Report of the visit

Dellв„ў Vostroв„ў 1500 OwnerвЂ™s Manual
Model PP22L
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of
your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data
and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury,
or death.
____________________
Information in this document is subject to change without notice.
В© 2007 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly
forbidden.
Trademarks used in this text: Dell, the DELL logo, Vostro, Wi-Fi Catcher, and Dell MediaDirect are
trademarks of Dell Inc.; Intel is a registered trademark and Core is a trademark of Intel Corporation;
Microsoft, Windows, Outlook, Windows XP and Windows Vista are either trademarks or registered
trademarks of Microsoft Corporation in the United States and/or other countries; Bluetooth is a
registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license; ENERGY STAR
is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner,
Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and
trade names other than its own.
Model PP22L
November 2007
P/N TT979
Rev. A02
Contents
1
Finding Information
2
About Your Computer
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
Determining Your ComputerвЂ™s Configuration
Front View
21
. . . . . . . . . . . . . . . . . . . . . . . .
22
. . . . . . . . . . . . . . . . . . . . . .
27
. . . . . . . . . . . . . . . . . . . . .
30
. . . . . . . . . . . . . . . . . . . . . . . .
31
Right Side View
Bottom View
3
21
. . . . . .
Left Side View
Back View
15
. . . . . . . . . . . . . . . . . . . . . . .
Setting Up Your Computer .
Connecting to the Internet
. . . . . . . . . . .
37
. . . . . . . . . . . . . . .
37
Setting Up Your Internet Connection .
. . . . . . .
39
. . . . . . . . . . . . . .
39
Microsoft Windows Vistaв„ў
. . . . . . . . . . . .
43
. . . . . . . . . . . . . . . . . . .
43
. . . . . . . . . . . . . . . . . . . .
43
Setting Up a Printer
Printer Cable
38
. . . . .
Transferring Information to a New Computer
Microsoft Windows XP
34
Connecting a USB Printer
Power Protection Devices
. . . . . . . . . . . . .
44
. . . . . . . . . . . . . . .
45
Contents
3
Surge Protectors
. . . . . . . . . . . . . . . . . .
45
Line Conditioners
. . . . . . . . . . . . . . . . . .
46
Uninterruptible Power Supplies
4
. . . . . . . . . .
46
Using the Display
. . . . . . . . . . . . . . . . . .
47
Adjusting Brightness
. . . . . . . . . . . . . . . . . .
47
. . . . . . . . . . . . . . . . . . . .
47
Using a Projector
. . .
47
. . . . . . . . . . . . .
48
. . . . . . . . . . . . . . . . . .
48
Making Images and Text Look Bigger or Sharper
MicrosoftВ® WindowsВ® XP
Windows Vistaв„ў
. . .
49
. . . . . . . . . . . . . .
49
. . . . . . . . . . . . . . . . . . .
50
Using Both a Monitor and Your Computer Display
Microsoft Windows XP .
Windows Vista
. . . . .
50
. . . . . . . . . . . . . .
51
. . . . . . . . . . . . . . . . . . .
51
Setting Display Resolution and Refresh Rate .
Microsoft Windows XP .
Windows Vista
5
Using the Keyboard and Touch Pad
Numeric Keypad
. . . .
53
. . . . . . . . . . . . . . . . . . . . .
53
Key Combinations
. . . . . . . . . . . . . . . . . . . .
System Functions
. . . . . . . . . . . . . . . . . .
Display Functions .
Battery
54
. . . . . . . . . . . . . . . . . . . . . . .
54
. . . . . . . . . . . . . . . .
В®
В®
Microsoft Windows Logo Key Functions . . . .
54
Dellв„ў QuickSet Key Combinations
. . . . . . . . .
55
. . . . . . . . . . . .
55
Adjusting Keyboard Settings
Contents
54
. . . . . . . . . . . . . . . . .
Power Management
4
54
55
Touch Pad
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .
56
. . . . . . . . . . . . . . . . . . . .
59
Customizing the Touch Pad
6
Using a Battery
Battery Performance
. . . . . . . . . . . . . . . . . .
Checking the Battery Charge
. . . . . . . . . . . . . .
Dellв„ў QuickSet Battery Meter .
. . . . . . . . . .
MicrosoftВ® WindowsВ® Battery Meter .
Charge Gauge
59
60
60
. . . . . .
61
. . . . . . . . . . . . . . . . . . .
61
Low-Battery Warning
. . . . . . . . . . . . . . .
62
Conserving Battery Power
. . . . . . . . . . . . . . .
62
. . . . . . . . . . . . . .
63
. . . . . . . . . . . . .
63
. . . . . . . . . . . . . . . . . .
63
Power Management Modes
Standby and Sleep Mode
Hibernate Mode
Configuring Power Management Settings
. . . . . . .
64
Accessing Power Options Properties
. . . . . . .
64
Charging the Battery
. . . . . . . . . . . . . . . . . .
65
Replacing the Battery
. . . . . . . . . . . . . . . . . .
65
. . . . . . . . . . . . . . . . . . . .
66
Storing a Battery
7
55
Using Multimedia
Playing Media
. . . . . . . . . . . . . . . . . .
67
. . . . . . . . . . . . . . . . . . . . . .
67
Playing Media Using Dell Travel Remote .
. . . . . . .
69
Contents
5
Copying CD, DVD, and Blu-ray Discв„ў (BD) Media
How to Copy a CD, DVD, or BD
. . .
70
. . . . . . . . . . .
70
Using Blank CD, DVD, and BD Media
Helpful Tips
. . . . . . .
71
. . . . . . . . . . . . . . . . . . . . .
72
Adjusting the Volume
. . . . . . . . . . . . . . . . . .
73
Adjusting the Picture
. . . . . . . . . . . . . . . . . .
74
Using Dell MediaDirectв„ў
. . . . . . . . . . . . . . . .
Connecting Your Computer to a TV or
Audio Device . . . . . . . . . . . .
S-Video and Standard Audio
. . . . . . . . . .
75
. . . . . . . . . . . .
77
S-Video and S/PDIF Digital Audio
. . . . . . . . .
Composite Video and Standard Audio
. . . . . . .
Composite Video and S/PDIF Digital Audio
Component Video and Standard Audio
82
. . . . . .
84
87
. . . . . . .
90
. . . . . . . . . . . . . . . .
91
. . . . . . . . . . . . . . . . . . .
91
Using ExpressCards
Installing an ExpressCard
. . . . . . . . . . . . . . . .
Removing an ExpressCard or Blank .
9
93
95
. . . . . . . . . . . . . . . . . .
95
. . . . . . . . . . . . . . . .
Removing a Memory Card or Blank
Contents
92
. . . . . . .
Installing a Memory Card
6
. . . . . . . . . .
Using the Memory Card Reader
Memory Card Blanks
80
. . . .
Enabling the Display Settings for a TV
ExpressCard Blanks
78
. . . .
Component Video and S/PDIF Digital Audio
8
74
. . . . . . . . . . .
95
96
10 Setting Up and Using Networks
. . . . . . .
97
. . . . . . . . .
97
. . . . . . . . . . . . . . . . . .
98
. . . . . . . . . . . . . . . . . . . .
98
Connecting a Network or Broadband
Modem Cable . . . . . . . . . . . . .
Setting Up a Network
Windows XP
Windows Vista
. . . . . . . . . . . . . . . . . . .
Wireless Local Area Network
. . . . . . . . . . . . .
What You Need to Establish a WLAN
Connection . . . . . . . . . . . . . .
Checking Your Wireless Network Card
99
. . . . . . .
99
. . . . . .
99
Setting Up a New WLAN Using a Wireless
Router and a Broadband Modem . . . . .
Connecting to a WLAN .
98
. . . .
100
. . . . . . . . . . . . . .
101
Mobile Broadband (or Wireless Wide
Area Network) . . . . . . . . . . . . .
. . . . . . . . .
What You Need to Establish a Mobile
Broadband Network Connection . .
. . . . . . .
104
104
Checking Your Dell Mobile Broadband Card .
. . .
105
Connecting to a Mobile Broadband Network
. . .
105
. . . . . . . .
106
. . . . . . . . .
107
Enabling/Disabling the Dell Mobile
Broadband Card . . . . . . . . . .
Dell Wi-Fi Catcherв„ў Network Locator
11 Securing Your Computer
Security Cable Lock
Passwords .
. . . . . . . . . . . .
109
. . . . . . . . . . . . . . . . . . .
109
. . . . . . . . . . . . . . . . . . . . . . .
109
If Your Computer Is Lost or Stolen
. . . . . . . . . . .
110
Contents
7
12 Troubleshooting .
. . . . . . . . . . . . . . . . . .
Dell Technical Update Service
Dell Diagnostics
. . . . . . . . . . . . .
113
. . . . . . . . . . . . . . . . . . . . .
113
Dell Support Center
Dell Support
. . . . . . . . . . . . . . . . . . .
118
. . . . . . . . . . . . . . . . . . . .
118
Dell PC TuneUp
. . . . . . . . . . . . . . . . . . .
Dell PC Checkup
. . . . . . . . . . . . . . . . . .
Dell Network Assistant
120
120
. . . . . . . . . . . . . . . . . . . . .
121
Hard drive problems
. . . . . . . . . . . . . . .
121
. . . . . . . . . . . . . . . .
122
E-Mail, Modem, and Internet Problems .
. . . . . . . .
123
. . . . . . . . . . . . . . . . . . . . .
125
ExpressCard Problems
. . . . . . . . . . . . . . . . .
Keyboard Problems
131
. . . . . . . . . . . . . . . . . . .
131
. . . . . . . . . . . .
131
. . . . . . . . . . . . . .
132
External Keyboard problems
Unexpected characters
Lockups and Software Problems
. . . . . . . . . . . .
133
The computer does not start
. . . . . . . . . . . .
133
The computer stops responding
. . . . . . . . . .
133
A program stops responding or crashes
repeatedly . . . . . . . . . . . . . . . .
. . . . .
133
A program is designed for an earlier
MicrosoftВ® WindowsВ® operating system
. . . . .
134
. . . . . . . . . . . .
134
A solid blue screen appears
Contents
130
. . . . . . . . . . . . . . .
IEEE 1394 Device Problems
8
120
. . . . . . . . . . . . . . .
Optical drive problems
Error Messages
119
. . . . . . . . . . . . . . . . . . . .
DellConnect .
Drive Problems
113
Dell MediaDirect problems
. . . . . . . . . . . .
134
. . . . . . . . . . . . .
135
Memory Problems
. . . . . . . . . . . . . . . . . . . .
136
Network Problems
. . . . . . . . . . . . . . . . . . .
136
Other software problems
Mobile Broadband (Wireless Wide Area
Network [WWAN]) . . . . . . . . . . . .
. . . . .
137
Power Problems .
. . . . . . . . . . . . . . . . . . . .
137
Printer Problems
. . . . . . . . . . . . . . . . . . . .
139
Scanner Problems .
. . . . . . . . . . . . . . . . . . .
Sound and Speaker Problems
. . . . . . . . . . . . .
No sound from integrated speakers
No sound from external speakers
. . . . . . . .
141
. . . . . . . . .
141
142
. . . . . . . . . . . . . . . .
142
. . . . . . . . . . . . .
142
. . . . . . . . . . . . . .
143
. . . . . . . . . . . . . . .
143
Touch Pad or Mouse Problems
Video and Display Problems
If the display is blank .
If the display is difficult to read
. . . . . . . . . .
144
. . . . . . .
145
. . . . . . . . . . . . . . . . . . . . . . . . . .
145
If only part of the display is readable
Drivers
141
. . . . . . . . . . . .
No sound from headphones
Remote Control Problems
140
What Is a Driver? .
. . . . . . . . . . . . . . . . .
145
Identifying Drivers
. . . . . . . . . . . . . . . . .
145
Reinstalling Drivers and Utilities
. . . . . . . . . .
Troubleshooting Software and Hardware
Problems . . . . . . . . . . . . . . . . . .
. . . . . . .
146
149
Contents
9
Restoring your Microsoft Windows
Operating System . . . . . . . . . .
. . . . . . . . . .
150
Restoring Windows VistaВ® . . . . . . . . . . . . .
150
Restoring Windows XP
155
. . . . . . . . . . . . . . .
13 Adding and Replacing Parts
Before You Begin
. . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
Recommended Tools
. . . . . . . . . . . . . . . .
Turning Off Your Computer
. . . . . . . . . . . . .
Before Working Inside Your Computer
Hard Drive
161
161
162
. . . . . . . . . . . . . . . . . . . . . . . .
164
Removing the Hard Drive .
. . . . . . . . . . . . .
164
Replacing the Hard Drive .
. . . . . . . . . . . . .
166
Optical Drive .
. . . . . . . . . . .
167
. . . . . . . . . . . . . . . . . . . . . .
167
. . . . . . . . . . . .
167
. . . . . . . . . . . . . . . . . . . . . . .
168
Removing the Optical Drive
Hinge Cover
Removing the Hinge Cover
. . . . . . . . . . . . .
168
Replacing the Hinge Cover
. . . . . . . . . . . . .
