click Next to display the Step 3. Share
function for storage screen.
4. If you select internal hard drive storage, the following screen displays:
Note: If the storage device is locked, enter the deviceвЂ™s password as prompted.
5. In the table, select the check box(es) for the desired services. The services allow you to
serve the contents stored on the internal hard drive or a connected USB device using
Share (SMB), DLNA, iTunes, and FTP.
6. Enter a Workgroup Name to enable devices in the same workgroup to share
resources.
7. Create or change your user account by entering a user name and password for
accessing content on the internal hard drive or a connected USB device (e.g., SAMBA
share or FTP access). The default value is Public Share.
8. Click Next to save your settings.
9. On the Step 4 screen, do one of the following:
Click Back to select another storage device from the list. Repeat steps 3-8 for each
device.
Click Finish. The My Dashboard home screen appears.
MY NET N900 CENTRAL
USER MANUAL
28
BASIC SETTINGS AND TASKS
Adding a Wi-Fi Device
To connect a WPS-enabled wireless device, press the WPS button on the front of the router
or enter a PIN on the deviceвЂ™s Wi-Fi connection page. If the device is not capable of WPS,
you can still connect to the router using a network name and password.
1. Click the Add a Wi-Fi Device icon.
2. Select one of the two listed options and follow the appropriate procedure below.
Connecting a WPS-Enabled Device
1. Click the Click here to connect using WPS link to display the screen shown below:
2. Select one of the three WPS methods:
a. Method 1: Push Button: Press the WPS button on the front of the router or click the
virtual button on this screen. On your wireless device, press the physical WPS
button or click the virtual WPS button.
b. Method 2: Device PIN: Enter the wireless deviceвЂ™s WPS PIN code.
c. Method 3: Router PIN: If prompted by your wireless device, enter the WPS PIN
shown on the screen into your wireless device.
MY NET N900 CENTRAL
USER MANUAL
29
BASIC SETTINGS AND TASKS
Note: The label on the bottom of the router displays the default PIN. You can
change the PIN on the Wi-Fi Protected Setup screen. (See вЂњAdvanced
WAN (Internet) CategoryвЂќ on page 38.) Once you change the PIN, the
default value is invalid unless you reset the router to default values.
3. Click Next.
Connecting a Device That is Not WPS Enabled
1. On the Add a Wi-Fi Device screen (above), click the Click here to connect by
entering network name and password link:
2. Using the values shown on the screen, enter the following into your wireless deviceвЂ™s
Wi-Fi connection screen as prompted:
The Wi-Fi network SSID of the wireless network you want to use
The password for the wireless network you selected
Note: By default there is no password. If a password was configured during
setup, that password displays in the Password field.
3. Click Close.
MY NET N900 CENTRAL
USER MANUAL
30
BASIC SETTINGS AND TASKS
Setting up Remote Access
Remote Access enables you to access your files from wherever you are as long as you have
an Internet connection. You can access photos and files stored in the routerвЂ™s internal hard
drive using the WD Photos and WD 2go mobile apps and set up remote and secure web
access to stored files by means of the WD2go.com website.
1. Click the Remote Access icon. The Set up WD 2go Remote Access screen displays:
Adding Mobile Access
1. Click Add Mobile Access to display the Step 1: Download App screen.
2. Download the WD Photos and/or WD 2go apps from your app store.
MY NET N900 CENTRAL
USER MANUAL
31
BASIC SETTINGS AND TASKS
3. Click Next to generate and display the activation code for your device:
4. Open the WD app on your mobile device:,
5. Select your router, and enter the activation code as prompted. Click Activate.
6. On the router My Dashboard screen that displays the activation code, click Finish.
MY NET N900 CENTRAL
USER MANUAL
32
BASIC SETTINGS AND TASKS
Adding Web Access
1. On the Set up WD 2go Remote Access screen (see page 31), click Add Web Access to
display the first step of the wizard.
2. Enter the email address and full name of the user for whom you are setting up an
account and click Next.
3. When the screen indicates that the email has been sent, click Finish.
4. Check your email for further instructions on accessing your stored files and data.
MY NET N900 CENTRAL
USER MANUAL
33
BASIC SETTINGS AND TASKS
5. In a browser, sign in to https://www.wd2go.com/ using the associated email address
and password (see page 31).
6. Click Submit to display the My WD Devices screen.
7. Click View Shares to display the routerвЂ™s share(s).
MY NET N900 CENTRAL
USER MANUAL
34
BASIC SETTINGS AND TASKS
8. Click + Open in Explorer to view the content of the share
Note: Mac users follow a similar procedure in Finder.
For further information, please see the online FAQs.
MY NET N900 CENTRAL
USER MANUAL
35
ADVANCED SETTINGS
5
Advanced Settings
This chapter contains the following topics:
Introduction
Typical Advanced Settings Screen
Advanced WAN (Internet) Category
Advanced WAN (Internet) Category
Advanced LAN Category
Security Settings Category
Remote Access Category
Remote Access Category
Additional Features Category
Admin Category
Introduction
Chapter Organization
This chapter is organized by categories, represented by icons at the top of the
My Dashboard screens. For each category, this chapter includes descriptions of the screens
and an alphabetical list of screen settings. It defines settings only once within a category and
omits settings that do not require definition.
Accessing Advanced Settings Screens
The Advanced Settings icon on any basic My Dashboard screen takes you to icons and
screens for specifying more detailed settings and advanced functions than those discussed
in the previous chapter.
Note: Another way to access the Advanced Settings screen is to click the arrow
to the right of the setting on the basic screen, for example,
on
the My Dashboard screen. When a вЂњbasicвЂќ icon has a small Advanced
Settings icon to its upper left, you are configuring that functionвЂ™s
advanced settings. For example, the icon for Internet Settings looks like
this:
MY NET N900 CENTRAL
USER MANUAL
36
ADVANCED SETTINGS
Typical Advanced Settings Screen
Advanced Settings Categories
Close button
Tabs
Note: To close an Advanced Settings screen, click the Close button at the top
of the screen. The My Dashboard home screen displays.
MY NET N900 CENTRAL
USER MANUAL
37
ADVANCED SETTINGS
Advanced WAN (Internet) Category
Internet Status Screen
Purpose: Displays current Internet connection details. Allows you to renew or release a DHCP
IP Address or to connect or disconnect a PPTP/PPPoE/L2TP connection.
Connection to Internet
Indicates whether the router is connected to an
Internet Service Provider (ISP).
Connection Type
Can be Static IP, Dynamic IP (DHCP), PPPoE, LT2P, or
PPTP (Username/Password).
Connection Up Time
Days, hours, minutes, and seconds the connection
has been active.
Default Gateway
The IP address of the device to which your router is
connected.
DHCP IP Address
IP address assigned dynamically by a DHCP server.
Click the Renew button to renew the address or the
Release button to return it to the pool for other
clients.
IP Address
The WAN/Internet IP address assigned to your router
by the ISP.
MAC Address
Unique identifier that the manufacturer assigns to a
device.
Physical Link to WAN
Indicates whether the router has established a physical
link to the modem.
Primary DNS Server/Secondary DNS
Server
The primary and secondary DNS Server addresses are
configured and maintained by your ISP. Contact your
ISP for this information.
MY NET N900 CENTRAL
USER MANUAL
38
ADVANCED SETTINGS
Subnet Mask
The subnet mask controls which subnet the
computers connected to the router belong to. In most
cases, the default value of 255.255.255.0 is sufficient
as it allows up to 255 unique devices on the network.
Internet Setup Screen
Purpose: Configure your Internet connection type.
Address Mode
Select to assign the router either a static or a dynamic
IP address.
DNS Mode
Method by which names are associated with IP
addresses.
If Internet Connection Type is: PPPoE, PPTP, or L2TP (Username/Password):
MAC Address
Identification number assigned to the router by the
manufacturer.
Note: With some ISPs, you may have to set the MAC
address to match the MAC address of your previous
router.
Clone Your computerвЂ™s MAC Address button:
Copies the MAC address of the computer that you are
currently using into the MAC address field. This
allows the router to present your computer's MAC
address to your ISP.
Maximum Idle Time
Number of minutes the connection can be idle; 0 (zero)
means the disconnection can last indefinitely.
MTU (Maximum Transmission Unit)
Size (in bytes) of the largest protocol data unit that can
be transmitted over the network. The default value is
1500.
Password/Verify Password
Password for accessing the ISP.
Primary/Secondary DNS Server
The primary DNS Server is the first DNS server you
want to use. For DHCP connections, this is optional. If
you enter a primary DNS server when using DHCP, it
will override your ISPs DNS server.
The secondary DNS Server is the one that will be used
if the primary DNS server is not reachable. This entry is
optional.
MY NET N900 CENTRAL
USER MANUAL
39
ADVANCED SETTINGS
Reconnect Mode
Select one of the reconnect modes for your PPPoE,
PPTP, or L2TP connection:
вЂў Always On вЂ“ Your Internet connection will remain
connected and reconnect if there is a
disconnection from the server.
вЂў On Demand вЂ“ Your Internet connection will
disconnect after the Idle time has passed. The
connection will automatically reconnect when a
client attempts to access the Internet.
вЂў Manual вЂ“ You can connect or disconnect the
Internet connection on the Internet Status page.
Service Name
Your ISP configures and maintains the Service Name.
Contact your ISP for this information.
Username
Username for accessing the ISP.
IPv6 Status Screen
Purpose: View all Internet and network connection details related to the IPv6 Internet protocol.
IPv6 Address
IPv6 address of your computer on the IPv6 network.
IPv6 Connection Type
Can be Static IPv6, Auto (SLAAC/DHCPv6), PPPoE,
or Link-local Only connection type to connect to your
ISP.
IPv6 Default Gateway
The IPv6 address of the gateway device to which your
router is connected.
LAN IPv6 Link-Local Address
The LAN link-local IPv6 address of your router that is
assigned automatically.
Name (if any)
Name of the computer associated with the IPv6
address.
MY NET N900 CENTRAL
USER MANUAL
40
ADVANCED SETTINGS
IPv6 Screen
Purpose: Configure the IPv6 connection type and internal network settings of your router.
Autoconfiguration Type
From the drop-down list, select the type of auto
configuration. Options are SLAAC+RDNSS,
SLAAC+Stateless DHCP, and Stateful DHCPv6.
Enable Automatic IPv6 address
assignment
Toggle to On to enable automatic IPv6 address
assignment to the computers and devices on your
network.
Enable DHCP-PD
DHCP Prefix Delegation allows your router to
dynamically obtain an IPv6 prefix using DHCPv6. The
same prefix is used for your local network devices.
IPv6 Address Lifetime
Enter the number of minutes an IP address should be
in effect.
IPv6 Address Range (Start and Finish)
If automatic IPv6 address assignment is enabled, enter
the range of IPv6 addresses that can be assigned to
the computers and devices on your network.
LAN IPv6 Address
Initial network address of your router. If you change it
here, you may need to change PC network settings to
access the network again.
Router Advertisement Lifetime
Number of minutes an IP address can be advertised
(e.g., 30 minutes).
Dynamic DNS Screen
Purpose: Host a server (for example, an FTP or a game server) using a domain name
purchased with your dynamically assigned IP address from a DDNS service provider. Once you
have DDNS set up, others can just enter your domain name into their browser or FTP client, for
example, and connect just as they would to any other site, even if your ISP changes your
router's WAN IP address.
DNS (Domain Name Server)
System that translates text host names into numeric IP
addresses used to uniquely identify any device
connected to the Internet. From the drop-down list,
select DynDNS.org or TZO.
Dynamic DNS (Domain Name System)
Click On or Off to enable or disable dynamic DNS.
Host Name
The host name (domain name) you configured/
purchased from your DDNS service provider.
Password (Key)/Verify Password (Key)
Password required for accessing your DDNS account.
For DynDNS.org, this is your account password. For
TZO, this is your account key.
MY NET N900 CENTRAL
USER MANUAL
41
ADVANCED SETTINGS
Status
Status of whether your router can successfully
connect to and update your IP address on the DDNS
service.
Username (Email)
Username (email) required to access your DDNS
account. For DynDNS.org, this is the username
required to access your account. For TZO, this is the
email address required to access your account.
Wireless Setup Screen
Purpose: Change wireless settings and turn SSID Broadcast and WMM QoS on or off.
Channel
Accept the default (Auto) or select a channel from the
drop-down list.
Channel Width
The default setting of 20/40/80 MHz (Auto) for the 5
GHz network is recommended unless you are having
connectivity issues. The default for the 2.4 GHz
network is 20/40 MHz (Auto).
Network Mode
For the 2.4 GHz band, the default network mode is
Mixed 802.11 b+g+n. Keep this setting for maximum
client compatibility. The other network modes are
802.11b only, 802.11g only, 802.11n only, Mixed
802.11 b+g, and Mixed 802.11 g+n.
For the 5 GHz band, the default network mode is
Mixed 802.11 a+n+ac. Keep this setting for maximum
client compatibility. The other network modes are
802.11a only, 802.11n, Mixed 802.11 a+n, and Mixed
802.11 n+ac only.
Network Name (SSID)
Name given to the wireless network.
Password
Password for accessing the wireless network.
For some Enterprise modes, additional fields display:
вЂў Radius Server IP Address
вЂў Port
вЂў Shared Secret
MY NET N900 CENTRAL
USER MANUAL
42
ADVANCED SETTINGS
Security Mode
Select the type of security to be applied to the wireless
network.
Options from strongest to weakest security include:
вЂў WPA2-Personal
вЂў WPA/WPA2-Personal
вЂў WPA-Personal
вЂў WEP (Wired Equivalent Privacy)
вЂў WPA2-Enterprise
вЂў WPA/WPA2-Enterprise
вЂў WPA-Enterprise
If 802.11n or 802.11ac is selected as the network
mode, WEP is not available, but it is available to
802.11b-only, 802.11 g-only, 802.11 a-only, and a mix
of these.
WPA (Wi-Fi Protected Access) and WPA2 are security
protocols that use a dynamically changing key. WPA2
is the second generation protocol that uses stronger
AES (Advanced Encryption Standard) encryption. The
third option is None.
WPA/WPA2 mixed security mode provides better
compatibility with legacy devices. However, for better
performance and higher security, WPA2 security mode
is highly recommended.
SSID Broadcast
Your wireless clients identify and connect to your router
using the network name or SSID (Service Set Identifier).
The SSID
broadcast is On by default. For additional security, you
can turn SSID broadcast to Off.
WMM QoS
WMM (Wi-Fi Multimedia) is a standard that defines
quality of service (QoS) in Wi-Fi networks, prioritizes
capability, and optimizes video and audio performance.
WMM QoS is forced to On (grayed out) when the
Network mode set includes when the Network mode
set includes 802.11ac. If you select any mode not
including 802.11n or 802.11ac, you have the option of
turning WMM QoS Off.
MY NET N900 CENTRAL
USER MANUAL
43
ADVANCED SETTINGS
Wi-Fi Protected Setup (WPS) Screen
Purpose: Add a new wireless device into this network using the WPS push button or PIN;
generate a new PIN or set it to the default value.
Device PIN Code
Enter the wireless deviceвЂ™s WPS PIN code and click
Start.
Enable RouterвЂ™s WPS PIN
Personal identification number for WPS authentication.
Enable WPS
Enable the router to establish a secure connection to
other WPS-enabled Wi-Fi devices. Enabled by default.
Push Button Method
Click the blue WPS button on the screen to activate
the connection process.
Router PIN Code
Enter the PIN shown on the screen into the wireless
deviceвЂ™s screen. The default PIN is printed on the
bottom of the router.
Optionally, click the appropriate button to generate a
new PIN or reset it to the default value.
Guest Access Screen
Purpose: Allow visitors access to the 2.4 GHz and 5 GHz wireless bands. For information on
setting up guest access, see вЂњEnabling Guest AccessвЂќ on page 58.
Advanced LAN Category
MY NET N900 CENTRAL
USER MANUAL
44
ADVANCED SETTINGS
Host and LAN Settings Screen
Purpose: View and change host name, subnet mask, and LAN IP address, and enable
DNS (Domain Name System) proxy.
Host Name
Name identifying the router on the network.
LAN IP address
IP address of the router on the network (when router is in
router mode). This IP address determines which IP addresses
are used by other devices on your local network.
Subnet Mask
The subnet mask controls which subnet the computers
connected to the router belong to. In most cases, the default
value of 255.255.255.0 is sufficient as it allows up to 255
unique devices on the network.
Enable DNS Proxy
Enable for LAN-side clients to use the router to relay DNS
queries to the Internet.
Enable as the Local
Master Browser
The local master browser works on a subnet providing a
resource list of available clients.
DHCP Server Settings Screen
Purpose: Enable or disable DHCP server, which provides IP addresses to the LAN-side
computers dynamically (when your router is in router mode).
DHCP IP Address Range
Range of IP addresses that can be assigned by the DHCP
server.
DHCP Lease Time
Amount of time for which the device or computer leases the
DHCP address. If the client does not renew the lease before it
expires, the IP address returns to the pool for other clients.
Enable DHCP Server
Enable the server that provides an IP address to the LAN-side
computers dynamically.
Local Domain Name
You can append a local domain name to your clients' Internet
requests to avoid entering the complete address of commonly
used Internet domains.
MY NET N900 CENTRAL
USER MANUAL
45
ADVANCED SETTINGS
Advanced Storage Category
Device and Client Tables Screen
Purpose: View the DHCP client table. This table shows all of the wired and wireless
devices that are connected to the router. You can manually add a device to the table.
Client Lease Time
Amount of time remaining on the clientвЂ™s IP address lease.
Device Name
Name of the device attached to your network.
IP Address
IP address of a device being added on your network.
MAC Address
Unique identifier of the device being added.
Storage Screen
Purpose: You can update your user account and storage settings on this screen. (See
вЂњSetting Up StorageвЂќ on page 27.)
Device name
When you click the Show button, the name of the storage
device appears.
DLNA (Digital Living
Network Alliance)
Makes stored digital media contents available to networked
media players.
FTP
Uses the File Transfer protocol (FTP) to exchange files over
the network.
iTunes
Allows streaming of music to other devices in the network that
have iTunes.
Password
Enter the password of the person being granted access to the
private share and FTP service.
MY NET N900 CENTRAL
USER MANUAL
46
ADVANCED SETTINGS
Public Share
Select to enable public access (no authentication) to the
shares/services. Selected by default.
Share
Files sharing service among local network client devices using
the Samba protocol.
Storage
USB port on the router to which the storage device is
connected.
Storage Port
Click the Show button to display the number of the port (1 or
2) to which the storage device is attached.
User Account
Select to enable user account authentication access to the
private share and FTP service.
Username
To restrict access, enter the username of the person being
granted access to the private share and FTP service.
Workgroup
A group of related computers on a LAN that share resources.
Configure your router and local networking devices to the
same Workgroup name to share resources.
Safely Remove Screen
Purpose: Use this screen to safely remove USB storage devices connected to the routerвЂ™s
USB port(s).
Click the button to the right of the USB device name on the
table to safely detach the USB storage drive.
Eject button
Format Screen
Purpose: Use this screenвЂ™s formatting and restoring commands to delete all data on the
internal storage drive.
WARNING!
We strongly recommend that you back up important files to
another storage device before executing these commands.
Format the internal HDD
Click Format to erase all content on the user partition of the
internal storage drive.
Restore the internal HDD
Click Restore to restore the internal drive to its original
factory configuration. It is best to use Restore only if you
suspect the system file is corrupted.
AFP (Apple Filing Protocol Screen)
Purpose: Enable the AFP server for sharing files using Mac operating systems.
Enable AFP Server
MY NET N900 CENTRAL
USER MANUAL
To enable the AFP server, toggle to On. Required for Apple
Time Machine support.
47
ADVANCED SETTINGS
Security Settings Category
Firewall Screen
Purpose: Set up a firewall for this router to block specific incoming or outgoing traffic by
IP address and/or ports.
Action
From the drop-down list, select whether to allow or deny
incoming and outgoing traffic.
Allow incoming WAN ping
request
Select the checkbox to respond to ping requests from the
WAN.
Destination
Local network (LAN) or Internet (WAN).
Destination IP Range
Range of IP addresses where the traffic is destined.
IPv4 SPI Firewall
Toggle this button to On to enable the firewall.
Name
Name to identify the firewall rule.
Port Range
Network traffic port range that will be applied in the firewall
rule.
Protocol
Protocol that will be applied in the firewall rule. Available
options are TCP, UDP, ICMP, and TCP+UDP.
Source
Local network (LAN) or Internet (WAN).
Source IP Range
Range of IP addresses where the traffic initiates.
MY NET N900 CENTRAL
USER MANUAL
48
ADVANCED SETTINGS
DMZ Screen
Purpose: Set up a DMZ (Demilitarized Zone) to allow all incoming traffic to be forwarded to
a specific device (e.g., computer, phone, or game console) as if it were connected outside
of the router. If you are aware of the specific TCP and UDP ports that a service is using, we
recommend using port forwarding as an alternative.
Note: Firewall settings and Port Forwarding Rules supersede the
configured DMZ host.
Important: Because of serious security concerns, use this option only as a last resort.
DMZ IP Address
If DMZ is enabled, select a device from the drop-down list and
click the double arrows to populate the IP address, or
manually enter the computerвЂ™s IP address.
Enable DMZ
Toggle the button to On to enable DMZ.
MAC Filter Screen
Purpose: Control network access based on the MAC address of the client device.
Active
Status of the MAC filtering entry.
Computer Name
Name assigned to the computer for easier identification. From
the drop-down list, click the computer name to populate its
MAC address.
DHCP Client List
Computers and devices that are currently connected to your
router.
Double arrows
After selecting a computer from the DHCP Client List, click
the double arrows to populate the MAC Address box.
MAC Address
Unique identifier of your local network device being filtered.
MAC Filtering drop-down
list
The default setting is Turn MAC Filtering OFF. Other options
are:
Turn MAC Filtering ON and DENY computers listed to
access the network.
Turn MAC Filtering ON and ALLOW computers listed to
access the network.
Parental Controls Screen
Purpose: Control Internet access to specific websites and access periods. (See вЂњSetting
Up Parental ControlsвЂќ on page 59.)
MY NET N900 CENTRAL
USER MANUAL
49
ADVANCED SETTINGS
Remote Access Category
WD 2go Setup Screen
Purpose: On this screen you can enable remote access and check remote
connections, firewall settings, and WD 2go Service.