169
. . . . . . . . . . . . . . . . . . . . . . . . .
169
Keyboard
Removing the Keyboard
. . . . . . . . . . . . . .
170
Replacing the Keyboard
. . . . . . . . . . . . . .
171
. . . . . . . . . . . . . . . . . . . . . . . . .
172
Memory
Removing the DIMM A Memory Module .
. . . . .
172
Replacing the DIMM A Memory Module
. . . . .
173
Removing the DIMM B Memory Module .
. . . . .
175
Replacing the DIMM B Memory Module
. . . . .
176
. . . . . . . . . . . . . . .
178
Subscriber Identity Module
Contents
161
. . . . . . .
Returning a Hard Drive to Dell
10
161
Wireless Mini-Cards
. . . . . . . . . . . . . . . . . .
179
Removing a WLAN Card
. . . . . . . . . . . . . .
179
Replacing a WLAN Card
. . . . . . . . . . . . . .
181
Removing a Mobile Broadband or
WWAN Card . . . . . . . . . . .
. . . . . . . . .
182
. . . . . . . . . . . . .
185
Removing a WPAN Card
. . . . . . . . . . . . . .
186
Replacing a WPAN Card
. . . . . . . . . . . . . .
187
. . . . . . . . . . . . . . . . . .
187
Replacing a WWAN Card
Flash Cache Module
Removing the FCM
. . . . . . . . . . . . . . . . .
187
Replacing the FCM
. . . . . . . . . . . . . . . . .
188
Internal Card With BluetoothВ® Wireless
Technology . . . . . . . . . . . . . . .
. . . . . . . .
189
. . . . . . . . . . . . . . . . .
189
. . . . . . . . . . . . . . . . . . . .
190
Removing the Card
Coin-Cell Battery
Removing the Coin-Cell Battery
14 Dellв„ў QuickSet Features
. . . . . . . . . .
. . . . . . . . . . .
15 Traveling With Your Computer
Identifying Your Computer
193
195
. . . . . . . . . . . . . . .
195
. . . . . . . . . . . . . . . . .
195
. . . . . . . . . . . . . . . . . . . . . . . .
196
Packing the Computer .
Travel Tips
. . . . . . .
190
Traveling by Air .
. . . . . . . . . . . . . . . . . .
196
Contents
11
16 Getting Help .
. . . . . . . . . . . . . . . . . . . . .
Obtaining Assistance
. . . . . . . . . . . . . . . . . .
198
. . . . . . . . . . . . . . . . . . . .
198
Online Services .
. . . . . . . . . . . . . . . . . .
AutoTech Service .
. . . . . . . . . . . . . . . . .
Automated Order-Status Service
Product Information
199
199
. . . . . . . . . . . . . . .
199
. . . . . . . . . . . . . . . . . . .
200
Returning Items for Warranty Repair or Credit
. . . . .
200
Before You Call
. . . . . . . . . . . . . . . . . . . . .
201
Contacting Dell
. . . . . . . . . . . . . . . . . . . . .
203
17 Specifications
18 Appendix
. . . . . . . . . . . . . . . . . . . .
205
. . . . . . . . . . . . . . . . . . . . . . . .
215
Using the System Setup Program
. . . . . . . . . . . .
System Setup Screen .
. . . . . . . . .
216
216
Commonly Used Options
Cleaning Your Computer .
215
. . . . . . . . . . . . . . .
Viewing the System Setup Screen
. . . . . . . . . . . . . .
216
. . . . . . . . . . . . . . . .
218
. . . . . . . . .
218
. . . . . . . . . . . . . . . . . . . . .
219
Mouse
. . . . . . . . . . . . . . . . . . . . . . .
219
Media
. . . . . . . . . . . . . . . . . . . . . . . .
220
Computer, Keyboard, and Display
Touch Pad
Contents
198
. . . . . . . . .
Problems With Your Order .
12
197
. . . . .
Technical Support and Customer Service
DellConnect .
197
Dell Technical Support Policy (U.S. Only)
. . . . . . .
Definition of "Dell-Installed" Software and
Peripherals . . . . . . . . . . . . . . . . .
. . . .
221
. . . . . .
221
. . . . . . . . . . . . . . . . .
221
. . . . . . . . . . . . . . . . . . . .
221
Definition of "Third-Party" Software and
Peripherals . . . . . . . . . . . . . . .
FCC Notice (U.S. Only) .
FCC Class B .
220
Macrovision Product Notice
. . . . . . . . . . . . . .
223
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
Index
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
243
Contents
13
14
Contents
1
Finding Information
NOTE: Some features may be optional and may not ship with your computer. Some
features may not be available in certain countries.
NOTE: Additional information may ship with your computer.
What Are You Looking For?
Find It Here
вЂў
вЂў
вЂў
вЂў
Drivers and Utilities Media
A diagnostic program for my computer
Drivers for my computer
Device documentation
Notebook System Software (NSS)
Documentation and drivers are already
installed on your computer. You can use
the Drivers and Utilities media to
reinstall drivers (see "Reinstalling Drivers
and Utilities" on page 146) or run the
Dell Support 3 utility (see "Dell Support"
on page 118).
Readme files may be included on your
Drivers and Utilities media to provide
last-minute updates about technical
changes to your computer or advanced
technical-reference material for
technicians or experienced users.
NOTE: Drivers and documentation updates
can be found at support.dell.com.
вЂў
вЂў
вЂў
вЂў
вЂў
вЂў
Warranty information
Terms and Conditions (U.S. only)
Safety instructions
Regulatory information
Ergonomics information
End User License Agreement
Dellв„ў Product Information Guide
Finding Information
15
What Are You Looking For?
Find It Here
вЂў How to set up my computer
Setup Diagram
вЂў How to remove and replace parts
Microsoft Windows XP and Windows
Vistaв„ў Help and Support Center
1 Click Startв†’ Help and Supportв†’
Dell User and System Guidesв†’
вЂў Specifications
вЂў How to configure system settings
вЂў How to troubleshoot and solve
problems
вЂў Service Tag and Express Service Code
вЂў MicrosoftВ® WindowsВ® Product Key
System Guides.
2 Click the UserвЂ™s Guide for your
computer.
Service Tag and Microsoft Windows
Product Key
These labels are located on your
computer.
вЂў Use the Service Tag to identify your
computer when you use
support.dell.com or contact support.
вЂў Enter the Express Service Code to
direct your call when contacting
support.
NOTE: As an increased security measure,
the newly designed Microsoft Windows
license label incorporates a "security
portal," which looks like a missing portion
of the label, to discourage removal of the
label.
16
Finding Information
What Are You Looking For?
Find It Here
вЂў Solutions вЂ” Troubleshooting hints and
tips, articles from technicians, online
courses, and frequently asked questions
вЂў Community вЂ” Online discussion with
other Dell customers
вЂў Upgrades вЂ” Upgrade information for
components, such as the memory, hard
drive, and operating system
вЂў Customer Care вЂ” Contact
information, service call and order
status, and warranty and repair
information
вЂў Service and support вЂ” Service call
status, support history, service contract,
and online discussions with support
вЂў Dell Technical Update Service вЂ”
Proactive e-mail notification of software
and hardware updates for your
computer
вЂў Reference вЂ” Computer
documentation, details on my
computer configuration, product
specifications, and white papers
вЂў Downloads вЂ” Certified drivers,
patches, and software updates
вЂў Notebook System Software (NSS) вЂ” If
you reinstall the operating system on
your computer, you should also reinstall
the NSS utility. NSS automatically
detects your computer and operating
system, and installs the updates
appropriate for your configuration,
providing critical updates for your
operating system and support for Dell
3.5-inch USB floppy drives, IntelВ®
processors, optical drives, and USB
devices. NSS is necessary for correct
operation of your Dell computer.
Dell Support Website вЂ” support.dell.com
NOTE: Select your region or business
segment to view the appropriate support
site.
To download Notebook System Software:
1 Go to support.dell.com, select your
country/region, and then click Drivers
& Downloads.
2 Enter your Service Tag or product
model, and then click Go.
3 Select your operating system and
language, and then click Find
Downloads, or under Downloads
Search, search for the keyword
Notebook System Software.
NOTE: The support.dell.com user interface
may vary depending on your selections.
Finding Information
17
What Are You Looking For?
Find It Here
вЂў How to use Microsoft Windows XP or
Windows Vistaв„ў
Windows Help and Support
вЂў How to work with programs and files
вЂў How to personalize my desktop
Microsoft Windows XP:
1 Click the Start button and click Help
and Support.
2 Either select one of the topics listed, or
type a word or phrase that describes
your problem into the Search box, click
the arrow icon, and then click the topic
that describes your problem.
3 Follow the instructions on the screen.
Microsoft Windows Vista:
1 Click the Windows Vista Start button
, and then click Help and Support.
2 In Search Help, type a word or phrase
that describes your problem, and then
press <Enter> or click the magnifying
glass.
3 Click the topic that describes your
problem.
4 Follow the instructions on the screen.
вЂў Information on network activity, the
Power Management Wizard, hotkeys,
and other items controlled by Dell
QuickSet.
Dell QuickSet Help
To view Dell QuickSet Help, right-click
the Dell QuickSet icon in the Windows
notification area.
For more information on Dell QuickSet,
see "Dellв„ў QuickSet Features" on
page 193.
18
Finding Information
What Are You Looking For?
Find It Here
вЂў How to reinstall my operating system
Operating System Media
The operating system is already installed
on your computer. To reinstall your
operating system, use one of the
following methods:
вЂў Microsoft Windows System Restore вЂ”
Microsoft Windows System Restore
returns your computer to an earlier
operating state without affecting data
files.
вЂў Dell PC Restore вЂ” Dell PC Restore
returns your computer to its original
operating state. Dell PC Restore may
not ship with your computer.
вЂў Operating System Installation Media вЂ”
If you received operating system media
with your computer, you can use it to
restore your operating system.
For more information, see "Restoring
your Microsoft Windows Operating
System" on page 150.
After you reinstall your operating system,
use the Drivers and Utilities media to
reinstall drivers for the devices that came
with your computer.
Your operating system product key label is
located on your computer.
NOTE: The color of your operating system
installation media varies according to the
operating system you ordered.
Finding Information
19
20
Finding Information
2
About Your Computer
Determining Your ComputerвЂ™s Configuration
Based on selections that you made when purchasing your computer, your
computer has one of several different video controller configurations. To
determine your computerвЂ™s video controller configuration:
1 Access the MicrosoftВ® WindowsВ® Help and Support Center. For
instructions, see "Microsoft Windows XP and Windows Vistaв„ў Help and
Support Center" on page 16.
2 Under Pick a Task, click Use Tools to view your computer information
and diagnose problems.
3 Under My Computer Information, select Hardware.
From the My Computer Information - Hardware screen, you can view the
type of video controller installed in your computer, as well as the other
hardware components.
About Your Computer
21
Front View
1
2
4
3
14
5
13
12
6
7
11
22
10
8
9
1
camera indicator (optional)
3
display latch
4
display
5
power button
6
keyboard
7
device status lights
8
touch pad
9
consumer IR sensor
10
media control buttons
11
touch pad buttons
12
Dellв„ў MediaDirectв„ў button
13
keyboard status lights
14
digital array microphones
About Your Computer
2
camera (optional)
вЂ” Indicates that the camera is on. Based on configuration
selections you made when ordering your computer, your computer may not include a
camera.
CAMERA INDICATOR
C A M E R A вЂ” Built-in camera for video capture, conferencing, and chat. Based on
configuration selections you made when ordering your computer, your computer may
not include a camera.
DISPLAY LATCH
DISPLAY
page 47.
вЂ” Keeps the display closed.
вЂ” For more information about your display, see "Using the Display" on
P O W E R B U T T O N вЂ” Press the power button to turn on the computer or exit a power
management mode (see "Power Management Modes" on page 63).
NOTICE: To avoid losing data, turn off your computer by performing a MicrosoftВ®
WindowsВ® operating system shutdown rather than by pressing the power button.
If the computer stops responding, press and hold the power button until the
computer turns off completely (may take several seconds).
K E Y B O A R D вЂ” For more information about the keyboard, see "Using the Keyboard and
Touch Pad" on page 53.
About Your Computer
23
DEVICE STATUS LIGHTS
The blue lights located to the right of the keyboard indicate the following:
Power light вЂ“ Turns on when you turn on the computer, and blinks when
the computer is in a power management mode.
Hard-drive activity light вЂ“ Turns on when the computer reads or writes
data.
NOTICE: To avoid loss of data, never turn off the computer while the
light is flashing.
Battery status light вЂ“ Turns on steadily or blinks to indicate battery charge
status.
WiFi status light вЂ“ Turns on when wireless networking is enabled. To
enable or disable wireless networking, use the wireless switch (see "wireless
switch" on page 27).
24
About Your Computer
BluetoothВ® status light вЂ“ Turns on when an internal card with Bluetooth
wireless technology is enabled.
NOTE: The internal card with Bluetooth wireless technology is an optional
feature. The
light turns on only if you ordered the card with your
computer. For more information, see the documentation that came with your
card.
To turn off only the Bluetooth wireless technology functionality, right-click
the
icon in the notification area, and then click Disable Bluetooth
Radio.
To quickly enable or disable all wireless devices, use the wireless switch
(see "wireless switch" on page 27).
If the computer is connected to an electrical outlet, the
вЂ“ Solid blue: The battery is charging.
вЂ“ Flashing blue: The battery is almost fully charged.
вЂ“ Off: The battery is adequately charged.
light operates as follows:
If the computer is running on a battery, the
light operates as follows:
вЂ“ Off: The battery is adequately charged (or the computer is turned off).
вЂ“ Flashing amber: The battery charge is low.
вЂ“ Solid amber: The battery charge is critically low.
TOUCH PAD
вЂ” Provides the functionality of a mouse (see "Touch Pad" on page 55).
вЂ” Use these buttons much like the buttons on a mouse when
you use the touch pad to move the cursor on the display (see "Touch Pad" on page 55).
TOUCH PAD BUTTONS
MEDIA CONTROL BUTTONS
вЂ” Control CD, DVD, and Media Player playback.
Mute the sound.
Play the previous track.
Turn the volume down.
Play the next track.
About Your Computer
25
Turn the volume up.
Stop.
Play or pause.
D E L L в„ў M E D I A D I R E C T в„ў B U T T O N вЂ” Press the Dell MediaDirect button to launch
Dell MediaDirect (see "Using Dell MediaDirectв„ў" on page 74).
KEYBOARD STATUS LIGHTS
The blue lights located above the keyboard indicate the following:
9
Turns on when the numeric keypad is enabled.
A
Turns on when the uppercase letter (caps lock) function is enabled.
Turns on when the scroll lock function is enabled.
DIGITAL ARRAY MICROPHONES
26
About Your Computer
вЂ” Built-in microphone for conferencing and chat.
Left Side View
1
2
3
4
5
6
1
security cable slot
2
wireless switch
3
Dell Wi-Fi Catcher Network Locator
light
4
air vents
5
audio connectors
6
ExpressCard slot
вЂ” Lets you attach a commercially available antitheft device
to the computer (see "Security Cable Lock" on page 109).
SECURITY CABLE SLOT
W I R E L E S S S W I T C H вЂ” When enabled through Dell QuickSet, this switch can scan for
a wireless local area network (WLAN) in your vicinity. You can also use it to rapidly
turn off or on any wireless devices such as WLAN cards and internal cards with
Bluetooth wireless technology (see "Dell Wi-Fi Catcherв„ў Network Locator" on
page 107).
About Your Computer
27
1
2
3
4
1
off
Disables wireless devices.
2
on
Enables wireless devices.
3
momentary
Scans for WLAN networks (see "Dell Wi-Fi
Catcherв„ў Network Locator" on page 107).
4
Dell Wi-Fi Catcher Network
Locator light
вЂў Flashing green: Searching for networks
вЂў Solid green: Strong network found
вЂў Solid yellow: Weak network found
вЂў Flashing yellow: Error
вЂў Off: No signal found
NOTE: The Wi-Fi Catcher Network Locator light
appears only when the computer is turned off and
the wireless switch is configured in the system
setup program (BIOS) to control WiFi network
connections.
CAUTION: Do not block, push objects into, or allow dust to accumulate in the air
vents. Do not store your computer in a low-airflow environment, such as a closed
briefcase, while it is running. Restricting the airflow can damage the computer or
cause a fire.
вЂ” The computer uses an internal fan to create airflow through the vents,
which prevents the computer from overheating. The computer turns the fan on when
the computer gets hot. Fan noise is normal and does not indicate a problem with the
fan or the computer.
AIR VENTS
28
About Your Computer
AUDIO CONNECTORS
Attach headphones to the
Attach a microphone to the
connector.
connector.
E X P R E S S C A R D S L O T вЂ” Supports one ExpressCard. The computer ships with a
plastic blank installed in the slot. For more information, see "Using ExpressCards" on
page 91.
About Your Computer
29
Right Side View
2
1
4
5
6
7
3
8
9
10
1
battery status light
2
hard-drive activity light
3
power light
4
optical drive
5
eject button
6
8-in-1 memory card reader
7
IEEE 1394 connector
8
video connector (VGA)
9
network connector (RJ-45)
10
USB connectors (2)
O P T I C A L D R I V E вЂ” For more information about the optical drive, see "Using
Multimedia" on page 67.
EJECT BUTTON
вЂ” Press the eject button to open the optical drive.
8 - I N -1 M E M O R Y C A R D R E A D E R вЂ” Provides a fast and convenient way to view and
share digital photos, music, and videos stored on a memory card. The computer ships
with a plastic blank installed in the slot. The 8-in-1 memory card reader reads the
following digital memory cards:
вЂў Secure Digital (SD) memory card
вЂў SDIO card
вЂў MultiMediaCard (MMC)
вЂў Memory Stick
вЂў Memory Stick PRO
вЂў xD-Picture Card
вЂў Hi Speed-SD
вЂў Hi Density-SD
IEEE 1394 C O N N E C T O R вЂ” Connects devices supporting IEEE 1394 high-speed
transfer rates, such as some digital video cameras.
30
About Your Computer
VIDEO CONNECTOR
Connects video devices, such as a monitor.
NETWORK CONNECTOR
(RJ-45 )
Connects the computer to a network. The two lights next
to the connector indicate status and activity for wired
network connections.
For information on using the network adapter, see the
device userвЂ™s guide supplied with your computer.
USB C O N N E C T O R S
Connect USB devices, such as a mouse, keyboard, or
printer.
Back View
1
2
4
3
5
1
S-video TV-out connector
2
USB connectors (2)
3
AC adapter connector
4
battery
5
modem connector (RJ-11)
About Your Computer
31
S - V I D E O TV- O U T C O N N E C T O R
Connects your computer to a TV. Also connects digital
audio-capable devices using the TV/digital audio
adapter cable.
USB CONNECTORS
Connect USB devices, such as a mouse, keyboard, or
printer.
AC A D A P T E R C O N N E C T O R вЂ” Attaches an AC adapter to the computer. The AC
adapter converts AC power to the DC power required by the computer. You can
connect the AC adapter with your computer turned on or off.
NOTE: If your computer has the discrete video configuration, you must use the
90 W AC adapter that is shipped with your computer. Using the incorrect AC
adapter will prevent optimal system performance and produce a BIOS warning.
NOTE: Ensure the power cord is firmly attached to the AC adapter. A green LED
light on the AC adapter indicates a proper connection.
32
About Your Computer
CAUTION: The AC adapter works with electrical outlets worldwide. However,
power connectors and power strips vary among countries. Using an incompatible
cable or improperly connecting the cable to the power strip or electrical outlet
may cause fire or equipment damage.
NOTICE: When you disconnect the AC adapter cable from the computer, grasp the
connector, not the cable itself, and pull firmly, but gently to help prevent damage to
the cable.
MODEM CONNECTOR
(RJ-11 )
Connect the telephone line to the modem connector.
For information on using the modem, see the online
modem documentation supplied with your computer.
About Your Computer
33
Bottom View
1
2
3
4
10
9
8
7
6
5
1
left speaker
2
memory module/coin-cell battery
cover
3
consumer IR sensor
4
right speaker
5
wireless Mini-Card cover
6
battery
7
battery charge/health gauge
8
battery release latches (2)
9
fan
10
hard drive
вЂ” To adjust the volume of the integrated speaker, press the volume
control buttons or the mute button.
LEFT SPEAKER
MEMORY MODULE/COIN-CELL BATTERY COVER
вЂ” Covers the DIMM B memory
module and the coin-cell battery. For additional information, see "Adding and
Replacing Parts" on page 161.
34
About Your Computer
IR S E N S O R вЂ” Receives the signal from the Dell travel remote controller
for basic multimedia navigation control.
CONSUMER
R I G H T S P E A K E R вЂ” To adjust the volume of the integrated speaker, press the volume
control buttons or the mute button.
W I R E L E S S M I N I - C A R D C O V E R вЂ” Covers wireless Mini-Cards (WLAN, WWAN, or
WPAN), or a Flash Cache Module (FCM) (see "Wireless Mini-Cards" on page 179
and "Flash Cache Module" on page 187).
вЂ” When a battery is installed, you can use the computer without
connecting the computer to an electrical outlet (see "Using a Battery" on page 59).
BATTERY
B A T T E R Y C H A R G E / H E A L T H G A U G E вЂ” Provides information on the battery charge (see
"Checking the Battery Charge" on page 60).
BATTERY RELEASE LATCHES
page 65 for instructions).
вЂ” Releases the battery (see "Replacing the Battery" on
вЂ” The computer uses a fan to create airflow through the vents, which prevents
the computer from overheating. The computer turns the fan on when the computer
gets hot. Fan noise is normal and does not indicate a problem with the fan or the
computer.
FAN
HARD DRIVE
вЂ” Stores software and data.
About Your Computer
35
36
About Your Computer
Setting Up Your Computer
3
Connecting to the Internet
NOTE: ISPs and ISP offerings vary by country.
To connect to the Internet, you need a modem or network connection and an
Internet service provider (ISP). Your ISP will offer one or more of the
following Internet connection options:
вЂў
DSL connections that provide high-speed Internet access through your
existing telephone line or cellular telephone service. With a DSL
connection, you can access the Internet and use your telephone on the
same line simultaneously.
вЂў
Cable modem connections that provide high-speed Internet access
through your local cable TV line.
вЂў
Satellite modem connections that provide high-speed Internet access
through a satellite television system.
вЂў
Dial-up connections that provide Internet access through a telephone line.
Dial-up connections are considerably slower than DSL, cable, and satellite
modem connections.
вЂў
Wireless Wide Area Network (WWAN) or Mobile Broadband technology
provides a connection to the Internet using cellular technology at
broadband rates.
вЂў
Wireless Local Area Network (WLAN) connections use high-frequency
radio waves to communicate. Typically, a wireless router is connected to
the broadband cable or DSL modem that broadcasts the Internet signal to
your computer.
If you are using a dial-up connection, connect a telephone line to the modem
connector on your computer and to the telephone wall connector before you
set up your Internet connection. If you are using a DSL, cable, or satellite
modem connection, contact your ISP or cellular telephone service for setup
instructions.
Setting Up Your Computer
37
Setting Up Your Internet Connection
To set up an Internet connection with a provided ISP desktop shortcut:
1 Save and close any open files, and exit any open programs.
2 Double-click the ISP icon on the MicrosoftВ® WindowsВ® desktop.
3 Follow the instructions on the screen to complete the setup.
If you do not have an ISP icon on your desktop or if you want to set up an
Internet connection with a different ISP, perform the steps in the following
section that corresponds to the operating system your computer is using.
NOTE: If you are having problems connecting to the Internet, see "E-Mail, Modem,
and Internet Problems" on page 123. If you cannot connect to the Internet but have
successfully connected in the past, the ISP might have a service outage. Contact
your ISP to check the service status, or try connecting again later.
Windows XPВ®
1 Save and close any open files, and exit any open programs.
2 Click Startв†’ Internet Explorer.
The New Connection Wizard appears.
3 Click Connect to the Internet.
4 In the next window, click the appropriate option:
вЂў
If you do not have an ISP and want to select one, click Choose from a
list of Internet service providers (ISPs).
вЂў
If you have already obtained setup information from your ISP but you
did not receive a setup CD, click Set up my connection manually.
вЂў
If you have a CD, click Use the CD I got from an ISP.
5 Click Next.
If you selected Set up my connection manually, continue to step 6.
Otherwise, follow the instructions on the screen to complete the setup.
NOTE: If you do not know which type of connection to select, contact your ISP.
6 Click the appropriate option under How do you want to connect to the
Internet?, and then click Next.
7 Use the setup information provided by your ISP to complete the setup.
38
Setting Up Your Computer
Windows VistaВ®
NOTE: Have your ISP information ready. If you do not have an ISP, the Connect to
the Internet wizard can help you get one.
1 Save and close any open files, and exit any open programs.
2 Click the Windows Vista Start button
, and click Control Panel
3 Under Network and Internet, click Connect to the Internet.
The Connect to the Internet window appears.
4 Click either Broadband (PPPoE) or Dial-up, depending on how you want
to connect:
вЂў
Choose Broadband if you will use a DSL, satellite modem, cable TV
modem, or Bluetooth wireless technology connection.
вЂў
Chose Dial-up if you will use a dial-up modem or ISDN.
NOTE: If you do not know which type of connection to select, click Help me choose
or contact your ISP. Follow the instructions on the screen and use the setup
information provided by your ISP to complete the setup.
Transferring Information to a New Computer
You can use your operating system "wizards" to help you transfer files and
other data from one computer to anotherвЂ”for example, from an old
computer to a new computer. For instructions, see the following section that
corresponds to the operating system that your computer is running.
Microsoft Windows XP
The Microsoft Windows XP operating system provides the Files and Settings
Transfer Wizard to move data from a source computer to a new computer.
You can transfer data, such as:
вЂў
E-mail messages
вЂў
Toolbar settings
вЂў
Window sizes
вЂў
Internet bookmarks
You can transfer the data to the new computer over a network or serial
connection, or you can store it on removable media, such as a writable CD,
for transfer to the new computer.