Enable Remote Access
Toggle to On to enable remote access.
Note: It may take a few minutes for the service to start
depending on your network configuration.
Connection Status
Indicates the status of the connection, for example:
Disable вЂ“ User has not selected the Enable Remote
Access check box and no mobile device has been added
yet.
Connecting вЂ“ Router is trying to connect to a mobile
device or a registered web access account. Please wait.
Connected вЂ“ Connection is now established to a
registered mobile device or a registered web access
account.
Failed вЂ“ Router could not establish a remote access
connection with the mobile device or web access
account. Check your Internet connection.
MY NET N900 CENTRAL
USER MANUAL
50
ADVANCED SETTINGS
Connection Type
Type of connection:
Ready вЂ“ Remote Access is Off, or user has not added a
mobile device or registered a web access account yet
while Remote Access is On.
Port Forwarded вЂ“ Direct peer-to-peer connection, the
desired state for better performance.
Relayed вЂ“ Router attempts to configure the network to
allow direct connections whenever possible. In cases
where this is not possible, it uses a relay connection. This
type of connection, while fully functional, may be slightly
slower since all data has to be transferred through a
central server that communicates between your remote
device and your router. In some cases, your ISP may
implement "double-NATing," which renders your router's
IP address unreachable for a direct connection. In this
situation, consult your ISP for alternatives to enable portforwarded connections.
Unknown вЂ“ Problem with your Internet connection.
Firewall Settings
Click one of the following:
Automatic вЂ“ Establishes a direct connection between
your device and the router. If the connection cannot open
the ports on the router, a relay connection is established.
XP Compatibility вЂ“ Establishes a connection through
ports 80 and 443. If these ports are unavailable, a relay
connection is established. This option is required if you are
using your Web Access account on a Windows XP OS.
WD 2go Service
If you suspect that your WD Media database has been
corrupted, click Refresh to rebuild it.
Mobile Access Screen
Purpose: Provides remote access to your media and data files in internal storage
using smartphones and tablets.
Add Mobile Access
Click to allow a smartphone or tablet to access media and
files stored on the routerвЂ™s internal hard drive. A wizard guides
you through downloading the WD2go or WD Photos app from
your mobile app store onto your mobile device.
Activate
Displays the activation code for your mobile device. Codes
are valid for 48 hours from the time of request and can be
used one time only.
New Device
Once you activate mobile access on your device, the name of
the device or associated email address displays along with
the mobile application being used.
Trash can icon
To remove mobile access for the device, click the icon to its
right.
MY NET N900 CENTRAL
USER MANUAL
51
ADVANCED SETTINGS
Web Access Screen
Purpose: Enables you to access your media and files stored in internal storage.
Add Web Access
Click to allow remote access to your stored media and files
from any computer through the WD 2go web site.
URL for web access
Click the https://www.wd2go.com link to display the WD 2go
sign-in screen. For more information, see online FAQs in the
upper right corner of the screen.
Additional Features Category
Port Forwarding Screen
Purpose: Open a single port or a range of ports in your router and redirect data. Applies only
to traffic coming from the Internet. For information on port forwarding, see вЂњEnabling Port
ForwardingвЂќ on page 74.
MY NET N900 CENTRAL
USER MANUAL
52
ADVANCED SETTINGS
ALG (Application Level Gateway) Screen
Purpose: Enable or disable Application Level Gateway (ALG) configuration. Enabling allows
certain clients, such as PPTP, IPSec, or SIP, to communicate more reliably through a firewall
by adjusting certain parameters in the message headers.
IPSec (VPN)
Turn On (default) IPSec ALG if you use a IPSec client to dial into
your corporate network via the Internet.
PPTP (Point-to-Point
Tunneling Protocol)
Turn On (default) PPTP ALG if you use a PPTP client to dial into
your corporate network via the Internet.
SIP (Session Initiation
Protocol)
A signaling protocol for Internet Telephony. Turn On (default) SIP
ALG if you use VoIP telephone service over your Internet
connection.
Routing Screen
Purpose: Define static routes to specific destinations.
Active
Select the check box to enable the routing entry.
Destination IP
IP address/network to which the data is sent.
Gateway
Enter the gateway IP address through which this router can be
reached. The gateway IP should be reachable from your router.
Interface
Select the interface (WAN or LAN) for the routing entry.
Name
Enter a name for the routing entry.
Netmask
Enter a netmask for the Destination IP to define the destination
network.
FasTrack Plus QoS
Purpose: Configure FasTrack Plus QoS powered by WD FasTrack Plus QoS technology.
This technology improves your online gaming experience by ensuring that your entertainment
traffic is prioritized over other network traffic such as FTP or Web.
Enable FasTrack Plus
QoS
Enable or disable the QoS application to prioritize different client
applications/traffic types over the Internet.
Local IP Range
IP address range of the device(s) on your local network the rule
applies to.
Local Port Range
Port range of the application(s) on your local network the rule
applies to.
Name
Name given to the service/client for the classification entry.
Priority
When creating a rule, select the precedence in which the
application or device sends data over the network compared to
other applications or devices. The default value is 1-Highest.
Protocol
Internet protocol for transferring data. Select TCP or UDP.
Remote IP Range
Remote IP address range of the service on the Internet the rule
applies to.
MY NET N900 CENTRAL
USER MANUAL
53
ADVANCED SETTINGS
Remote Port Range
Remote port range of the service on the Internet the rule applies
to.
Set Uplink Speed at
The uplink speed (in Kbps) at which data can be transferred
from the router to your ISP. The Auto (default) setting
automatically detects the uplink speed. You can select other
values from the drop-down list or enter your own. QoS
prioritizes all Internet traffic based on this setting.
Enhanced WMM Screen (My Net N900 Router)
Purpose: Wi-Fi Multimedia (WMM) refers to QoS (Quality of Service) over Wi-Fi. QoS enables
Wi-Fi access points to prioritize traffic and optimizes how different applications share network
resources.
Enable Enhanced WMM
Enhanced WMM is enabled by default. This feature prioritizes
the traffic of various wireless (WI-Fi) applications.
Network UPnP Screen
Purpose: Enable or disable peer-to-peer Plug and Play functionality for network devices.
Enable/Disable UPnP IGD
(Internet Gateway Device)
MY NET N900 CENTRAL
USER MANUAL
Toggle to enable or disable Universal Plug and Play functionality
for network devices.
54
ADVANCED SETTINGS
Admin Category
Administrator Screen
Purpose: The admin account manages the router interface. The admin has read/write access and
can create passwords.The default password is password. To keep your router secure, it is a best
practice to create a new password. See вЂњChanging the Administrator PasswordвЂќ on page 64.
Enable HTTPS Server
Click to enable or disable Hypertext Transfer Protocol Secure
(HTTPS), a combination of Hypertext Transfer Protocol (HTTP) with
SSL/TLS protocol. It provides encrypted communication and
secure identification of your web connections to your router.
Enable Remote
Management
Click to allow managing the router from a remote location.
Remote Admin Port
The port that will be used for remote management connections.
Default is 8080. The Remote Admin Port cannot be used in an
external port range of any port forwarding rules.
Use HTTPS
Click to enable or disable use of HTTPS for remote management of
the router.
Time Settings Screen
Purpose: Configure, update, and maintain the correct time on the router manually or automatically
by NTP (Network Time Protocol).
Adding User Defined NTP
Server
MY NET N900 CENTRAL
USER MANUAL
Enter the name of NTP server of your choice and click Add.
55
ADVANCED SETTINGS
Automatic Internet Time
Synchronization
Automatically synchronizes your router's clock with an Internet
time server.
Daylight Saving Dates
If you select Daylight Saving time, from the drop down lists, select
the month, week, day of the week, and time of the start and end of
Daylight Saving time in your time zone.
Daylight Saving Offset
If you select Daylight Saving time, from the drop-down list, select
the daylight saving offset. The offset is a formula that combines a
time of day with the time zone and is based on a 24-hour clock.
Enable Daylight Saving
Click to enable or disable Daylight Saving time.
NTP Server Used
From the drop-down list, select the name of the NTP server to be
used.
Time
Current date and time at the routerвЂ™s location.
Time Zone
Select the time zone in which the router is located.
Firmware Update Screen
Purpose: Check for router firmware updates and upload new firmware.
For information on performing updates, see вЂњUpdating the RouterвЂ™s FirmwareвЂќ on page 69.
System Screen
Purpose: Save configuration settings on your local hard drive, load configuration settings, restore
factory default settings, and log out.
For information on factory resets and rebooting, see вЂњRestoring the Router to Factory DefaultsвЂќ on
page 70 and вЂњRebooting the RouterвЂќ on page 70.
Logout
Click Logout.
Restore Settings from a File
To restore settings from a file, click Choose File and select it. Click
Restore Configuration.
Save settings to a file
Click Save Configuration. The routerвЂ™s current configuration is
downloaded to your computer.
Connection Check Screen
Purpose: Use ping tests to check connectivity between the router and network/Internet
hosts.
Connection Check Result
The result of whether your router can reach the specified host
name or IP address.
Host Name or IP Address
Enter the host name or IP address of a computer you want to
locate on the network. Click Ping.
MY NET N900 CENTRAL
USER MANUAL
56
ADVANCED SETTINGS
Registration Screen
Purpose: Register your router if you have not already done so. Registering enables WD to notify
you of updates to the firmware and send you important information.
Log Screen
Purpose: Display and save logs generated by the router.
Log Level
From the drop-down list, select the alert level of the log you want to
generate. Options are Debug, Notice, and Warning.
Log Table
Click the tabs to reveal the log pages to view, clear, or refresh the
table.
Log Type
From the drop-down list, select the type of log you want to
generate. Options are System, Attack, and Drop. The default is
System.
Save Log File to Local Hard
Drive
Click Save to copy the contents of the system log to a file on your
computer.
Language Screen
Purpose: The language is normally auto-detected based on your web browser settings. If the
selected language is not the language you desire, you can manually choose another language.
Select language
From the drop-down list, select the language in which you want the
user interface to display.
Device Mode Screen
Purpose: Configure your router to operate in either router mode or AP (access point) mode. When
the router is used as an access point, it disables certain services, such as DHCP and routing, to
turn the router into a Wi-Fi access point, allowing you to expand your existing wireless network
without replacing your router.
For information about changing to AP mode, see вЂњUsing the Router as an Access PointвЂќ on page
71.
MY NET N900 CENTRAL
USER MANUAL
57
PERFORMING ADVANCED TASKS
6
Performing Advanced Tasks
This chapter describes the most important tasks the administrator performs in setting up
and maintaining the My Net N900 Central router. It includes the following topics:
Enabling Guest Access
Setting Up Parental Controls
Changing the Administrator Password
Accessing Files on the Router or an Attached USB Drive
Updating the RouterвЂ™s Firmware
Restoring the Router to Factory Defaults
Rebooting the Router
Using the Router as an Access Point
Configuring UPnP
Enabling Port Forwarding
Accessing My Net View (Windows)
Enabling Guest Access
A guest network allows visitors to get Internet access without giving them access to your
home network.
To enable guest access:
1. On the Advanced Settings screen, click the Wireless icon to display the
Wireless/Guest Access screen.
2. Click the Guest Access tab.
3. To turn on access to a wireless network (2.4 GHz and/or 5 GHz band), toggle the On/
Off button to On.
MY NET N900 CENTRAL
USER MANUAL
58
PERFORMING ADVANCED TASKS
4. Specify the following:
Setting
Description
Guest Network Name
Accept the default value or enter another name for the wireless
network.
Security Mode
The default value is None. To restrict guest access, select the
type of security needed from the drop-down list:
вЂў WPA - Personal
вЂў WPA2 - Personal
вЂў WPA/WPA2 - Personal
вЂў None
Password
Create a password for the guest user to prevent an
unauthorized user from accessing your guest network.
5. Click Save.
Setting Up Parental Controls
Registering Parental Controls
Set up your router with parental controls that restrict the websites, times, and content a user
can access on the Internet. You can set controls on a master level that apply to all devices
connected to the router or to individual devices. You need to register the router to activate
Parental Control service for your router.
To set up parental controls:
1. On the Advanced Settings screen, click the Security icon to display the
Security/Parental Controls screen.
2. Click the Parental Controls tab.
MY NET N900 CENTRAL
USER MANUAL
59
PERFORMING ADVANCED TASKS
3. Toggle the Enable parental control button to On. The Security/Parental Controls
screen appears.
4. For Router location, select the region where the router is located.
5. Click Apply. The screen expands to enable you to register the router and the devices
using the router.
6. In the Router Registration section, enter your email address and click Register Router.
After registration takes place, open the confirmation that was sent to your email
address. Follow the instructions in the email to confirm your registration of Parental
Controls. Parental Controls are activated about fifteen minutes after you confirm your
registration.
7. On the Policy Management screen, enter your password and click Login.
MY NET N900 CENTRAL
USER MANUAL
60
PERFORMING ADVANCED TASKS
8. The main Parental Controls screen displays.
9. In the Device Information table, select the devices you want to register for parental
controls.
10. Click Register Device (at bottom of screen).
11. Click the WD Internet Parental Controls Policy Management link in the middle of
the page to launch the Device List View screen.
Managing Parental Controls
The Device List View screen enables you to manage parental controls on a master, device,
and time range level.
MY NET N900 CENTRAL
USER MANUAL
61
PERFORMING ADVANCED TASKS
User Information
On the Device List View screen, click UserInfo to display the User Information Setting
screen.
1. (Optional) Update the User name, Password and Password reset information.
2. Click Confirm to return to the Device List View screen.
Safe/Block List Setting
The Safe/Block List Setting enables you to enter up to 60 URLs and designate them as safe
or blocked. The safe/block list overrides any of the categories listed in the time block. These
are master settings, so they affect all devices on your network that have been registered for
parental controls.
1. On the Devices List View screen (see page 61), below Master Setting, click
Safe/Block. The Safe/Block List displays.
MY NET N900 CENTRAL
USER MANUAL
62
PERFORMING ADVANCED TASKS
2. Enter the URLs of sites to which you want to control access and select either Safe or
Block.
3. Click Save. The Device List view appears.
Time Block
The Time block enables you to filter web sites by time range. The web filtering levels include:
All вЂ“ Blocks all web access regardless of category.
Maximum вЂ“ Protects against social networks, video, and games. Includes all lower
level blocks.
High вЂ“ Protects against dating and all adult-related content. Includes all lower level
blocks.
Medium вЂ“ Protects against gambling, alcohol, and tobacco content. Includes all
lower level blocks.
Moderate вЂ“ Protects against occult, illegal acts, and advocacy. Includes all lower
level blocks.
Low вЂ“ Protects against pornography and hard core adult content.
None вЂ“ Does not provide blocking; allows all web access.
The default setting is Low.
1. On the Device List View screen (see page 61), below Master Setting, click Time Block
to display the Time Block Policy Setting screen.
2. Select the Time Range and the Filtering Level it should apply to. By default, the
screen shows a 24-hour range (12 A.M. - 12 A.M.); you can adjust the range to your
preferences. For example, you may want to block all web access from (8 A.M.- 5 P.M.).
MY NET N900 CENTRAL
USER MANUAL
63
PERFORMING ADVANCED TASKS
Note: Use the Update button to change the Filtering Level for the whole table.
For example, if you click Maximum and then Update, the Time Block
Policy table changes all times within the time range to Maximum. The
filtering level affects the whole table if you set the time range from
12 A.M. - 12 A.M.
3. Click Save.
Managing at the Device Level
If you prefer to apply controls to selected devices rather than at the Master level, you can do
that too.
1. On the Safe Block List Setting or the Time Block Policy Setting screen, click Back to
Device List View.
2. Select a device in the Device Table and click the type of block (Safe/Block or
Time Block) you want to apply.
3. Follow the same steps as you do for applying a block on a master level.
4. Click Save.
Changing Parental Control Settings Remotely
To access the WD Internet Security and Parental Control Policy Management utility remotely:
1. Type www.wdinternetsecurity.com in your browserвЂ™s address field.
2. Log in using your parental control username (email) and password.
Changing the Administrator Password
It is a good practice to change the administrator password for accessing and managing the
router.
1. On the Advanced Settings screen, click the Administrator icon to display the
Admin/Administrator screen.
MY NET N900 CENTRAL
USER MANUAL
64
PERFORMING ADVANCED TASKS
2. Enter the new administrator password in the Password and Verify Password fields and
click Save. The password may have a maximum of 15 characters.
Accessing Files on the Router or an Attached USB Drive
To access files stored on the internal drive or on an attached WD USB storage drive such as
a WD Passport or My Book, you have two options:
Note: For information on installation, see вЂњInstalling WD Software from the CD
(Optional)вЂќ on page 18 or вЂњUsing a Browser for Setup (Windows or Mac)вЂќ
on page 13.
If you installed WD Quick View on your computer during setup, use the
WD Quick View icon in the system tray of a Windows computer or in the Menu bar of
a Mac computer to select the storage device and display a menu of options.
Note: WD SmartWare provides online Help for its procedures.
Use your browser.
Using WD Quick View (Windows or Mac)
Once you install WD Quick View, you can use a shortcut to access your files and folders on
an attached storage device.
Windows
1. Right-or left-click the WD Quick View icon
in the system tray to display a menu.
2. Move the pointer over or click to select your My Net N900 Central router and display a
submenu.
The internal storage and USB shares display in Windows Explorer:
MY NET N900 CENTRAL
USER MANUAL
65
PERFORMING ADVANCED TASKS
Mac
1. Click the WD Quick View icon
in the menu bar to display a menu, and move
the pointer over the name of your My Net N900 Central router to display a
submenu.
2. Select Open.
3. If you are prompted for a username and password, enter the username and password
that you created when you set up external storage. If a password was not created,
select or enter guest. Click Connect.
4. Select the volume(s) to mount and click OK.
MY NET N900 CENTRAL
USER MANUAL
66
PERFORMING ADVANCED TASKS
5. In Finder, the My Net N900 Central router displays below Shared. The Public folder of
the internal storage and the name of your USB device display in the right pane:
6. To view the contents of the drives, double-click the Public folder or the name of
your storage device.
Using a Browser (PC)
To access the files stored on the internal drive or on a USB drive connected to the router,
make sure that the drive was properly set up as described in вЂњSetting Up StorageвЂќ on
page 27. After the setup is complete, access it through the network as follows:
Windows XP
1. Click Start > Run and type \\mynetn900c. If the routerвЂ™s default name was changed
from the default host name, substitute the new name. The folder that displays represents
the external USB drive. Double-click the folder to access the drive.
Windows Vista/Win7
1. Click
> Start and in the Search programs and files box, type \\mynetn900c. If the
routerвЂ™s default host name was changed during setup, substitute the new name. The
folder that displays represents the external USB drive.
2. Double-click the folder to access its contents.
Note: If a password was set on the router during storage setup, at the prompts,
enter the username and the password that you created.
MY NET N900 CENTRAL
USER MANUAL
67
PERFORMING ADVANCED TASKS
Setting up a Share (Mac)
To access the files stored on the internal drive or on a USB drive connected to the router,
make sure that the drive was properly set up as described in вЂњSetting Up StorageвЂќ on page
27. After the setup is complete, access it through the network by doing the following:
1. Click Finder and then on the menu bar, click Go > Connect to Server.
2. Type smb://mynetn900c. If the routerвЂ™s default host name was changed during setup,
substitute the new name. The screen that displays lists the shares that can be mounted.
3. Select the volume(s) to mount and click OK.
4. If you are prompted for a username and password, enter the username and password
that you created when you set up external storage. If a password was not created,
select or enter guest. Click Connect.
MY NET N900 CENTRAL
USER MANUAL
68
PERFORMING ADVANCED TASKS
Updating the RouterвЂ™s Firmware
Note: For best results, upload the firmware using a wired connection.
1. On the Advanced Settings screen, click the Administrator icon.
2. Click the Firmware Update tab.
To check for the latest firmware version:
Important: Do not disconnect or turn off the router while the update is in
process.
1. Click Check Now. The router searches the WD website for a new firmware file.
If a new file exists, the latest firmware version and an Update Now button appear.
2. Click Update Now to begin the firmware update. A message informs you of how long
the upload will take. Please wait while the firmware update is taking place.
To update from a file:
1. Locate the firmware file on the WD Support site at
http://support.wdc.com and download it to your computer.
2. On the router screen, browse to the firmware file you saved and click Open. The file
name displays in the browser field on the router screen.
3. Click Upload. A message says how long the upload will take. Please wait while the
firmware update is taking place.
MY NET N900 CENTRAL
USER MANUAL
69
PERFORMING ADVANCED TASKS
Restoring the Router to Factory Defaults
You may want to reset the router to how it was when you bought it. You have two options for
restoring factory defaults: through the user interface or through the Reset button on the
bottom of the router.
To reset the router on the user interface:
1. On the Advanced Settings screen, click the Administrator icon.
2. Click the System tab.
3. Click Reset to the right of Reset to Factory Default Settings.
4. When a confirmation message displays, click OK.
5. Wait until the router reboots before using it.
To reset the router manually:
1. Press and hold the Reset button on the bottom of the router for at least 10 seconds.
When the reset finishes, the Power LED blinks.
Important: Do not reboot the router or close the application while the update is
taking place.
Rebooting the Router
WARNING!
To avoid data loss, before rebooting, stop all network and read/write
activities.
You can reboot the router two ways. If you are physically close to it, just press the On/Off
button on the router. If you cannot easily press the button:
1. On the Advanced Settings screen, click the Administrator icon.
2. Click the System tab.
MY NET N900 CENTRAL
USER MANUAL
70
PERFORMING ADVANCED TASKS
3. Scroll to the bottom of the screen and click Reboot.
Using the Router as an Access Point
You can use your My Net N900 Central router as an extender or access point (AP). Extender
mode can:
Add wireless coverage to a home network without wireless coverage.
Expand a home networkвЂ™s wireless coverage.
Note: To use the router in extender mode, the router must be connected by wire
to your computer.
To convert the router to extender mode:
1. On the Advanced Settings screen, click the Admin icon.
2. Click the Device Mode tab. The LAN Connection Type displays.
MY NET N900 CENTRAL
USER MANUAL
71
PERFORMING ADVANCED TASKS
3. From the Device Mode drop-down list, select ExtenderMode (wired AP). The LAN
Connection Type displays.