Setting Up Your Computer
39
NOTE: You can transfer information from an old computer to a new computer by
directly connecting a serial cable to the input/output (I/O) ports of the two
computers. To transfer data over a serial connection, you must access the Network
Connections utility from the Control Panel and perform additional configuration
steps, such as setting up an advanced connection and designating the host
computer and the guest computer.
For instructions on setting up a direct cable connection between two computers,
see Microsoft Knowledge Base Article #305621, titled How to Set Up a Direct Cable
Connection Between Two Computers in Windows XP. This information may not be
available in certain countries.
For transferring information to a new computer, you must run the Files and
Settings Transfer Wizard. You can use the optional Operating System media
for this process or you can create a wizard disk with the Files and Settings
Transfer Wizard.
Running the Files and Settings Transfer Wizard With the Operating System Media
NOTE: This procedure requires the Operating System media. This media is optional
and may not be included with certain computers.
To prepare a new computer for the file transfer:
1 Open the Files and Settings Transfer Wizard: click Startв†’ All Programsв†’
Accessoriesв†’ System Toolsв†’ Files and Settings Transfer Wizard.
2 When the Files and Settings Transfer Wizard welcome screen appears,
click Next.
3 On the Which computer is this? screen, click New Computerв†’ Next.
4 On the Do you have a Windows XP CD? screen, click I will use the wizard
from the Windows XP CDв†’ Next.
5 When the Now go to your old computer screen appears, go to your old or
source computer. Do not click Next at this time.
To copy data from the old computer:
1 On the old computer, insert the Windows XP Operating System media.
2 On the Welcome to Microsoft Windows XP screen, click Perform
additional tasks.
3 Under What do you want to do?, click Transfer files and settingsв†’ Next.
4 On the Which computer is this? screen, click Old Computerв†’ Next.
40
Setting Up Your Computer
5 On the Select a transfer method screen, click the transfer method you
prefer.
6 On the What do you want to transfer? screen, select the items you want to
transfer and click Next.
After the information has been copied, the Completing the Collection
Phase screen appears.
7 Click Finish.
To transfer data to the new computer:
1 On the Now go to your old computer screen on the new computer, click
Next.
2 On the Where are the files and settings? screen, select the method you
chose for transferring your settings and files and click Next.
The wizard reads the collected files and settings and applies them to your
new computer.
When all of the settings and files have been applied, the Finished screen
appears.
3 Click Finished and restart the new computer.
Running the Files and Settings Transfer Wizard Without the Operating System
Media
To run the Files and Settings Transfer Wizard without the Operating System
media, you must create a wizard disk that will allow you to create a backup
image file to removable media.
To create a wizard disk, use your new computer with Windows XP and
perform the following steps:
1 Open the Files and Settings Transfer Wizard: click Startв†’ All Programsв†’
Accessoriesв†’ System Toolsв†’ Files and Settings Transfer Wizard.
2 When the Files and Settings Transfer Wizard welcome screen appears,
click Next.
3 On the Which computer is this? screen, click New Computerв†’ Next.
4 On the Do you have a Windows XP CD? screen, click I want to create a
Wizard Disk in the following driveв†’ Next.
5 Insert the removable media, such as a writable CD, and click OK.
Setting Up Your Computer
41
6 When the disk creation completes and the Now go to your old
computer message appears, do not click Next.
7 Go to the old computer.
To copy data from the old computer:
1 On the old computer, insert the wizard disk.
2 Click Startв†’ Run.
3 In the Open field on the Run window, browse to the path for fastwiz (on
the appropriate removable media) and click OK.
4 On the Files and Settings Transfer Wizard welcome screen, click Next.
5 On the Which computer is this? screen, click Old Computerв†’ Next.
6 On the Select a transfer method screen, click the transfer method you
prefer.
7 On the What do you want to transfer? screen, select the items you want to
transfer and click Next.
After the information has been copied, the Completing the Collection
Phase screen appears.
8 Click Finish.
To transfer data to the new computer:
1 On the Now go to your old computer screen on the new computer, click
Next.
2 On the Where are the files and settings? screen, select the method you
chose for transferring your settings and files and click Next. Follow the
instructions on the screen.
The wizard reads the collected files and settings and applies them to your
new computer.
When all of the settings and files have been applied, the Finished screen
appears.
3 Click Finished and restart the new computer.
NOTE: For more information about this procedure, search support.dell.com for
document #154781 (What Are The Different Methods To Transfer Files From My Old
Computer To My New Dellв„ў Computer Using the MicrosoftВ® WindowsВ® XP
Operating System?).
42
Setting Up Your Computer
NOTE: Access to the Dellв„ў Knowledge Base document may not be available in
certain countries.
Microsoft Windows Vistaв„ў
1 Click the Windows Vista Start button
, and then click Transfer files
and settingsв†’ Start Windows Easy Transfer.
2 In the User Account Control dialog box, click Continue.
3 Click Start a new transfer or Continue a transfer in progress.
Follow the instructions provided on the screen by the Windows Easy Transfer
wizard.
Setting Up a Printer
NOTICE: Complete the operating system setup before you connect a printer to the
computer.
See the documentation that came with the printer for setup information,
including how to:
вЂў
Obtain and install updated drivers.
вЂў
Connect the printer to the computer.
вЂў
Load paper and install the toner or ink cartridge.
For technical assistance, refer to the printer owner's manual or contact the
printer manufacturer.
Printer Cable
Your printer connects to your computer with a USB cable. Your printer may
not come with a printer cable, so if you purchase a cable separately, ensure
that it is compatible with your printer and computer. If you purchased a
printer cable at the same time you purchased your computer, the cable may
arrive in the computerвЂ™s shipping box.
Setting Up Your Computer
43
Connecting a USB Printer
NOTE: You can connect USB devices while the computer is turned on.
1 Complete the operating system setup if you have not already done so.
2 Attach the USB printer cable to the USB connectors on the computer and
the printer. The USB connectors fit only one way.
1
2
3
1
USB connector on computer
3
USB printer cable
2
USB connector on printer
3 Turn on the printer, and then turn on the computer.
If the Add New Hardware Wizard window appears, click Cancel.
4 Depending on your computerвЂ™s operating system, a printer wizard may be
available to help you install the printer driver:
If your computer is running the MicrosoftВ® WindowsВ® XP operating system
and the Add New Hardware Wizard window appears, click Cancel.
44
Setting Up Your Computer
If your computer is running the Windows Vistaв„ў operating system, click the
Windows Vista Start button
, and click Networkв†’ Add a printer to
start the Add Printer Wizard.Click Add a printer to start the Add Printer
Wizard.
NOTE: To install the printer driver, see "Reinstalling Drivers and Utilities" on
page 146 and the documentation that came with your printer.
5 Click Add a local printer or Add a network, wireless, or Bluetooth printer.
6 Follow the instructions in the Add Printer Wizard.
Power Protection Devices
Several devices are available to protect against power fluctuations and
failures:
вЂў
Surge protectors
вЂў
Line conditioners
вЂў
Uninterruptible power supplies (UPS)
Surge Protectors
Surge protectors and power strips equipped with surge protection help
prevent damage to your computer from voltage spikes that can occur during
electrical storms or after power interruptions. Some surge protector
manufacturers include warranty coverage for certain types of damage.
Carefully read the device warranty when choosing a surge protector. A device
with a higher joule rating offers more protection. Compare joule ratings to
determine the relative effectiveness of different devices.
NOTICE: Most surge protectors do not protect against power fluctuations or
power interruptions caused by nearby lightning strikes. When lightning occurs in
your area, disconnect the telephone line from the telephone wall connector and
disconnect your computer from the electrical outlet.
Many surge protectors have a telephone jack for modem protection. See the
surge protector documentation for modem connection instructions.
NOTICE: Not all surge protectors offer network adapter protection. Disconnect the
network cable from the network wall connector during electrical storms.
Setting Up Your Computer
45
Line Conditioners
NOTICE: Line conditioners do not protect against power interruptions.
Line conditioners are designed to maintain AC voltage at a fairly constant
level.
Uninterruptible Power Supplies
NOTICE: Loss of power while data is being saved to the hard drive may result in
data loss or file damage.
NOTE: To ensure maximum battery operating time, connect only your computer to
a UPS. Connect other devices, such as a printer, to a separate power strip that
provides surge protection.
A UPS protects against power fluctuations and interruptions. UPS devices
contain a battery that provides temporary power to connected devices when
AC power is interrupted. The battery charges while AC power is available. See
the UPS manufacturer documentation for information on battery operating
time and to ensure that the device is approved by Underwriters Laboratories
(UL).
46
Setting Up Your Computer
4
Using the Display
Adjusting Brightness
When a Dellв„ў computer is running on battery power, you can conserve power
by setting the display brightness to the lowest comfortable level.
вЂў
Press <Fn> and the up-arrow key to increase brightness on the integrated
display only (not on an external monitor).
вЂў
Press <Fn> and the down-arrow key to decrease brightness on the
integrated display only (not on an external monitor).
NOTE: Brightness key combinations only affect the display on your portable
computer, not monitors or projectors that you attach to your portable computer or
docking device. If your computer is connected to an external monitor and you try to
change the brightness level, the Brightness Meter may appear, but the brightness
level on the external device does not change.
Using a Projector
When you start the computer with an external device attached (such as an
external monitor or projector) and turned on, the image may appear on either
the computer display or the external device.
Press <Fn><F8> to switch the video image between the display only, the
external device only, or the display and the external device simultaneously.
Making Images and Text Look Bigger or Sharper
NOTE: If you change the display resolution from the current settings, the image
may appear blurry or text may be hard to read if you change the resolution to one
not supported by your computer and display. Before you change any of the display
settings, make a note of the current settings so you can change back to the
previous settings if you need to.
You can enhance the legibility of text and change the appearance of images
on the screen by adjusting display resolution. As you increase resolution,
items appear smaller on the screen. In contrast, lower resolution causes text
Using the Display
47
and images to appear larger and can benefit people with vision impairments.
To display a program at a specific resolution, both the video card and the
display must support the program, and the necessary video drivers must be
installed.
NOTE: Use only the Dell-installed video drivers, which are designed to offer the
best performance with your Dell-installed operating system.
If you choose a resolution or color palette that is higher than the display
supports, the settings adjust automatically to the closest supported values.
To set the display resolution and refresh rate for your display, perform the
steps in the following section that corresponds to the operating system your
computer is using.
MicrosoftВ® WindowsВ® XP
1 Click Startв†’ Settingsв†’ Control Panel.
2 Under Pick a category, click Appearance and Themes.
3 Under Pick a task, click the area you want to change, or under or pick a
Control Panel icon, click Display.
4 In the Display Properties window, click the Settings tab.
5 Try different settings for Color quality and Screen resolution.
NOTE: As the resolution increases, icons and text appear smaller on the screen.
Windows Vistaв„ў
1 Click the Windows Vista Start button
, and click Control Panel.
2 Under Appearance and Personalization, click Adjust screen resolution.
3 In the Display Settings window, under Resolution, slide the slide bar to
the left or right to decrease/increase the screen resolution.
4 Click How do I get the best display? for further instructions.
If the video resolution setting is higher than that supported by the display, the
computer enters pan mode. In pan mode, the entire video image cannot be
displayed at one time, and the taskbar that usually appears at the bottom of
the desktop may no longer be visible. To view the parts of the video image
that are not visible, you can use the touch pad or track stick to move (or pan)
the image up, down, left, and right.
48
Using the Display
NOTICE: You can damage an external monitor by using an unsupported refresh
rate. Before adjusting the refresh rate on an external monitor, see the userвЂ™s guide
for the monitor.
Using Both a Monitor and Your Computer Display
You can attach an external monitor or projector to your computer and use it
as an extension of your display (known as dual independent display or extended
desktop mode). This mode allows you to use both screens independently and
drag objects from one screen to the other, effectively doubling the amount of
viewable work space.
To use extended desktop mode, perform the steps in the following section
that corresponds to the operating system your computer is using.
Microsoft Windows XP
1 Connect the external monitor, TV, or projector to the computer.
2 Click Startв†’ Settingsв†’ Control Panel.
3 Under Pick a category, click Appearance and Themes.
4 Under Pick a task..., click the area you want to change, or under or pick a
Control Panel icon, click Display.
5 In the Display Properties window, click the Settings tab.
NOTE: If you choose a resolution or color palette that is higher than the display
supports, the settings adjust automatically to the closest supported values. For
more information, see your operating system documentation.
6 Click the monitor 2 icon, click the Extend my Windows desktop... check
box, and then click Apply.
7 Change Screen Area to the appropriate sizes for both displays and click
Apply.
8 If prompted to restart the computer, click Apply the new color setting
without restarting and click OK.
9 If prompted, click OK to resize your desktop.
10 If prompted, click Yes to keep the settings.
11 Click OK to close the Display Properties window.
Using the Display
49
To disable dual independent display mode:
1 Click the Settings tab in the Display Properties window.
2 Click the monitor 2 icon, uncheck the Extend my Windows desktop onto
this monitor option, and then click Apply.