4. To configure LAN Connection Type, select Dynamic IP (DHCP) (default) or Static IP,
complete the required fields, and click Save. (See вЂњDevice Mode ScreenвЂќ on page 57
for details.) The screen indicates how long the process will take. The router reboots, and
the login screen displays.
Note: The IP address of your extender is the static IP you assigned or the DHCP
IP address assigned by your main router.
Setting up the DHCP Server on the My Net N900 Central Router
You can use your router as a DHCP server that assigns IP addresses to other components
of your network.
To set up a DHCP Server on My Net N900 Central Router:
1. On the Advanced Settings screen, click the LAN icon.
2. Click the DHCP Server Settings tab.
3. Enable DHCP server (On by default) and click Save.
4. Configure DHCP IP Address Range. By default the range is IP address 192.168.1.100
to IP address 192.168.1.149.
5. (Optional) Set a Local Domain Name.
6. Set the DHCP Lease Time (hours) and click Save.
7. Connect all the client devices.
8. Click the Device and Client Table tab. The table lists all of the client devices (wired/
wireless) and displays the number of devices connected along with the IP address and
MAC address of each device
MY NET N900 CENTRAL
USER MANUAL
72
PERFORMING ADVANCED TASKS
To manually assign a device a DHCP IP address:
1. In the Manual Added Device section of the screen, enter the deviceвЂ™s IP address, MAC
address, and device name.
2. Click Add/Update. The device information populates the device table below.
3. To update a device, select it in the table and click the Edit icon. Edit the information and
click Add/Update.
MY NET N900 CENTRAL
USER MANUAL
73
PERFORMING ADVANCED TASKS
4. To delete a device, disconnect it, select it in the table, and click the Delete (trash can)
icon.
Note: For more information, search for refer to KBA Answer ID 9423 on the
Support website at http://support.wdc.com.
Configuring UPnP
UPnP enables networked devices to discover each other and start working together on a
network.
To enable UPnP:
1. On the Advanced Settings screen, click the Additional Features icon.
2. Click the Network UPnP tab.
3. To enable UPnP, make sure the UPnP IGD button is set to On. (UPnP is enabled by
default.)
4. Click Save.
Enabling Port Forwarding
On a private network, port forwarding maps Internet traffic coming into a specific port to a
specific device on your LAN like a web server. Port forwarding is useful, for example, when
you host a game to which others want to connect. Instead of their being blocked because of
the router's network address translation (NAT), port forwarding allows their information to
come through.
To create port forwarding rules:
1. On the Advanced Settings screen, click the Additional Settings icon.
2. Click the Port Forwarding tab.
MY NET N900 CENTRAL
USER MANUAL
74
PERFORMING ADVANCED TASKS
3. Enter the following information for each port forwarding rule you create:
Port Forwarding Rules
Enabled
Select the check box to enable the port forwarding rule. Clear
the check box to disable.
Application Name
From the drop-down list, select the application whose data you
want to forward to the client on your local network. Click the
double arrows to populate the Name, Internal Port, External
Port and Protocol fields.
External Port Range
Enter the port(s) you want to forward from the WAN interface
(Internet). The port is automatically populated when you pick an
application from the drop-down list.
Protocol
Select the protocol that you wish to port forward. The options
are All, TCP, and UDP. The protocol will be automatically be
selected if you pick an application from the drop-down list.
IP Address
Can be manually entered or populated by your selection from
the Computer Name drop-down list.
Computer Name
Device on your local network to which the rule will be applied.
Click the double arrows to populate the IP Address field.
Internal Port Range
Enter the port(s) on the LAN client to which you want to forward
data. The port is automatically populated when you pick an
application from the drop-down list.
4. Click Save at the top or bottom of the page.
MY NET N900 CENTRAL
USER MANUAL
75
PERFORMING ADVANCED TASKS
Accessing My Net View (Windows)
Once you install My Net View on your computer, you can use it to diagnose network
problems.
To access My Net View:
1. Double-click the My Net View icon
page displays.
on your Desktop. The My Net View Welcome
2. Click Diagnose, and use the online Help (?) to guide you through the diagnostic
procedures.
MY NET N900 CENTRAL
USER MANUAL
76
INSTALLING AND USING WD PRINT SHARE
4
3
1
7
5
Installing and Using WD Print Share
Your My Net N900 Central router can share a printer, a multi-function printer, or a scanner
with computers on your network.
This chapter contains the following topics:
Installing WD Print Share (Windows)
Installing WD Print Share (Mac)
Using the WD Print Share Control Center
Installing WD Print Share (Windows)
Before installing WD Print Share software, make sure the manufacturerвЂ™s printer/scanner
driver and software are installed in your computer.
1. Connect the USB printer/scanner to the USB port on the back of your router.
2. Insert the Setup & Resource CD into your computerвЂ™s CD drive. If the setup screen
doesnвЂ™t start automatically, open the CD and double-click EasySetup.exe.
3. If you have already set up your router, click Skip and go to software installation.
4. Select WD Print Share and click Install to start installation.
5. When the installation is done, click the WD Print Share icon on the desktop to display
the Print Share Control Center.
MY NET N900 CENTRAL
USER MANUAL
77
INSTALLING AND USING WD PRINT SHARE
Installing WD Print Share (Mac)
Before installing WD Print Share software, make sure the manufacturerвЂ™s printer/scanner
driver and software are installed in your computer.
1. If you have not already done so, use My Net Setup on the Setup CD to install WD
Printshare Installer on a Mac computer (see вЂњMy Netв„ў Setup (Mac)вЂќ on page 19).
2. In Finder, double-click WD Print Share under Devices:
3. Follow the installation wizard to install WD Print Share.
4. When the installation is done, click the WD Print Share icon on the desktop to display
the WD Print Share Control Center.
MY NET N900 CENTRAL
USER MANUAL
78
INSTALLING AND USING WD PRINT SHARE
Using the WD Print Share Control Center
Opening the WD Print Share Control Center
1. Double click the WD Print Share icon on the desktop or in the system tray to display
the WD Print Share Control Center.
2. Make sure the status is Auto-Connected or Connected. You are now ready to print.
Note: When you exit and log out of WD Print Share, the icon in the system tray
disappears, and you can no longer print using the USB port on router. But
the icon on the desktop is still there, and you can activate it again by
double-clicking it. Just exiting the WD Print Share does not log out the
print server; it still resides in the system tray ready for printing.
Using an Auto-Connected Printer
By default, the printer is in Auto-Connected mode, which allows the computer to be
connected to the printer only when sending a print job to the printer. Another user in the
network can use the printer while you are disconnected.
Using the Connect Button
Connected mode is for both printing and scanning. Selecting the printer or scanner and
clicking Connect manually connects the device to your computer for the timeout duration
set in Tool > Set Timeout in the menu.
Note: Only the connected computer will be able to print until the computer
releases the connection.
MY NET N900 CENTRAL
USER MANUAL
79
INSTALLING AND USING WD PRINT SHARE
Using the Connect Button With a Scanner
1.
2.
3.
4.
Select the scanner from the list on the WD Print Share Control Center.
Click Connect. The status changes to Connected.
Launch the software that came with your scanner.
After the scanning job is done, disconnect by clicking Disconnect or let the scanner
disconnect automatically in the predefined time set in Tool > Set Timeout in the menu.
Using the Scan Button
You can also use the Scan button on the WD Print Share Control Center to activate
scanning with the industry standard TWAIN or WIA interface.
1. Select the scanner from the list on the WD Print Share Control Center.
2. Click Scan. You are prompted to select a scanner interface. A scanner user interface
appears on the screen.
3. Choose options and click Scan to scan your picture or document.
4. After scanning is done, click Close.
MY NET N900 CENTRAL
USER MANUAL
80
TROUBLESHOOTING
8
Troubleshooting
Problem
Solution
The power LED does not illuminate.
Ensure that the power cord is correctly connected to
the router.
Ensure that the electrical outlet is working properly. To
do this, plug a different electronic device into the
outlet and try to power it on.
Ensure that you are using the AC adapter provided
with the router.
A port number LED does not illuminate.
Ensure that the connected device is powered on.
Ensure that the Ethernet cable(s) are securely
connected to the ports on both the device and the
router.
To ensure that the cable between the router and the
electronic device is working properly, replace it with
another cable.
Computers are unable to access the
Internet.
Ensure that the router is powered on. The power LED
should be solid and not flashing.
Check the cable connections between the modem,
router and computer. The Ethernet cable connected
to your modem should be connected to the Internet
port on the router. An Ethernet cable from your
computer should be connected to a LAN port on the
back of the router.
Power off and power on your modem, router, and
computer.
If all else fails, install My Net View from the product
CD or contact Technical Support at
http://support.wdc.com or your ISP.
All front panel LEDs (except the internal
storage LED) flash continuously.
G
Relocate your router to a place that has good
ventilation.
Turn off your router, and set it aside for 15 to 20
minutes until it cools down. Turn your router back on
to resume operation.
If the problem persists, contact Technical Support at
http://support.wdc.com.
MY NET N900 CENTRAL
USER MANUAL
81
REGULATORY AND WARRANTY INFORMATION
9
Regulatory and Warranty Information
This chapter contains the following topics:
Regulatory Compliance
Warranty Information (All Regions Except Australia/New Zealand)
Warranty Information (Australia/New Zealand only)
GNU General Public License (вЂњGPLвЂќ)
Regulatory Compliance
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Regulatory Information/Disclaimers
Installation and use of this Wireless LAN device must be in strict accordance with the
instructions included in the user documentation provided with the product. Any changes or
modifications (including the antennas) made to this device that are not expressly approved
by the manufacturer may void the userвЂ™s authority to operate the equipment. The
manufacturer is not responsible for any radio or television interference caused by
unauthorized modification of this device, or the substitution of the connecting cables and
equipment other than manufacturer specified. It is the responsibility of the user to correct
any interference caused by such unauthorized modification, substitution or attachment.
Manufacturer and its authorized resellers or distributors will assume no liability for any
damage or violation of government regulations arising from failing to comply with these
guidelines.
For operation within 5.15 ~ 5.25 GHz frequency range, it is restricted to indoor environment.
This device meets all the other requirements specified in Part 15E, Section 15.407 of the
FCC Rules.
MY NET N900 CENTRAL
USER MANUAL
82
REGULATORY AND WARRANTY INFORMATION
CAUTION: To comply with FCC RF exposure compliance requirements, the antenna used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and
must not be co-located or operating in conjunction with any other antenna or transmitter.
Note: The country code selection is for non-US models only and is not available
for all US models. Per FCC regulations, all WiFi products marketed in the
US must be fixed to US operation channels only.
Industry Canada (IC)
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Ce dispositif est conforme Г la norme CNR-210 d'Industrie Canada applicable aux appareils
radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le
dispositif ne doit pas produire de brouillage prГ©judiciable, et (2) ce dispositif doit accepter
tout brouillage reГ§u, y compris un brouillage susceptible de provoquer un fonctionnement
indГ©sirable.
CAUTION! The device for operation in the band 5150-5250 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite systems.
AVERTISSEMENT! Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont
rГ©servГ©s uniquement pour une utilisation Г lвЂ™intГ©rieur afin de rГ©duire les risques de brouillage
prГ©judiciable aux systГЁmes de satellites mobiles utilisant les mГЄmes canaux.
Radiation Exposure Statement: This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20 cm between the radiator and your body.
DГ©claration d'exposition aux radiations: Cet Г©quipement est conforme aux limites
d'exposition aux rayonnements IC Г©tablies pour un environnement non contrГґlГ©. Cet
Г©quipement doit ГЄtre installГ© et utilisГ© avec un minimum de 20 cm de distance entre la
source de rayonnement et votre corps.
ICES-003/NMB-003 Statement
Cet appareil numГ©rique de la classe B est conforme Г la norme ICES-003 du Canada.
This device complies with Canadian ICES-003 Class B.
This product is intended to be supplied by a listed limited power source, double insulated, or
direct plug-in power unit marked вЂњClass 2.вЂќ
Safety Compliance
Approved for US and Canada. CAN/CSA-C22.2 No. 60950-1, UL 60950-1: Safety of
Information Technology Equipment.
ApprouvГ© pour les Etats-Unis et le Canada. CAN/CSA-C22.2 No. 60950-1, UL 60950-1:
SГ»retГ© d'Г©quipement de technologie de l'information.
This device is only for use with the compatible UL Listed AC adapter.
Cet appareil n'est destinГ© qu'a` des adaptateur compatibles marquГ©s "UL Listed".
MY NET N900 CENTRAL
USER MANUAL
83
REGULATORY AND WARRANTY INFORMATION
д»Ґдё‹и¦иЄћйЃ©з”ЁеЏ°зЃЈењ°еЌЂ
з¶“ећ‹ејЏиЄЌи‰еђ€ж јд№‹дЅЋеЉџзЋ‡е°„й »й›»ж©џпјЊйќћз¶“иЁ±еЏЇпјЊе…¬еЏёгЂЃе•†и™џж€–дЅїз”ЁиЂ…еќ‡дёЌеѕ—ж“…и‡Єи®Љж›ґй »зЋ‡гЂЃ
еЉ е¤§еЉџзЋ‡ж€–и®Љж›ґеЋџиЁиЁ€д№‹з‰№жЂ§еЏЉеЉџиѓЅгЂ‚
дЅЋеЉџзЋ‡е°„й »й›»ж©џд№‹дЅїз”ЁдёЌеѕ—еЅ±йџїйЈ›и€Єе®‰е…ЁеЏЉе№Іж“ѕеђ€жі•йЂљдїЎпј›з¶“з™јзЏѕжњ‰е№Іж“ѕзЏѕи±Ўж™‚пјЊж‡‰з«‹еЌі
еЃњз”ЁпјЊдё¦ж”№е–„и‡із„Ўе№Іж“ѕж™‚ж–№еѕ—з№јзєЊдЅїз”ЁгЂ‚е‰Ќй …еђ€жі•йЂљдїЎпјЊжЊ‡дѕќй›»дїЎжі•и¦Џе®љдЅњжҐд№‹з„Ўз·љй›»йЂљ
дїЎгЂ‚дЅЋеЉџзЋ‡е°„й »й›»ж©џй €еїЌеЏ—еђ€жі•йЂљдїЎж€–е·ҐжҐгЂЃз§‘еёеЏЉй†«з™‚з”Ёй›»жіўиј»е°„жЂ§й›»ж©џиЁе‚™д№‹е№Іж“ѕгЂ‚
For Mexico Only
La operaciГіn de este equipo estГЎ sujeta a las siguientes dos condiciones: (1) es posible que
este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo
debe aceptar cualquier interferencia, incluyendo la que pueda causar su operaciГіn no
deseada.
For Russia FAC DoC Only
РџРѕРґС‚РІРµСЂР¶РґРµРЅРёРµ СЃРѕРѕС‚РІРµС‚СЃС‚РІРёСЏ РњРёРЅРєРѕРјСЃРІСЏР·Рё Р РѕСЃСЃРёРё:
Р”РµРєР»Р°СЂР°С†РёСЏ СЃРѕРѕС‚РІРµС‚СЃС‚РІРёСЏ в„– Р”-Р Р”-1927 РѕС‚ 24.05.2012 РіРѕРґР°, РґРµР№СЃС‚РІРёС‚РµР»СЊРЅР° РґРѕ
24.05.2018 РіРѕРґР°, Р·Р°СЂРµРіРёСЃС‚СЂРёСЂРѕРІР°РЅР° РІ Р¤РµРґРµСЂР°Р»СЊРЅРѕРј Р°РіРµРЅС‚СЃС‚РІРµ СЃРІСЏР·Рё 09.06.2012
РіРѕРґР°.
For Brazil Only
Este equipamento opera em carГЎter secundГЎrio, isto Г©, nГЈo tem direito a proteГ§ГЈo contra
interferГЄncia prejudicial, mesmo de estaГ§Гµes do mesmo tipo, e nГЈo causar interferГЄncia a
sistema operando em carГЎter primГЎrio.
CE Compliance for Europe
Operation of this device is subjected to the following National regulations and may be
prohibited to use if certain restriction should be applied.
Marking by the CE symbol indicates compliance of this system to the applicable Council
Directives of the European Union, including the EMC Directives (2004/108/EC), (1999/5/EC),
the Low Voltage Directive (2006/95/EC), and EuP Directive (2005/32/EC). A вЂњDeclaration of
ConformityвЂќ in accordance with the applicable directives has been made and is on file at
Western Digital Europe.
Die Kennzeichnung mit dem CE-Symbol zeigt an, dass dieses System die anwendbaren
Richtlinien der EuropГ¤ischen Union erfГјllt, einschlieГџlich der EMV-Richtlinien (2004/108/EG),
(1999/5/EG), der Niederspannungsrichtlinie (2006/95/EG) und der Richtlinie (2005/32/EG) des
EuropГ¤ischen Parlaments. Eine вЂћKonformitГ¤tserklГ¤rungвЂњ gemГ¤Гџ den anwendbaren Richtlinien
wurde abgegeben und kann bei Western Digital Europe eingesehen werden.
Le symbole CE sur l'appareil indique la conformitГ© de cet appareil avec les directives
applicables du Conseil de l'Union EuropГ©enne, dont les directives EMC (2004/108/EC),
(1999/5/EC), la directive sur les limites de tension (2006/95/EC) et la directive EuP (2005/32/
EC), si applicable. Une В« dГ©claration de conformitГ© В» conforme aux directives applicables a
Г©tГ© effectuГ©e et est consultable chez Western Digital Europe.
Il marchio CE indica la conformitГ del sistema alle direttive applicabili del Consiglio
dell'Unione europea, tra cui le Direttive EMC (2004/108/CE), (1999/5/CE), la Direttiva Bassa
MY NET N900 CENTRAL
USER MANUAL
84
REGULATORY AND WARRANTY INFORMATION
Tensione (2006/95/CE ), e la Direttiva EuP (2005/32/CE). Una вЂњDichiarazione di conformitГ вЂќ
redatta in base alle direttive vigenti ГЁ disponibile presso Western Digital Europe.
La marca con el sГmbolo CE indica el cumplimiento de este sistema de las Directivas del
Consejo de la UniГіn Europea correspondientes, incluidas las directivas EMC (2004/108/EC)
y (1999/5/EC), la Directiva de bajo voltaje (2006/95/CE) y la Directiva EuP (2005/32/EC). Se
ha realizado una "DeclaraciГіn de conformidad" de acuerdo con las directivas aplicables y se
encuentra archivada en Western Digital Europe.
CE-mГ¤rkningen innebГ¤r att detta system uppfyller Europeiska Unionens tillГ¤mpliga
rГҐdsdirektiv, inklusive EMC-direktivet (2004/108/EC), (1999/5/EC), lГҐgspГ¤nningsdirektivet
(2006/95/EC) och EuP-direktivet (2005/32/EC). En "Konformitetsdeklaration" i enlighet med
gГ¤llande direktiv har gjorts och finns arkiverad hos Western Digital Europe.
Merking med CE-symbolet indikerer at dette systemet samsvarer med gjeldende direktiver
(council directives) for EU, inkludert EMC-direktiv (2004/108/EF), (1999/5/EF),
Lavspenningsdirektiv (2006/95/EF) og EuP-direktiv (2005/32/EF). En "SamsvarserklГ¦ring"
i henhold til gjeldende direktiver har blitt opprettet og er i Western Digital Europas arkiver.
CE-merkintГ¤ osoittaa tГ¤mГ¤n jГ¤rjestelmГ¤n yhdenmukaisuuden sovellettavissa olevien
Euroopan yhteisГ¶n neuvoston direktiivien kanssa, mukaan lukien EMC-direktiivi
(2004/108/EC), (1999/5/EC), alijГ¤nnitedirektiivi (2006/95/EC) sekГ¤ EuP-direktiivi
(2005/32/EC). "Noudattamisjulistus" on jГ¤tetty asiaankuuluvien direktiivien mukaisesti, ja se
on tallessa Western Digital Europessa.
MГ¦rkning med CE-symbolet angiver at systemet overholder Europaparlamentets og RГҐdets
direktiver, herunder EMC-direktiverne (elektromagnetisk kompatibilitet) (2004/108/EC), (1999/
5/EC) og lavspГ¦ndingsdirektivet (2006/95/EC) og EuP-direktivet 2005/32/EC. En вЂњDeclaration
of ConformityвЂќ (overensstemmelsesattestering) i henhold til gГ¦ldende direktiver er afgivet og
opbevares hos Western Digital Europe.
РњР°СЂРєРёСЂРѕРІРєР° СЃРёРјРІРѕР»РѕРј CE СЃРІРёРґРµС‚РµР»СЊСЃС‚РІСѓРµС‚ Рѕ СЃРѕРѕС‚РІРµС‚СЃС‚РІРёРё РЅР°СЃС‚РѕСЏС‰РµР№ СЃРёСЃС‚РµРјС‹
РїРѕР»РѕР¶РµРЅРёСЏРј РїСЂРёРјРµРЅРёРјС‹С… РґРёСЂРµРєС‚РёРІ РЎРѕРІРµС‚Р° Р•РІСЂРѕРїРµР№СЃРєРѕРіРѕ РЎРѕСЋР·Р°, РІ С‚РѕРј С‡РёСЃР»Рµ
РґРёСЂРµРєС‚РёРІ РѕР± СЌР»РµРєС‚СЂРѕРјР°РіРЅРёС‚РЅРѕР№ СЃРѕРІРјРµСЃС‚РёРјРѕСЃС‚Рё (2004/108/EC, 1999/5/EC), РґРёСЂРµРєС‚РёРІС‹
Рѕ РЅРёР·РєРѕРІРѕР»СЊС‚РЅРѕРј РѕР±РѕСЂСѓРґРѕРІР°РЅРёРё (2006/95/EC) Рё РґРёСЂРµРєС‚РёРІС‹ РѕР± СѓСЃС‚СЂРѕР№СЃС‚РІР°С…,
РёСЃРїРѕР»СЊР·СѓСЋС‰РёС… СЌР»РµРєС‚СЂРѕСЌРЅРµСЂРіРёСЋ (2005/32/EC). Р—Р°СЏРІР»РµРЅРёРµ Рѕ СЃРѕРѕС‚РІРµС‚СЃС‚РІРёРё
РїРѕР»РѕР¶РµРЅРёСЏРј РїСЂРёРјРµРЅРёРјС‹С… РґРёСЂРµРєС‚РёРІ, СЃРґРµР»Р°РЅРЅРѕРµ РєРѕРјРїР°РЅРёРµР№ Western Digital,
РЅР°С…РѕРґРёС‚СЃСЏ РІ Р°СЂС…РёРІРµ РµС‘ РµРІСЂРѕРїРµР№СЃРєРѕРіРѕ РїРѕРґСЂР°Р·РґРµР»РµРЅРёСЏ.