If necessary, press <Fn><F8> to bring the screen image back to the
computer display.
Windows Vista
1 Click the Windows Vista Start button
, and click Control Panel.
2 Under Appearance and Personalization, click Adjust screen resolution.
3 In the Display Settings window, click the monitor 2 icon, click the Extend
the desktop onto this monitor check box, and then click Apply.
4 Click OK to close the Display Settings window.
To disable extended desktop mode:
1 In the Display Settings window, click the Settings tab.
2 Click the monitor 2 icon, uncheck the Extend the desktop onto this
monitor option, and then click Apply.
Setting Display Resolution and Refresh Rate
NOTE: If you change the display resolution from the current settings, the image
may appear blurry or text may be hard to read if you change the resolution to one
not supported by your computer and display. Before you change any of the display
settings, make a note of the current settings so you can change back to the
previous settings if needed.
You can enhance the legibility of text and change the appearance of images
on the screen by adjusting display resolution. As you increase resolution,
items appear smaller on the screen. In contrast, lower resolution causes text
and images to appear larger and can benefit people with vision impairments.
To display a program at a specific resolution, both the video card and the
display must support the program, and the necessary video drivers must be
installed.
NOTE: Use only the Dell-installed video drivers, which are designed to offer the
best performance with your Dell-installed operating system.
50
Using the Display
If you choose a resolution or color palette that is higher than the display
supports, the settings adjust automatically to the closest supported values.
To set the display resolution and refresh rate for your display, perform the
steps in the following section that corresponds to the operating system your
computer is using.
Microsoft Windows XP
1 Click Startв†’ Settingsв†’ Control Panel.
2 Under Pick a category, click Appearance and Themes.
3 Under Pick a task..., click the area you want to change, or under or pick a
Control Panel icon, click Display.
4 In the Display Properties window, click the Settings tab.
5 Try different settings for Color quality and Screen resolution.
NOTE: As the resolution increases, icons and text appear smaller on the screen.
Windows Vista
1 Click the Windows Vista Start button
and click Control Panel.
2 Under Appearance and Personalization, click Adjust screen resolution.
3 In the Display Settings window, under Resolution, move the slide bar to
the left or right to decrease or increase the screen resolution.
NOTE: For additional instructions, click How do I get the best display?
Using the Display
51
52
Using the Display
5
Using the Keyboard and Touch Pad
Numeric Keypad
numeric keypad
The numeric keypad functions like the numeric keypad on an external
keyboard. Each key on the keypad has multiple functions. The keypad
numbers and symbols are marked in blue on the right of the keypad keys. To
type a number or symbol, hold down <Fn> and press the desired key.
вЂў
To enable the keypad, press <Num Lk>. The
keypad is active.
вЂў
To disable the keypad, press <Num Lk> again.
9
light indicates that the
Using the Keyboard and Touch Pad
53
Key Combinations
System Functions
<Ctrl><Shift><Esc>
Opens the Task Manager window.
Display Functions
<Fn><F8>
Displays icons representing all currently
available display options (display only, external
monitor or projector only, both display and
projector, etc). Highlight the desired icon to
switch the display to that option.
<Fn> and up-arrow key
Increases brightness on the integrated display
only (not on an external monitor).
<Fn> and down-arrow key
Decreases brightness on the integrated display
only (not on an external monitor).
Battery
<Fn><F3>
Displays the Dellв„ў QuickSet Battery Meter
(see "Dellв„ў QuickSet Battery Meter" on
page 60).
Power Management
<Fn><Esc>
54
Activates a power management mode. You can
reprogram this keyboard shortcut to activate a
different power management mode using the
Advanced tab in the Power Options
Properties window (see "Power Management
Modes" on page 63).
Using the Keyboard and Touch Pad
MicrosoftВ® WindowsВ® Logo Key Functions
Windows logo key and <m>
Minimizes all open windows.
Windows logo key and
<Shift><m>
Restores all minimized windows. This key
combination functions as a toggle to restore
minimized windows following the use of the
Windows logo key and <m> combination.
Windows logo key and <e>
Starts Windows Explorer.
Windows logo key and <r>
Opens the Run dialog box.
Windows logo key and <f>
Opens the Search Results dialog box.
Windows logo key and
<Ctrl><f>
Opens the Search Results-Computer dialog box
(if the computer is connected to a network).
Windows logo key and <Pause> Opens the System Properties dialog box.
Dellв„ў QuickSet Key Combinations
If Dell QuickSet is installed, you can use other shortcut keys for functions
such as the Battery Meter or activating power management modes. For more
information about Dell QuickSet key combinations, right-click the QuickSet
icon in the notification area, and then click Help.
Adjusting Keyboard Settings
To adjust keyboard operation, such as the character repeat rate:
1 Click Start, and then click Control Panel.
2 Click Hardware and Sound.
3 Click Keyboard.
Touch Pad
The touch pad detects the pressure and movement of your finger to allow you
to move the cursor on the display. Use the touch pad and touch pad buttons
as you would use a mouse.
Using the Keyboard and Touch Pad
55
1
2
1
touch pad
2
silk screen with scroll zones
вЂў
To move the cursor, lightly slide your finger over the touch pad.
вЂў
To select an object, lightly tap once on the surface of the touch pad or use
your thumb to press the left touch-pad button.
вЂў
To select and move (or drag) an object, position the cursor on the object
and tap twice on the touch pad. On the second tap, leave your finger on
the touch pad and move the selected object by sliding your finger over the
surface.
вЂў
To double-click an object, position the cursor on the object and tap twice
on the touch pad or use your thumb to press the left touch-pad button
twice.
Customizing the Touch Pad
You can use the Mouse Properties window to disable the touch pad or adjust
the touch pad settings.
1 Click Start, and then click Control Panel.
2 Click Hardware and Sound.
56
Using the Keyboard and Touch Pad
3 Click Mouse.
4 In the Mouse Properties window:
вЂў
Click the Device Select tab to disable the touch pad.
вЂў
Click the Touch Pad tab to adjust touch pad settings.
5 Click OK to save the settings and close the window.
Using the Keyboard and Touch Pad
57
58
Using the Keyboard and Touch Pad
6
Using a Battery
Battery Performance
NOTE: For information about the Dell warranty for your computer, see the Product
Information Guide or separate paper warranty document that shipped with your
computer.
For optimal computer performance and to help preserve BIOS settings,
operate your Dellв„ў portable computer with the main battery installed at all
times. One battery is supplied as standard equipment in the battery bay.
NOTE: Because the battery may not be fully charged, use the AC adapter to
connect your new computer to an electrical outlet the first time you use the
computer. For best results, operate the computer with the AC adapter until the
battery is fully charged. To view battery charge status, place the mouse cursor over
the battery icon in the Windows notification area.
NOTE: Battery operating time (the time the battery can hold a charge) decreases
over time. Depending on how often the battery is used and the conditions under
which it is used, you may need to purchase a new battery during the life of your
computer.
NOTE: It is recommended that you connect your computer to an electrical outlet
when writing to media.
Battery operating time varies depending on operating conditions. Operating
time is significantly reduced when you perform operations including, but not
limited to, the following:
вЂў
Using optical drives.
вЂў
Using wireless communications devices, ExpressCards, memory cards, or
USB devices.
вЂў
Using high-brightness display settings, 3D screen savers, or other powerintensive programs such as complex 3D graphics applications.
вЂў
Running the computer in maximum performance mode (see "Power
Management Modes" on page 63 for information about accessing
Windows Power Options Properties or Dell QuickSet, which you can use
to configure power management settings).
Using a Battery
59
You can check the battery charge before you insert the battery into the
computer. You can also set power management options to alert you when the
battery charge is low.
CAUTION: Using an incompatible battery may increase the risk of fire or
explosion. Replace the battery only with a compatible battery purchased from
Dell. The battery is designed to work with your Dell computer. Do not use batteries
from other computers with your computer.
CAUTION: Do not dispose of batteries with household waste. When your battery
no longer holds a charge, call your local waste disposal or environmental agency
for advice on disposing of a lithium-ion battery (see "Battery Disposal" in the
Product Information Guide).
CAUTION: Misuse of the battery may increase the risk of fire or chemical burn.
Do not puncture, incinerate, disassemble, or expose the battery to temperatures
above 65В°C (149В°F). Keep the battery away from children. Handle damaged or
leaking batteries with extreme care. Damaged batteries may leak and cause
personal injury or equipment damage.
Checking the Battery Charge
You can check the battery charge on your computer using any one of the
following methods:
вЂў
Dell QuickSet Battery Meter
вЂў
Microsoft Windows battery meter icon
вЂў
Battery charge/health gauge located on the battery
вЂў
Low-battery warning pop-up window
located in the notification area
Dellв„ў QuickSet Battery Meter
To view the Dell QuickSet Battery Meter:
вЂў
Double-click the Dell QuickSet icon in the taskbar, and then click Battery
Meter.
or
вЂў
Press <Fn><F3>.
The Battery Meter displays the status, battery health, charge level, and charge
completion time for the battery in your computer.
60
Using a Battery
For more information about QuickSet, right-click the QuickSet icon, and
then click Help.
MicrosoftВ® WindowsВ® Battery Meter
The battery meter indicates the remaining battery charge. To check the
battery meter, double-click the
icon in the notification area.
Charge Gauge
By either pressing once or pressing and holding the status button on the
battery charge gauge, you can check:
вЂў
Battery charge (check by pressing and releasing the status button)
вЂў
Battery health (check by pressing and holding the status button)
The battery operating time is largely determined by the number of times it is
charged. After hundreds of charge and discharge cycles, batteries lose some
charge capacityвЂ”or battery health. Therefore, a battery can show a status of
charged, but maintain a reduced charge capacity (health).
Check the Battery Charge
To check the battery charge, press and release the status button on the battery
charge gauge to illuminate the charge indicator lights. Each light represents
approximately 20 percent of the total battery charge. For example, if the
battery has 80 percent of its charge remaining, four of the lights are on. If no
lights are on, the battery has no charge.
Check the Battery Health
NOTE: You can check battery health in one of two ways: by using the charge gauge
on the battery, as described below, and by using the Battery Meter in Dell QuickSet.
For information about QuickSet, right-click the QuickSet icon in the notification
area, and then click Help.
To check the battery health using the charge gauge, press and hold the status
button on the battery charge gauge for at least 3 seconds to illuminate the
health indicator lights. Each light represents incremental degradation. If no
lights appear, the battery is in good condition, and more than 80 percent of its
original charge capacity remains. If five lights appear, less than 60 percent of
Using a Battery
61
the charge capacity remains, and you should consider replacing the battery
(see "Battery" on page 210 for more information about the battery operating
time).
Low-Battery Warning
NOTICE: To avoid losing or corrupting data, save your work immediately after a
low-battery warning, then connect the computer to an electrical outlet. If the
battery runs completely out of power, Sleep state begins automatically.
A pop-up window warns you when the battery charge is approximately
90 percent depleted. The computer enters Standby or Sleep mode when the
battery charge is at a critically low level.
You can change the settings for the battery alarms in Dell QuickSet or the
Power Options window (see "Power Management Modes" on page 63).
Conserving Battery Power
To conserve battery power on your portable computer, do any of the
following:
62
вЂў
Connect the computer to an electrical outlet when possible; battery life is
largely determined by the number of times the battery is used and
recharged.
вЂў
Place the computer in standby mode or hibernate mode when you leave
the computer unattended for long periods of time. See "Power
Management Modes" on page 63.
вЂў
Configure the power management settings using either Dell QuickSet or
Microsoft Windows Power Options to optimize your computerвЂ™s power
usage (see "Power Management Modes" on page 63).
вЂў
Use the Power Management Wizard or the Power Options Properties
Sleep power state when you leave the computer unattended for long
periods of time (see "Standby and Sleep Mode" on page 63).
Using a Battery
Power Management Modes
Standby and Sleep Mode
Standby mode (sleep mode in Microsoft Windows Vistaв„ў) conserves power
by turning off the display and the hard drive after a predetermined period of
inactivity (a time-out). When the computer exits standby or sleep mode, it
returns to the same operating state it was in before entering standby or sleep
mode.
NOTICE: If your computer loses AC and battery power while in standby or sleep
mode, it may lose data.
To enter standby mode in Windows XP, click Startв†’ Turn off computerв†’
Stand by.
To enter sleep mode in Windows Vista, click the Windows Vista Start button
, and then click Sleep.
Depending on how you set the power management options in the Power
Options Properties window or the QuickSet Power Management Wizard, you
may also use one of the following methods:
вЂў
Press the power button.
вЂў
Close the display.
вЂў
Press <Fn><Esc>.
To exit standby or sleep mode, press the power button or open the display,
depending on how you set the power management options. You cannot make
the computer exit standby or sleep mode by pressing a key or touching the
touch pad.
Hibernate Mode
Hibernate mode conserves power by copying system data to a reserved area on
the hard drive and then completely turning off the computer. When the
computer exits hibernate mode, it returns to the same operating state it was
in before entering hibernate mode.