О— ПѓО®ОјО±ОЅПѓО· ОјОµ П„Ої ПѓПЌОјОІОїО»Ої CE П…ПЂОїОґОµО№ОєОЅПЌОµО№ ПЊП„О№ П„Ої ПѓПЌПѓП„О·ОјО± О±П…П„ПЊ ПѓП…ОјОјОїПЃП†ПЋОЅОµП„О±О№ ОјОµ П„О№П‚
О№ПѓП‡ПЌОїП…ПѓОµП‚ ОїОґО·ОіОЇОµП‚ П„ОїП… ОЈП…ОјОІОїП…О»ОЇОїП… П„О·П‚ О•П…ПЃП‰ПЂО±ПЉОєО®П‚ О€ОЅП‰ПѓО·П‚, ПѓП…ОјПЂОµПЃО№О»О±ОјОІО±ОЅОїОјООЅП‰ОЅ
П„П‰ОЅ ОїОґО·ОіО№ПЋОЅ ПЂОµПЃОЇ О·О»ОµОєП„ПЃОїОјО±ОіОЅО·П„О№ОєО®П‚ ПѓП…ОјОІО±П„ПЊП„О·П„О±П‚ (2004/108/О•Ољ), (1999/5/О•Ољ), П„О·П‚
ОїОґО·ОіОЇО±П‚ ПЂОµПЃОЇ П‡О±ОјО·О»О®П‚ П„О¬ПѓО·П‚ (2006/95/О•Ољ) ОєО±О№ П„О·П‚ ОїОґО·ОіОЇО±П‚ П„ОїП… О•П…ПЃП‰ПЂО±ПЉОєОїПЌ
ОљОїО№ОЅОїОІОїП…О»ОЇОїП… (2005/32/О•Ољ). О€П‡ОµО№ ПЂПЃО±ОіОјО±П„ОїПЂОїО№О·ОёОµОЇ ОјОЇО± В«О”О®О»П‰ПѓО· ПѓП…ОјОјПЊПЃП†П‰ПѓО·П‚В»,
ПѓПЌОјП†П‰ОЅО± ОјОµ П„О№П‚ О№ПѓП‡ПЌОїП…ПѓОµП‚ ОїОґО·ОіОЇОµП‚ ОєО±О№ П„О·ПЃОµОЇП„О±О№ ПѓП„О± О±ПЃП‡ОµОЇО± П„О·П‚ Western Digital О•П…ПЃПЋПЂО·П‚.
MY NET N900 CENTRAL
USER MANUAL
85
REGULATORY AND WARRANTY INFORMATION
Environmental Compliance (China)
С»аЄ•РЃбіќв†¦біќб†‡в Ѕд‹јбџЄвЂ«Ь—вЂ¬г‹ґв±�а§Ўвї„а¦ћа§їдћЈ
дљјУЉа§Ўвї„
бґЋа»‡бґЋг†…
в¬‰дЏѓбµ“г’�а§њбµ“а¤µ
в¬‰в‘¤а¦¬аҐџа°јв¬‰в‘¤ХЇб‘Ёа°ј
в№ЂвІё
біќв†¦біќб†‡в Ѕд‹јбџЄвЂ«Ь—вЂ¬г‹ґ
дЄ™
в€І
д¬ќ
ЭЃУ‹д«Ђ
;
;
;
;
2
2
2
2
2
2
2
2
2
2
2
2
а»®в’€г�ЁгЈѓ а»®в’€С гЈѓдќ®
2
2
2
2
2
2
2
2
2Т·гёјв„ёвѕЎдљјУЉв±�б ”біќаґ›д‹јбґ¤бРЃб ”а§їв±�д†№вѕЎбіќв†¦біќб†‡в Ѕд‹јаґ›ФўСўРЃа¤ўТЋв‡ҐЭ…а© аі‘Цµб™ѓС»П®дљјб ”д№•бЏ—в±�З‰в¬‰б„¤
Цµб™ѓС»аЄ•РЃбіќв†¦біќб†‡в Ѕд‹јв±�д°¤дћЈгЅ•в€–ЗЉ6-7гѕ�б…®в±�д°¤дћЈЗ„
;Т·гёјв„ёвѕЎдљјУЉб ”в«јв±�аґ›д‹јбґ¤бРЃгџ‡б‡ҐбіќП”г‰Џбґ¤бЭЉб ”а§їв±�біќв†¦біќб†‡в Ѕд‹је‚¬СўРЃа¤ўТЋв‡ҐЭ…а© аі‘Цµб™ѓС»П®дљјб ”
д№•бЏ—в±�З‰в¬‰б„¤Цµб™ѓС»аЄ•РЃбіќв†¦біќб†‡в Ѕд‹јв±�д°¤дћЈгЅ•в€–ЗЉ6-7гѕ�б…®в±�д°¤дћЈ
д°ёдґІС»аЄ•Пћа¦єбіќб·›д†„Л€б ”біќвЂ«Э™вЂ¬д°�С»аЄ•а¦ћЭЉдљјУЉв±�Гѕв¦ѓЦ±Х“в«јбіід°¤Гїаґ›в¬…в„ёб°’вјЋв±�гѓєа§‹гёјвјЋЗ„в„ё
в¦ѓЦ±Х“в«јбіід°¤а¦ѕд—–в«јСўС»аЄ•б џвЂ«Э вЂ¬РЃб ”гѕ�б…®в±�Х“в«јбґµУЉЗ„
аіјв„ёгёјРЃЛ€У•П®а§ѓг›‘ді”гЅ•бёЌбҐ‚б…Ід°™бљ™вЂ«Ю‰вЂ¬б‡Ќб·›д†„ДЃ;ДЃв±�д№Ќві‚д–Їгё д–ЇП”в„№в±�бЎ”бґѓб—»гѕ·дћћЗ„
Warranty Information (All Regions Except Australia/New Zealand)
Limited Warranty
WD warrants that the Product, in the course of its normal use, will for the term defined below, be free from
defects in material and workmanship and will conform to WDвЂ™s specification therefor. The term of your limited
warranty depends on the country in which your Product was purchased. The term of your limited warranty is for
2 year in the North, South and Central America region, 2 years in the Europe, the Middle East and Africa region,
and 3 years in the Asia Pacific region, unless otherwise required by law. The term of your limited warranty period
shall commence on the purchase date appearing on your purchase receipt. WD may at its discretion make
extended warranties available for purchase. WD shall have no liability for any Product returned if WD determines
that the Product was stolen from WD or that the asserted defect a) is not present, b) cannot reasonably be
rectified because of damage occurring before WD receives the Product, or c) is attributable to misuse, improper
installation, alteration (including removing or obliterating labels and opening or removing external enclosures,
unless the product is on the list of limited user-serviceable products and the specific alteration is within the scope
of the applicable instructions, as found at http://support.wdc.com), accident or mishandling while in the
possession of someone other than WD. Subject to the limitations specified above, your sole and exclusive
warranty shall be, during the period of warranty specified above and at WDвЂ™s option, the repair or replacement of
the Product with an equivalent or better Product. The foregoing warranty of WD shall extend to repaired or
replaced Products for the balance of the applicable period of the original warranty or ninety (90) days from the
date of shipment of a repaired or replaced Product, whichever is longer.
The foregoing limited warranty is WDвЂ™s sole warranty and is applicable only to products sold as new. The
remedies provided herein are in lieu of a) any and all other remedies and warranties, whether expressed, implied
or statutory, including but not limited to, any implied warranty of merchantability or fitness for a particular
purpose, and b) any and all obligations and liabilities of WD for damages including, but not limited to accidental,
consequential, or special damages, or any financial loss, lost profits or expenses, or lost data arising out of or in
connection with the purchase, use, or performance of the Product, even if WD has been advised of the possibility
of such damages. In the United States, some states do not allow exclusion or limitations of incidental or
consequential damages, so the limitations above may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
Obtaining Service
WD values your business and always attempts to provide you the very best of service. If this Product requires
maintenance, either contact the dealer from whom you originally purchased the Product or visit our product
support Web site at http://support.wdc.com for information on how to obtain service or a Return Material
Authorization (RMA). If it is determined that the Product may be defective, you will be given an RMA number and
instructions for Product return. An unauthorized return (i.e., one for which an RMA number has not been issued)
will be returned to you at your expense. Authorized returns must be shipped in an approved shipping container,
prepaid and insured, to the address provided on your return paperwork. Your original box and packaging
materials should be kept for storing or shipping your WD product. To conclusively establish the period of
warranty, check the warranty expiration (serial number required) via http://support.wdc.com. WD shall have no
liability for lost data regardless of the cause, recovery of lost data, or data contained in any Product placed in its
possession.
MY NET N900 CENTRAL
USER MANUAL
86
REGULATORY AND WARRANTY INFORMATION
Warranty Information (Australia/New Zealand only)
For consumers purchasing products in Australia and New Zealand, please refer to this
warranty information.
Nothing in this warranty modifies or excludes your legal rights under the Australian Competition and Consumer
Act or the New Zealand Consumer Guarantees Act. This warranty identifies WD's preferred approach to
resolving warranty claims which is likely to be quick and simple for all parties.
No other warranties either express or implied by law, including but not limited to those contained in the Sale of
Goods Act, are made with respect to the Product. If you purchased your Product in New Zealand for the
purposes of a business, you acknowledge and agree that the New Zealand Consumer Guarantees Act does not
apply.
In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if goods fail to be of acceptable
quality and the failure does not amount to a major failure. What constitutes a major failure is set out in the
Australian Consumer Law.
Warranty
WD warrants that the Product, in the course of its normal use, will for the term defined below, be free from
defects in material and workmanship and will conform to WDвЂ™s specifications. The term of your warranty is
3 years in Australia and New Zealand, unless otherwise required by law. The term of your warranty period shall
commence on the purchase date appearing on your purchase receipt from an authorized distributor or
authorized reseller. Proof of purchase shall be required to be eligible for this warranty and to establish the
commencement date of this warranty. Warranty service will not be provided unless the Product is returned to an
authorized distributor, authorized reseller or regional WD return center where the Product was first shipped by
WD. WD may at its discretion make extended warranties available for purchase. WD shall have no liability for any
Product returned if WD determines that the Product was (i) not purchased from an authorized distributor or
authorized reseller, (ii) not used in accordance with WD specifications and instructions, (iii) not used for its
intended function, or (iv) stolen from WD, or that the asserted defect a) is not present, b) cannot reasonably be
rectified because of damage occurring before WD receives the Product, or c) is attributable to misuse, improper
installation, alteration (including removing or obliterating labels and opening or removing external enclosures,
including the mounting frame, unless the product is on the list of limited user-serviceable products and the
specific alteration is within the scope of the applicable instructions, as found at http://support.wdc.com),
accident or mishandling while in the possession of someone other than WD.