NOTICE: You cannot remove devices or undock your computer while your
computer is in hibernate mode.
Your computer enters hibernate mode if the battery charge level becomes
critically low.
Using a Battery
63
To enter hibernate mode in Windows XP, click the Start button, click Turn off
computer, press and hold <Shift>, and then click Hibernate.
To enter hibernate mode in Windows Vista, click the Windows Vista Start
button
, and then click Hibernate.
Depending on how you set the power management options in the Power
Options Properties window or the QuickSet Power Management Wizard, you
may also use one of the following methods to enter hibernate mode:
вЂў
Press the power button.
вЂў
Close the display.
вЂў
Press <Fn><Esc>.
NOTE: Some ExpressCards may not operate correctly after the computer exits
hibernate mode. Remove and reinsert the card (see "Removing an ExpressCard or
Blank" on page 93), or simply restart (reboot) your computer.
To exit hibernate mode, press the power button. The computer may take a
short time to exit hibernate mode. You cannot make the computer exit
hibernate mode by pressing a key or touching the touch pad. For more
information on hibernate mode, see the documentation that came with your
operating system.
Configuring Power Management Settings
You can use Dell QuickSet or Windows Power Options to configure the power
management settings on your computer.
вЂў
For information on how to use the Dell QuickSet Power Management
wizard, right-click the QuickSet icon in the notification area, click Help,
and then select Power Management.
Accessing Power Options Properties
Windows XP
Click Startв†’ Control Panelв†’ Performance and Maintenance, and then
click Power Options
64
Using a Battery
Windows Vista
Click the Windows Vista Start button
, click Control Panel, click System
and Maintenance, and then click Power Options.
Charging the Battery
NOTE: Charge time is longer with the computer turned on. You can leave the
battery in the computer for as long as you like. The batteryвЂ™s internal circuitry
prevents the battery from overcharging.
When you connect the computer to an electrical outlet or install a battery
while the computer is connected to an electrical outlet, the computer checks
the battery charge and temperature. If necessary, the AC adapter then charges
the battery and maintains the battery charge.
If the battery is hot from being used in your computer or being in a hot
environment, the battery may not charge when you connect the computer to
an electrical outlet.
The battery is too hot to start charging if the battery light
flashes
alternately blue and amber. Disconnect the computer from the electrical
outlet and allow the computer and the battery to cool to room temperature,
then connect the computer to an electrical outlet to continue charging the
battery.
For more information about resolving problems with a battery, see "Power
Problems" on page 137.
Replacing the Battery
CAUTION: Using an incompatible battery may increase the risk of fire or
explosion. Replace the battery only with a compatible battery purchased from
Dell. The battery is designed to work with your Dell computer. Do not use batteries
from other computers with your computer.
CAUTION: Before performing these procedures, turn off the computer, disconnect
the AC adapter from the electrical outlet and the computer, disconnect the modem
from the wall connector and the computer, and remove any other external cables
from the computer.
NOTICE: You must remove all external cables from the computer to avoid possible
connector damage.
Using a Battery
65
NOTICE: If you choose to replace the battery with the computer in standby or sleep
mode, you have up to 1 minute to complete the battery replacement before the
computer shuts down and loses any unsaved data.
To remove the battery:
1 If the computer is connected to a docking device (docked), undock it. See
the documentation that came with your docking device for instructions.
2 Ensure that the computer is turned off.
3 Turn the computer over.
4 Slide and click the battery release latches to keep them open.
5 Slide the battery out of the bay.
1
1
battery
2
2
battery release latches (2)
To replace the battery, slide the battery into the bay until it latches into place.
Storing a Battery
Remove the battery when you store your computer for an extended period of
time. A battery discharges during prolonged storage. After a long storage
period, recharge the battery fully (see "Charging the Battery" on page 65)
before you use it.
66
Using a Battery
7
Using Multimedia
Playing Media
NOTICE: Do not press down on the optical drive tray when you open or close it.
Keep the tray closed when you are not using the drive.
NOTICE: Do not move the computer while playing media.
1 Press the eject button on the front of the drive.
2 Place the disc, label side up, in the center of the tray and snap the disc
onto the spindle.
3 Push the tray back into the drive.
To format media for storing or copying data, see the media software that
came with your computer.
NOTE: Ensure that you follow all copyright laws when copying media.
Using Multimedia
67
A CD player includes the following basic buttons:
Play
Move backward within the current track
Pause
Move forward within the current track
Stop
Go to the previous track
Eject
Go to the next track
A DVD player includes the following basic buttons:
Stop
Restart the current chapter
Play
Fast forward
Pause
Fast reverse
Advance a single frame while in pause mode
Go to the next title or chapter
Continuously play the current title or chapter
Go to the previous title or chapter
Eject
For more information on playing media, click Help on the media player
(if available).
68
Using Multimedia
Playing Media Using Dell Travel Remote
The Dell Travel Remote is designed to control Dell Media Direct and
Windows Vistaв„ў Media Center. It can work only with specified computers.
For more details, go to the Dell Support website at support.dell.com.
To play media using Dell Travel Remote:
1 Install the CR2106 coin-cell battery in your remote control.
2 Launch Windows Vista Media Center, and then click Start
в†’ Programs.
3 Use the remote control buttons to play media.
1
2
3
18
4
17
5
6
16
7
15
8
14
9
13
10
12
11
1
Infrared Transmitter
2
Page Up
3
Page Down
4
Arrow Up
5
OK/Enter/Select
6
Arrow Right
Using Multimedia
69
7
Arrow Down
8
Play/Pause
9
Forward
10
Skip Forward
11
Stop
12
Skip Back
13
Reverse
14
Back
15
Arrow Left
16
Mute
17
Volume Down
18
Volume Up
Copying CD, DVD, and Blu-ray Discв„ў (BD) Media
This section applies only to computers that have a DVD+/-RW drive or a
BD-RE drive.
NOTE: Ensure that you observe all copyright laws when copying media.
NOTE: The types of optical drives offered by Dell may vary by country.
The following instructions explain how to make an exact copy of a CD, DVD,
or BD using Roxio Creator. You can also use Roxio Creator for other purposes,
such as creating music CDs from audio files stored on your computer or
backing up important data. For help, open Roxio Creator, and then press <F1>.
The DVD drives and BD drives installed in Dell computers do not support
HD-DVD media. For a list of supported media formats, see "Using Blank CD,
DVD, and BD Media" on page 71.
How to Copy a CD, DVD, or BD
NOTE: BD media can only be copied to other BD media.
NOTE: Copying a BD-R to BD-RE will not produce an exact copy.
NOTE: Most commercial DVDs and BDs have copyright protection and cannot be
copied using Roxio Creator.
1 Click Start
в†’ All Programsв†’ Roxio Creatorв†’ Projectsв†’ Copy.
2 Under the Copy tab, click Copy Disc.
70
Using Multimedia
3 To copy the CD, DVD, or BD:
вЂў
If you have one optical drive, insert the source disc into the drive,
ensure that the settings are correct, and then click the Copy Disc
button to continue. The computer reads your source disc and copies
the data to a temporary folder on your computer hard drive.
When prompted, insert a blank disc into the drive and click OK.
вЂў
If you have two optical drives, select the drive into which you have
inserted your source disc and click the Copy Disc button to continue.
The computer copies the data from the source disc to the blank disc.
Once you have finished copying the source disc, the disc that you have
created automatically ejects.
Using Blank CD, DVD, and BD Media
DVD-writable drives can write to both CD and DVD recording media.
BD-writable drives can write to CD, DVD and BD recording media.
Use blank CD-Rs to record music or permanently store data files. After
creating a CD-R, you cannot write to that CD-R again (see the Sonic
documentation for more information). Use a blank CD-RW if you plan to
erase, rewrite, or update information on that disc later.
Blank DVD+/-R or BD-R media can be used to permanently store large
amounts of information. After you create a DVD+/-R or BD-R, you may not
be able to write to that disc again if the disc is finalized or closed during the
final stage of the disc creation process. Use blank DVD+/-RW or BD-RE
media if you plan to erase, rewrite, or update information on that disc later.
CD-Writable Drives
Media Type
Read
Write
Rewritable
CD-R
Yes
Yes
No
CD-RW
Yes
Yes
Yes
Using Multimedia
71
DVD-Writable Drives
Media Type
Read
Write
Rewritable
CD-R
Yes
Yes
No
CD-RW
Yes
Yes
Yes
DVD+R
Yes
Yes
No
DVD-R
Yes
Yes
No
DVD+RW
Yes
Yes
Yes
DVD-RW
Yes
Yes
Yes
DVD+R DL
Yes
Yes
No
DVD-R DL
Yes
Yes
No
Media Type
Read
Write
Rewritable
CD-R
Yes
Yes
No
CD-RW
Yes
Yes
Yes
DVD+R
Yes
Yes
No
DVD-R
Yes
Yes
No
DVD+RW
Yes
Yes
Yes
DVD-RW
Yes
Yes
Yes
DVD+R DL
Yes
Yes
No
DVD-R DL
Yes
Yes
No
BD-R
Yes
Yes
No
BD-RE
Yes
Yes
Yes
BD-Writable Drives
Helpful Tips
72
вЂў
Use MicrosoftВ® WindowsВ® Explorer to drag and drop files to a CD-R or
CD-RW only after you start Roxio Creator and open a Creator project.
вЂў
Do not burn a blank CD-R or CD-RW to its maximum capacity; for
example, do not copy a 650-MB file to a blank 650-MB CD. The CD-RW
drive needs 1вЂ“2 MB of the blank space to finalize the recording.
Using Multimedia
вЂў
Use CD-Rs to burn music CDs that you want to play in regular stereos.
CD-RWs do not play in most home or car stereos.
вЂў
Music MP3 files can be played only on MP3 players or on computers that
have MP3 software installed.
вЂў
Use a blank CD-RW to practice CD recording until you are familiar with
CD recording techniques. If you make a mistake, you can erase the data on
the CD-RW and try again. You can also use blank CD-RWs to test music
file projects before you record the project permanently to a blank CD-R.
вЂў
You cannot create audio DVDs with Roxio Creator.
вЂў
Commercially available DVD players used in home theater systems may
not support all available DVD formats. For a list of formats supported by
your DVD player, see the documentation provided with your DVD player
or contact the manufacturer.
вЂў
Commercially available BD players used in home theater systems may not
support all available BD formats. For a list of formats supported by your
BD player, see the documentation provided with your BD player or contact
the manufacturer.
вЂў
See the Roxio website at www.sonic.com or the Blu-ray Discв„ў Association
website at blu-raydisc.com for additional information.
Adjusting the Volume
NOTE: When the speakers are muted, you do not hear the media playing.
1 Right-click the volume icon in the notification area.
2 Click Open Volume Mixer.
3 Click and drag the bar to slide it up or down to increase or decrease the
volume.
For more information on volume control options, click Help in the Volume
Mixer window.
The Volume Meter displays the current volume level, including mute, on your
computer. Either click the QuickSet icon in the notification area and select or
deselect Disable On Screen Volume Meter, or press the volume control
buttons to enable or disable the Volume Meter on the screen.
Using Multimedia
73
Adjusting the Picture
If an error message notifies you that the current resolution and color depth
are using too much memory and preventing media playback, adjust the
display properties:
1 Click Start
в†’ Control Panelв†’ Appearance and Personalization.
2 Under Personalization, click Adjust screen resolution.
3 On Display Settings, click and drag the bar to reduce the resolution setting.
4 In the drop-down menu under Color quality, click Medium (16 bit).
5 Click OK.
Using Dell MediaDirectв„ў
Dell MediaDirect is an instant-on multimedia playback mode for digital
media. Press the Dell MediaDirect button, located on the hinge cover, to
launch Dell MediaDirect. When your computer is turned off or in Sleep
state, you can press the Dell MediaDirect button to start the computer and
automatically launch the Dell MediaDirect application.
1
1
74
Dell MediaDirect button
Using Multimedia
NOTE: You cannot reinstall Dell MediaDirect if you voluntarily reformat the hard
drive. You need the installation software to reinstall Dell MediaDirect. Contact Dell
for assistance (see "Contacting Dell" on page 203).
For more information on using Dell MediaDirect, use the Help menu in the
Dell MediaDirect application.
Connecting Your Computer to a TV or
Audio Device
NOTE: Video and audio cables for connecting your computer to a TV or other audio
device may not be included with your computer. Cables and TV/digital audio
adapter cables are available for purchase from Dell.
Your computer has an S-video TV-out connector that, together with a
standard S-video cable, a composite video adapter cable, or a component
video adapter cable (available from Dell), enable you to connect the
computer to a TV.
Your TV has either an S-video input connector, a composite video-input
connector, or a component video-input connector. Depending on what type
of connector is available on your TV, you can use a commercially available
S-video cable, composite video cable, or component video cable to connect
your computer to your TV.
1
1
S-video TV-out connector
2
2
S-video cable
Using Multimedia
75
1
2
3
4
5
1
S-video TV-out connector
2
composite video adapter
3
S/PDIF digital audio connector
4
composite video-output connector
5
S-video connector
1
2
3
4
5
6
1
S-video TV-out connector
2
composite video adapter
3
S/PDIF digital audio connector
4
Pr (red) component video-output
connector
5
Pb (blue) component video-output
connector
6
Y (green) component video-output
connector
If you want to connect your computer to a TV or audio device, it is
recommended that you connect video and audio cables to your computer in
one of the following combinations:
вЂў
S-video and standard audio
вЂў
Composite video and standard audio
вЂў
Component-out video and standard audio
NOTE: See the diagrams at the beginning of each subsection to help you determine
which method of connection you should use.
76
Using Multimedia
When you finish connecting the video and audio cables between your
computer and your TV, you must enable your computer to work with the TV.
See "Enabling the Display Settings for a TV" on page 90 to ensure that the
computer recognizes and works properly with the TV. Additionally, if you are
using S/PDIF digital audio, see "Enabling S/PDIF Digital Audio" on page 90.
S-Video and Standard Audio
1
2
1
audio connector
2
S-video TV-out connector
1
2
1
standard S-video cable
2
standard audio cable
Using Multimedia
77
1 Turn off the computer and the TV and/or audio device that you want to connect.
NOTE: If your TV or audio device supports S-video but not S/PDIF digital audio, you
can connect an S-video cable directly to the S-video TV-out connector on the
computer (without the TV/digital audio adapter cable).
2 Plug one end of the S-video cable into the S-video output connector on
the computer.
3 Plug the other end of the S-video cable into the S-video input connector
on your TV.
4 Plug the single-connector end of the audio cable into the headphone
connector on your computer.
5 Plug the two RCA connectors on the other end of the audio cable into the
audio input connectors on your TV or other audio device.
6 Turn on the TV and any audio device that you connected (if applicable),
and then turn on the computer.
7 See "Enabling the Display Settings for a TV" on page 90 to ensure that the
computer recognizes and works properly with the TV.
S-Video and S/PDIF Digital Audio
1
1
78
S-video TV-out connector
Using Multimedia
2
2
composite video adapter
1
2
3
1
composite video adapter
3
S/PDIF digital audio cable
2
S-video cable
1 Turn off the computer and the TV and/or the audio device that you want
to connect.
2 Connect the composite video adapter to the S-video TV-out connector on
your computer.
3 Plug one end of the S-video cable into the S-video output connector on
the composite video adapter.
1
composite video adapter
1
2
2
S-video cable
4 Plug the other end of the S-video cable into the S-video input connector
on the TV.
5 Plug one end of the S/PDIF digital audio cable into the digital audio
connector on the composite video adapter cable.
Using Multimedia
79
1
1
2
composite video adapter
2
S/PDIF digital audio cable
6 Plug the other end of the S/PDIF digital audio cable into the audio input
connector on your TV or audio device.
7 Turn on the TV, turn on any audio device that you connected (if
applicable), and then turn on the computer.
8 See "Enabling the Display Settings for a TV" on page 90 to ensure that the
computer recognizes and works properly with the TV.
Composite Video and Standard Audio
1
2
80
1
audio input connector
3
composite video adapter
Using Multimedia
3
2
S-video TV-out connector
1
2
3
1
composite video adapter
3
standard audio cable
2
composite video cable
1 Turn off the computer and the TV and/or audio device that you want to
connect.
2 Connect the composite video adapter to the S-video TV-out connector on
your computer.
3 Plug one end of the composite video cable into the composite videooutput connector on the composite video adapter.
1
2
1
composite video adapter
2
composite video cable
4 Plug the other end of the composite video cable into the composite videoinput connector on the TV.
Using Multimedia
81
5 Plug the single-connector end of the audio cable into the headphone
connector on the computer.
6 Plug the two RCA connectors on the other end of the audio cable into the
audio input connectors on your TV or other audio device.
7 Turn on the TV, turn on any audio device that you connected (if
applicable), and then turn on the computer.
8 See "Enabling the Display Settings for a TV" on page 90 to ensure that the
computer recognizes and works properly with the TV.
Composite Video and S/PDIF Digital Audio
1
1
82
S-video TV-out connector
Using Multimedia
2
2
composite video cable
1
2
3
1
composite video adapter
3
standard audio cable
2
composite video cable
1 Turn off the computer and the TV and/or audio device that you want to
connect.
2 Connect the composite video adapter to the S-video TV-out connector on
the computer.
3 Plug one end of the composite video cable into the composite video-input
connector on the composite video adapter.
1
2
1
composite video adapter
2
composite video cable
4 Plug the other end of the composite video cable into the composite videoinput connector on the TV.
5 Plug one end of the S/PDIF digital audio cable into the S/PDIF audio
connector on the composite video adapter.
Using Multimedia
83
1
1
2
composite video adapter
2
S/PDIF digital audio cable
6 Plug the other end of the digital audio cable into the S/PDIF input
connector on your TV or other audio device.
7 Turn on the TV, turn on any audio device that you connected (if
applicable), and then turn on the computer.
8 See "Enabling the Display Settings for a TV" on page 90 to ensure that the
computer recognizes and works properly with the TV.
Component Video and Standard Audio
1
1
84
S-video TV-out connector
Using Multimedia
2
2
component video adapter
1
2
3
1
component video adapter
3
standard audio cable
2
component video adapter
1 Turn off the computer and the TV and/or audio device that you want to
connect.
2 Connect the component video adapter to the S-video TV-out connector on
your computer.
3 Plug all three ends of the component video cable into the component
video-output connectors on the component video adapter. Make sure that
the red, green, and blue colors of the cable match the corresponding
adapter ports.
Using Multimedia
85
1
1
component video adapter
2
2
component video adapter
4 Plug all three connectors from the other end of the component video cable
into the component video-input connectors on the TV. Make sure that the
red, green, and blue colors of the cable match the colors of the TV input
connectors.
5 Plug the single-connector end of the audio cable into the headphone
connector on the computer.
6 Plug the two RCA connectors on the other end of the audio cable into the
audio input connectors on your TV or audio device.
7 Turn on the TV, turn on any audio device that you connected (if
applicable), and then turn on the computer.
8 See "Enabling the Display Settings for a TV" on page 90 to ensure that the
computer recognizes and works properly with the TV.
86
Using Multimedia
Component Video and S/PDIF Digital Audio
1
1
S-video TV-out connector
2
2
composite video cable
Using Multimedia
87
1
2
3
1
component video adapter
3
standard audio cable
2
composite video cable
1 Turn off the computer and the TV and/or audio device that you want to
connect.
2 Connect the component video adapter to the S-video TV-out connector on
the computer.
3 Plug all three ends of the component video cable into the component
video-output connectors on the component video adapter. Make sure that
the red, green, and blue colors of the cable match the corresponding
adapter ports.
88
Using Multimedia
2
1
1
component video adapter
3
component video cable
2
3
component video-output connectors
4 Plug all three connectors from the other end of the component video cable
into the component video-input connectors on the TV. Make sure that the
red, green, and blue colors of the cable match the colors of the TV input
connectors.
5 Plug one end of the S/PDIF digital audio cable into the S/PDIF audio
connector on the component video adapter.
1
2
1
component video adapter
2
S/PDIF digital audio cable
6 Plug the other end of the digital audio cable into the S/PDIF input
connector on your TV or other audio device.
7 Turn on the TV, turn on any audio device that you connected (if
applicable), and then turn on the computer.
8 See "Enabling the Display Settings for a TV" on page 90 to ensure that the
computer recognizes and works properly with the TV.
Using Multimedia
89
Enabling S/PDIF Digital Audio
1 Double-click the speaker icon in the Windows notification area.
2 Click the Options menu and then click Advanced Controls.
3 Click Advanced.
4 Click S/PDIF Interface.
5 Click Close.
6 Click OK.
Enabling the Display Settings for a TV
NOTE: To ensure that the display options appear correctly, connect the TV to the
computer before you enable the display settings.
1 Click Start
, click Control Panel, and then click Appearance and
Personalization.
2 Under Personalization, click Adjust Screen Resolution.
The Display Properties window appears.
3 Click Advanced.
4 Click the tab for your video card.
NOTE: To determine the type of video card installed in your computer, see
в†’ Help
Windows Help and Support. To access Help and Support, click Start
and Support. Under Pick a Task, click Use Tools to view your computer information
and diagnose problems. Then, under My Computer Information, select Hardware.
5 In the display devices section, select the appropriate option for using
either a single display or multiple displays, ensuring that the display
settings are correct for your selection.
90
Using Multimedia
8
Using ExpressCards
ExpressCards provide additional memory, wired and wireless
communications, multimedia and security features. For example, you can add
an ExpressCard to make wireless wide area network (WWAN) connectivity
available on your computer.
ExpressCards support two form factors:
вЂў
ExpressCard/34 (34 mm wide)
вЂў
ExpressCard/54 (54 mm wide in an L-shape with a 34-mm connector)
The 34-mm card fits into both the 34-mm and 54-mm card slots. The 54-mm
card only fits into a 54-mm card slot.
See "Specifications" on page 205 for information on supported ExpressCards.
NOTE: An ExpressCard is not a bootable device.
1
1
ExpressCard/34
2
2
ExpressCard/54
ExpressCard Blanks
Your computer shipped with a plastic blank installed in the ExpressCard slot.
Blanks protect unused slots from dust and other particles. Save the blank for
use when no ExpressCard is installed in the slot; blanks from other computers
may not fit your computer.
Using ExpressCards
91
Remove the blank before installing an ExpressCard. To remove the blank, see
"Removing an ExpressCard or Blank" on page 93.
Installing an ExpressCard
You can install an ExpressCard while the computer is running. The computer
automatically detects the card.
ExpressCards are generally marked with a symbol (such as a triangle or an
arrow) or a label to indicate which end to insert into the slot. The cards are
keyed to prevent incorrect insertion. If card orientation is not clear, see the
documentation that came with the card.
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
To install an ExpressCard:
1 Hold the card with the top side of the card facing up.
2 Slide the card into the slot until the card is completely seated in its
connector.
If you encounter too much resistance, do not force the card. Check the
card orientation and try again.
1
1
92
slot
2
Using ExpressCards
2
ExpressCard
The computer recognizes the ExpressCard and automatically loads the
appropriate device driver. If the configuration program tells you to load the
manufacturer's drivers, use the media that came with the ExpressCard.
Removing an ExpressCard or Blank
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
Press the release latch and remove the card or blank. For some release latches,
you must press the latch twice, once to pop the latch out, and then a second
time to pop the card out.
Save a blank to use when no ExpressCard is installed in a slot. Blanks protect
unused slots from dust and other particles.
1
1
release latch
Using ExpressCards
93
94
Using ExpressCards
Using the Memory Card Reader
9
The memory card reader provides a fast and convenient way to view and share
digital photos, music, and videos stored on a memory card.
NOTE: A memory card is not a bootable device.
The 8-in-1 memory card reader reads the following memory cards:
вЂў
Secure Digital (SD)
вЂў
SDIO
вЂў
MultiMediaCard (MMC)
вЂў
Memory Stick
вЂў
Memory Stick PRO
вЂў
xD-Picture Card
вЂў
Hi Speed-SD
вЂў
Hi Density-SD
Memory Card Blanks
Your computer shipped with a plastic blank installed in the 8-in-1 memory
card reader. Blanks protect unused slots from dust and other particles. Save
the blank for use when no memory card is installed in the slot; blanks from
other computers may not fit your computer.
Remove the blank before installing a memory card. To remove the blank, see
"Removing a Memory Card or Blank" on page 96.
Installing a Memory Card
You can install a memory card in the computer while the computer is
running. The computer automatically detects the card.
Memory cards are generally marked with a symbol (such as a triangle or an
arrow) or a label to indicate which end to insert into the slot. The cards are
keyed to prevent incorrect insertion. If card orientation is not clear, see the
documentation that came with the card.
Using the Memory Card Reader
95
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
To install a memory card:
1 Hold the card with the top side of the card facing up.
2 Slide the card into the slot until the card is completely seated in its
connector.
If you encounter too much resistance, do not force the card. Check the
card orientation and try again.
The computer recognizes the memory card and automatically loads the
appropriate device driver. If the configuration program tells you to load the
manufacturer's drivers, use the media that came with the memory card, if
applicable.
Removing a Memory Card or Blank
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE: Use the memory card configuration utility (click the
icon in the
notification area) to select a card and stop it from functioning before you remove it
from the computer. If you do not stop the card in the configuration utility, you could
lose data.
Press the card into the slot to release it from the card reader. When it is
partially ejected, remove the card.
96
Using the Memory Card Reader
10
Setting Up and Using Networks
A computer network provides connectivity between your computer and the
Internet, another computer, or a network. For example, with a network set up
in a home or small office you can print to a shared printer, access drives and
files on another computer, browse other networks, or access the Internet. You
can set up a local area network (LAN) using a network or broadband modem
cable or set up a wireless LAN (WLAN).
The MicrosoftВ® WindowsВ® XP and Microsoft Windows Vistaв„ў operating
systems provide wizards to help guide you through the process of networking
computers. For more information about Networking, see the Windows Help
and Support Center (see "Microsoft Windows XP and Windows Vistaв„ў Help
and Support Center" on page 16).