PRODUCTS ARE COMPLEX AND FRAGILE ITEMS THAT MAY OCCASSIONALY FAIL DUE TO (A)
EXTERNAL CAUSES, INCLUDING WITHOUT LIMITATION, MISHANDLING, EXPOSURE TO HEAT,
COLD, AND HUMIDITY, AND POWER FAILURES, OR (B) INTERNAL FAULTS. SUCH FAILURES CAN
RESULT IN THE LOSS, CORRUPTION, DELETION OR ALTERATION OF DATA. NOTE THAT YOU SHALL
BE RESPONSIBLE FOR THE LOSS, CORRUPTION, DELETION OR ALTERATION OF DATA
HOWSOEVER CAUSED, AND FOR BACKING UP AND PROTECTING DATA AGAINST LOSS,
CORRUPTION, DELETION OR ALTERATION. YOU AGREE TO CONTINUALLY BACK UP ALL DATA ON
THE PRODUCT, AND TO COMPLETE A BACKUP PRIOR TO SEEKING ANY GENERAL SERVICE AND
TECHNICAL SUPPORT FROM WD.
In Australia, if the Product is not of a kind ordinarily acquired for personal, domestic or household use or
consumption, provided it is fair and reasonable to do so, WD limits its liability to replacement of the Product or
supply of equivalent or better Product.
This warranty shall extend to repaired or replaced Products for the balance of the applicable period of the original
warranty or ninety (90) days from the date of shipment of a repaired or replaced Product, whichever is longer.
This warranty is WDвЂ™s sole manufacturer's warranty and is applicable only to Products sold as new.
Obtaining Service
WD values your business and always attempts to provide you the very best of service. Should you encounter any
problem, please give us an opportunity to address it before returning this Product. Most technical support
questions can be answered through our knowledge base or e-mail support service at http://support.wdc.com. If
the answer is not available or, if you prefer, please contact WD at the applicable telephone number shown in the
front of this document.
If you wish to make a claim, you should initially contact the dealer from whom you originally purchased the
Product. If you are unable to contact the dealer from whom you originally purchased the Product, please visit our
product support Web site at http://support.wdc.com for information on how to obtain service or a Return
Material Authorization (RMA). If it is determined that the Product may be defective, you will be given an RMA
number and instructions for Product return. An unauthorized return (i.e., one for which an RMA number has not
been issued) will be returned to you at your expense. Authorized returns must be shipped in an approved
shipping container, prepaid and insured, to the address provided with your RMA number. If following receipt of a
qualifying claim under this warranty, WD or the dealer from whom you originally purchased the Product
determines that your claim is valid, WD or such dealer shall, at its discretion, either repair or replace the Product
with an equivalent or better Product or refund the cost of the Product to you. You are responsible for any
expenses associated with a claim under this warranty. The benefits provided to you under this warranty are in
MY NET N900 CENTRAL
USER MANUAL
87
REGULATORY AND WARRANTY INFORMATION
addition to other rights and remedies available to you under the Australian Competition and Consumer Act or the
New Zealand Consumer Guarantees Act.
Your original box and packaging materials should be kept for storing or shipping your WD product. To
conclusively establish the period of warranty, check the warranty expiration (serial number required) via
http://support.wdc.com.
Western Digital Technologies, Inc.
3355 Michelson Drive, Suite 100
Phone: 949-672-7000
E-mail: support@wdc.com
GNU General Public License (вЂњGPLвЂќ)
Firmware incorporated into this product may include third party copyrighted software licensed under the GPL or
Lesser General Public License ("LGPL") (collectively, вЂњGPL SoftwareвЂќ) and not Western DigitalвЂ™s End User License
Agreement. In accordance with the GPL, if applicable: 1) the source code for the GPL Software may be
downloaded at no charge from http://support.wdc.com/download/gpl or obtained on CD for a nominal charge
from http://support.wdc.com/download/gpl or by calling Customer Support within three years of the date of
purchase; 2) you may re-use, re-distribute, and modify the GPL Software; 3) with respect solely to the GPL
Software, no warranty is provided, to the extent permitted by applicable law; and 4) a copy of the GPL is
included herewith, may be obtained at http://www.gnu.org, and may also be found at http://support.wdc.com/
download/gpl.
Modification of or tampering with the Software, including but not limited to any Open Source Software, is solely
at your own risk. Western Digital is not responsible for any such modification or tampering. Western Digital will
not support any product in which you have or have attempted to modify the Software supplied by
Western Digital.
MY NET N900 CENTRAL
USER MANUAL
88
APPENDIX: TECHNICAL SPECIFICATIONS
Appendix: Technical Specifications
Specification
Value
Ethernet
10/100/1000 Gigabit Ethernet
I/O ports
(4) Ethernet (RJ-45) ports
USB ports
(1) USB 2.0 port
Internal storage
2.5" HDD with SATA interface (1TB or 2TB)
Supported operating
systems
Windows XP with Service Pack 3
Windows Vista with Service Pack 2
Windows 7 with Service Pack 1
Mac OS X Leopard
Mac OS X Snow Leopard
Mac OS X Lion
Supported web
browsers
Internet Explorer 7 and later
Safari 2 and later
Firefox 2 and later
Chrome 7 and later
Physical dimensions
Length: 9.6" (244 mm)
Width: 6.7" (170 mm)
Height: 1.3" (32 mm)
Weight:
1 TB: 1.34 lb (0.61 Kg)
2 TB: 1.41 lb (0.64 Kg)
Power supply
Input voltage: 100V to 240V AC
Input frequency: 50 to 60 Hz
Output voltage: 12V DC, 3A
Power supply: 36W
Temperature
Operating temperature: 5 to 35 oC (41 to 95 oF)
Non-operating temperature: -20 to 65 oC (-4 to 149 oF)
MY NET N900 CENTRAL
USER MANUAL
89
INDEX
Index
DLNA 4, 28, 46
dual band speed 3
dynamic DNS 41
A
AC power adapters 6
access point, setting up 71
accessing files remotely 4
accessories 5
adding a wireless device 29
additional software available 4
administrator password 64
administrator settings 55
advanced settings chapter organization
36
advanced settings screens
accessing 36
components 37
advanced storage screens 46
advanced tasks 58
advanced WAN (Internet) screens 38
advanced wireless screens 38
attached storage, accessing files on 65
Easy Setup
installation software 3
using 9
environmental compliance (China)
Ethernet ports 3
external USB storage 27, 46
86
F
factory defaults, restoring 70
FasTrack Plus 3
firmware updates 56, 69
front panel 7
G
GPL software 88
guest access 4, 58
I
icons on dashboard 22
installing additional software 18
installing the router
using a browser 13
using Easy Setup (Windows only)
internal storage 4, 27, 65
Internet
connection 24
connection status 38
security 4
setup 39
IPv6 screens 41
B
back panel of router 7
basic wireless settings 26
bottom of router 8
box contents 5
button
Close 37
On/Off 14
Reset 8
WPS 7, 29
C
CD, getting started with 9
changing admin password 64
closing an advanced settings screen
connecting to the Internet 24
connectivity check 56
current settings 21
E
9
K
37
Kensington security slot
8
L
LEDs 7
logging out
56
D
M
dashboard icons 22
device and client tables 46
device mode 57
device not WPS enabled, connecting 29,
30
DHCP
server setup 72
settings 45
diagnosing network problems (Windows)
76
My Dashboard, current settings on 23
My Net Setup software for Mac computers
19
My Net View diagnostics (Windows)
5,
76
MY NET N900 CENTRAL
USER MANUAL
N
network diagnostics
4
90
INDEX
O
obtaining service (Australia and New Zealand) 87
obtaining service (except Australia and
New Zealand) 86
on-screen language, changing 57
operating precautions 1
P
package contents 5
parental controls 4, 59
port forwarding 52, 74
ports
Ethernet 3
USB 4
power adapters 6
problems 81
product
accessories 5
overview 3
recording information about
registration 2
safety information 1
warranty 86
push button setup 4
R
rebooting 70
recording product information 2
registering the router 2, 57
regulatory compliance 82
remote access
adding mobile access 31
adding web access 33
options 4
screens 50
setup 31
Reset button 8
restoring to factory defaults 70
RoHS 86
router
as an access point 71
back panel 7
components, views 6
Ethernet and USB ports 3
front panel 6
installation 10
LEDs 7
S
safety instructions
screens
MY NET N900 CENTRAL
USER MANUAL
1
2
Administrator 55
Advanced Wireless 38
AFP (Apple Filing Protocol) 47
ALG (Application Level Gateway) 53
Connection Check 56
Device and Client Tables 46
Device Mode 57
DHCP Server Settings 45
DMZ 49
Dynamic DNS 41
Enhanced WMM (My Net N900) 54
FasTrack Plus QoS 53
Firewall 48
Firmware Update 56
Guest Access 44
Host and LAN Settings 45
Internet Setup 39
Internet Status 38
IPv6 41
IPv6 Status 41
Language 57
Log 57
MAC Filter 49
Network UPnP 54
Parental Controls 49
Port Forwarding 52
Registration 57
Remote Access 50
Routing 53
Safely Remove 47
Storage 46
System 56
Time Settings 55
Wi-Fi Protected Setup (WPS) 44
Wireless Setup 42
security settings screens 48
service, all but Australia/New Zealand 86
service, Australia/New Zealand 87
settings
advanced 36
basic 21
current 21
storage 27
setup
CD 9
options 10
Windows Vista/Win7 9
Windows XP 9
wireless 14
software on the setup CD 18
software, GPL 88
91
INDEX
speed, wired and wireless 3
storage
attached USB drive 65
capacity 4
internal drive 65
settings 27
share types 46
system logs 57
system restore 56
T
tabs on advanced settings screens
tasks
advanced 58
basic 21
troubleshooting 81
37
U
updating firmware
UPnP 4, 74
USB port 3, 4
69
W
warranty, all but Australia/New Zealand
86
warranty, Australia/New Zealand 87
WD 2go 33
WD Print Share
description 4, 77
installing on a Mac computer 78
installing on a Windows computer 77
using 79
WD Quick View
accessing stored files 65
description 4
WD SmartWare 5
Wi-Fi Protected Security (WPS) 4
wireless
adding devices 29
settings 26
setup 14
WPS LED 7
WPS-enabled device, connecting 29
MY NET N900 CENTRAL
USER MANUAL
92
Information furnished by WD is believed to be accurate and reliable; however, no responsibility is assumed by WD for its
use nor for any infringement of patents or other rights of third parties which may result from its use. No license is
granted by implication or otherwise under any patent or patent rights of WD. WD reserves the right to change
specifications at any time without notice.
Western Digital, WD and the WD logo are registered trademarks in the U.S. and other countries; My Net is a registered
trademark of Western Digital Technologies, Inc. Adobe and Adobe Reader and the included Adobe Reader logo are
either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Other marks may be mentioned herein that belong to other companies.
В© 2012 Western Digital Technologies, Inc. All rights reserved.
Western Digital
3355 Michelson Drive, Suite 100
Irvine, California 92612 U.S.A.
4779-705074-A01 NOV 2012

My Net N900 Central Router User Manual - Western Digital

Related documents

Add this document to collection(s)

Add this document to saved

Suggest us how to improve flashcards