Connecting a Network or Broadband Modem
Cable
Before you connect your computer to a network, the computer must have a
network adapter installed and a network cable connected to it.
1 Connect the network cable to the network adapter connector on the right
side of your computer.
NOTE: Insert the cable connector until it clicks into place, and then gently
pull on the cable to ensure that it is securely attached.
2 Connect the other end of the network cable to a network connection
device or a network wall connector.
NOTE: Do not use a network cable with a telephone wall connector.
Setting Up and Using Networks
97
Setting Up a Network
Windows XP
1 Click Startв†’ All Programsв†’ Accessoriesв†’ Communicationsв†’ Network
Setup Wizardв†’ Nextв†’ Checklist for creating a network.
NOTE: Selecting the connection method labeled This computer connects
directly to the Internet enables the integrated firewall provided with
Windows XP Service Pack 2 (SP2).
2 Complete the checklist.
3 Return to the Network Setup Wizard and follow the instructions in the
wizard.
Windows Vista
1 Click the Windows Vista Start button
Set up a connection or network.
, and then click Connect Toв†’
2 Select an option under Choose a connection option.
3 Click Next, and then follow the instructions in the wizard.
98
Setting Up and Using Networks
Wireless Local Area Network
A wireless local area network (WLAN) is a series of interconnected computers
that communicate with each other over the air waves rather than through a
network cable connected to each computer. In a WLAN, a radio
communications device called an access point or wireless router connects
network computers and provides Internet, or network access. The access
point or wireless router and the wireless network card in the computer
communicate by broadcasting data from their antennas over the air waves.
What You Need to Establish a WLAN Connection
Before you can set up a WLAN, you need:
вЂў
High-speed (broadband) Internet access (such as cable or DSL)
вЂў
A broadband modem that is connected and working
вЂў
A wireless router or access point
вЂў
A wireless network card for each computer that you want to connect to
your WLAN
вЂў
A network cable with a network (RJ-45) connector
Checking Your Wireless Network Card
Depending on what you selected when you purchased your computer, the
computer has a variety of configurations. To confirm that your computer has
a wireless network card and to determine the type of card, use one of the
following:
вЂў
The Start button and the Connect To option
вЂў
The order confirmation for your computer
Start Button and Connect To Option
In Microsoft Windows XP, click Startв†’ Connect Toв†’ Show all connections.
NOTE: If your computer is set to the Classic Start menu option, click Startв†’
Settingsв†’ Network Connections to view your network connections.
In Microsoft Windows Vista, click
computers and devices.
в†’ Connect Toв†’ View network
Setting Up and Using Networks
99
If Wireless Network Connection does not appear under LAN or High-Speed
Internet, you may not have a wireless network card.
If Wireless Network Connection appears, you have a wireless network card. To
view detailed information about the wireless network card:
1 Right-click Wireless Network Connection.
2 Click Properties.
The Wireless Network Connection Properties window appears. The
wireless network cardвЂ™s name and model number are listed on the
General tab.
NOTE: If Wireless Network Connection does not appear, you may not have a
wireless network card.
The Order Confirmation for Your Computer
The order confirmation that you received when you ordered your computer
lists the hardware and software that shipped with your computer.
Setting Up a New WLAN Using a Wireless Router and a Broadband
Modem
1 Contact your Internet service provider (ISP) to obtain specific information
about the connection requirements for your broadband modem.
2 Ensure that you have wired Internet access through your broadband
modem before you attempt to set up a wireless Internet connection (see
"Connecting a Network or Broadband Modem Cable" on page 97).
3 Install any software required for your wireless router. Your wireless router
may have been shipped with installation media. Installation media usually
contains installation and troubleshooting information. Install the required
software according to the instructions provided by the router
manufacturer.
4 Shut down your computer and any other wireless-enabled computers in
the vicinity.
5 Disconnect your broadband modem power cable from the electrical outlet.
6 Disconnect the network cable from the computer and the modem.
7 Disconnect the AC adapter cable from your wireless router to ensure that
there is no power connected to the router.
100
Setting Up and Using Networks
NOTE: Wait for a minimum of 5 minutes after disconnecting your broadband
modem before continuing with the network setup.
8 Insert a network cable into the network (RJ-45) connector on the
unpowered broadband modem.
9 Connect the other end of the network cable into the Internet network
(RJ-45) connector on the unpowered wireless router.
10 Ensure that no network or USB cables, other than the network cable
connecting the modem and the wireless router, are connected to the
broadband modem.
NOTE: Restart your wireless equipment in the order described below to prevent a
potential connection failure.
11 Turn on only your broadband modem and wait for at least 2 minutes for
the broadband modem to stabilize. After 2 minutes, proceed to step 12.
12 Turn on your wireless router and wait for at least 2 minutes for the wireless
router to stabilize. After 2 minutes, proceed to the step 13.
13 Start your computer and wait until the boot process completes.
14 See the documentation that came with your wireless router to do the
following in order to set up the wireless router:
вЂў
Establish communication between your computer and your wireless
router.
вЂў
Configure your wireless router to communicate with your broadband
router.
вЂў
Find out your wireless routerвЂ™s broadcast name. The technical term for
the name of your routerвЂ™s broadcast name is Service Set Identifier
(SSID) or network name.
15 If necessary, configure your wireless network card to connect to the wireless
network (see "Connecting to a WLAN" on page 101).
Connecting to a WLAN
NOTE: Before you connect to a WLAN, ensure that you have followed the
instructions in "Wireless Local Area Network" on page 99.
NOTE: The following networking instructions do not apply to internal cards with
BluetoothВ® wireless technology or cellular products.
Setting Up and Using Networks
101
This section provides general procedures for connecting to a network using
wireless technology. Specific network names and configuration details vary.
See "Wireless Local Area Network" on page 99 for more information about
how to prepare for connecting your computer to a WLAN.
Your wireless network card requires specific software and drivers for
connecting to a network. The software is already installed.
NOTE: If the software is removed or corrupted, follow the instructions in the user
documentation for your wireless network card. Verify the type of wireless network
card installed in your computer and then search for that name on the Dellв„ў Support
website at support.dell.com. For information on the type of wireless network card
that is installed in your computer, see "Checking Your Wireless Network Card" on
page 99.
When you turn on your computer, and a network for which your computer is
not configured is detected in the area, a pop-up appears near the network icon
in the Windows notification area.
Determining the Wireless Network Device Manager
Depending on the software installed on your computer, different wireless
configuration utilities may manage your network devices:
вЂў
Your wireless network cardвЂ™s client utility
вЂў
The Windows XP or Windows Vista operating system
To determine which wireless configuration utility is managing your wireless
network card in Windows XP:
1 Click Startв†’ Settingsв†’ Control Panelв†’ Network Connections.
2 Right-click the Wireless Network Connection icon, and then click View
Available Wireless Networks.
If the Choose a wireless network window states Windows cannot configure
this connection, the wireless network cardвЂ™s client utility is managing the
wireless network card.
If the Choose a wireless network window states Click an item in the list
below to connect to a wireless network in range or to get more information,
the Windows XP operating system is managing the wireless network card.
102
Setting Up and Using Networks
To determine which wireless configuration utility is managing your wireless
network card in Windows Vista:
1 Click
в†’ Connect Toв†’ Manage wireless networks.
2 Double-click a profile to open the wireless network properties screen.
For specific information about the wireless configuration utility installed on
your computer, see your wireless network documentation in the Windows
Help and Support Center (see "Microsoft Windows XP and Windows Vistaв„ў
Help and Support Center" on page 16).
Completing the Connection to the WLAN
When you turn on your computer and a network (for which your computer is
not configured) is detected in the area, a pop-up appears near the network
icon in the notification area (in the lower-right corner of the Windows
desktop).
Follow the instructions provided in any utility prompts that appear on your
screen.
Once you have configured your computer for the wireless network that you
selected, another pop-up notifies you that your computer is connected to that
network.
Thereafter, whenever you log on to your computer within the range of the
wireless network that you selected, the same pop-up notifies you of the
wireless network connection.
NOTE: If you select a secure network, you must enter a WEP or WPA key when
prompted. Network security settings are unique to your network. Dell cannot
provide this information.
NOTE: Your computer can take up to 1 minute to connect to the network.
Monitoring the Status of the Wireless Network Card Through Dell QuickSet
The wireless activity indicator provides you with an easy way to monitor the
status of your computerвЂ™s wireless devices. To turn the wireless activity
indicator on or off, click the QuickSet icon in the taskbar and select Hotkey
Popups. If Wireless Activity Indicator Off is not checked, the indicator is on.
If Wireless Activity Indicator Off is checked, the indicator is off.
Setting Up and Using Networks
103
The wireless activity indicator displays whether your computerвЂ™s integrated
wireless devices are enabled or disabled. When you turn the wireless
networking function on or off, the wireless activity indicator changes to
display the status.
For more information about the Dell QuickSet wireless activity indicator,
right-click the QuickSet icon in the taskbar, and then select Help.
Mobile Broadband (or Wireless Wide Area
Network)
A Mobile Broadband network, also known as a Wireless Wide Area Network
(WWAN), is a high-speed digital cellular network that provides Internet
access over a much wider geographical area than a WLAN, which typically
covers only from 100 to 1000 feet. Your computer can maintain Mobile
Broadband network access as long as the computer is within a cellular-data
coverage zone. Contact your service provider for coverage of a high-speed
digital cellular network.
NOTE: Even if you are able to make a call from your cellular phone in a specific
geographical location, that location may not necessarily be within a cellular-data
coverage zone.
What You Need to Establish a Mobile Broadband Network Connection
NOTE: Depending on your computer, you can use either a Mobile Broadband
ExpressCard or Mini-Card, but not both, to establish a Mobile Broadband network
connection.
To set up a Mobile Broadband network connection, you need:
вЂў
A Mobile Broadband ExpressCard or Mini-Card (depending on your
computerвЂ™s configuration)
NOTE: For instructions on using ExpressCards, see "Using ExpressCards" on
page 91.
вЂў
104
An activated Mobile Broadband ExpressCard or activated Subscriber
Identity Module (SIM) for your service provider
Setting Up and Using Networks
вЂў
The Dell Mobile Broadband Card Utility (already installed on your
computer if you purchased the card when you purchased your computer, or
on the media that accompanied your card if purchased separately from
your computer)
If the utility is corrupted or deleted from your computer, see the Dell
Mobile Broadband Card Utility userвЂ™s guide in Windows Help and
Support Center (see "Microsoft Windows XP and Windows Vistaв„ў Help
and Support Center" on page 16) or on the media that accompanied your
card if you purchased it separately from your computer.
Checking Your Dell Mobile Broadband Card
Depending on what you selected when you purchased your computer, the
computer has a variety of configurations. To determine your computer
configuration, see one of the following:
вЂў
Your order confirmation
вЂў
Microsoft Windows Help and Support Center
To check your Mobile Broadband card in the Windows Help and Support
Center:
1 Click Startв†’ Help and Supportв†’ Use Tools to view your computer
information and diagnose problems.
2 Under Tools, click My Computer Informationв†’ Find information about
the hardware installed on this computer.
On the My Computer Information - Hardware screen, you can view the type
of Mobile Broadband card installed in your computer as well as other
hardware components.
NOTE: The Mobile Broadband card is listed under Modems.
Connecting to a Mobile Broadband Network
NOTE: These instructions only apply to Mobile Broadband ExpressCards or MiniCards. They do not apply to internal cards with wireless technology.
Setting Up and Using Networks
105
NOTE: Before you connect to the Internet, you must activate Mobile Broadband
service through your cellular service provider. For instructions and for additional
information about using the Dell Mobile Broadband Card Utility, see the user's guide
available through the Windows Help and Support Center ("Microsoft Windows XP
and Windows Vistaв„ў Help and Support Center" on page 16). The user's guide is also
available on the Dell Support website at support.dell.com and on the CD included
with your Mobile Broadband card if you purchased the card separately from your
computer.
Use the Dell Mobile Broadband Card Utility to establish and manage a
Mobile Broadband network connection to the Internet:
1 Click the Dell Mobile Broadband Card Utility icon
desktop, to run the utility.
on the Windows
2 Click Connect.
NOTE: The Connect button changes to the Disconnect button.
3 Follow the instructions on the screen to manage the network connection
with the utility.
or
1 Click Startв†’ All Programsв†’ Dell Wireless.
2 Click Dell Wireless Broadband and follow the instructions on the screen.
Enabling/Disabling the Dell Mobile Broadband Card
NOTE: If you are unable to connect to a Mobile Broadband network, ensure that
you have all the components for establishing a Mobile Broadband connection (see
"What You Need to Establish a Mobile Broadband Network Connection" on
page 104), and then verify that your Mobile Broadband card is enabled by verifying
the setting of the wireless switch.
You can turn your Mobile Broadband card on and off using the wireless switch
on your computer.
You can turn your computerвЂ™s wireless devices on and off with the wireless
switch on the left side of the computer (see "Left Side View" on page 27).
If the switch is in the on position, move the switch to the off position to
disable the switch and the Mobile Broadband card. If the switch is in the off
position, move the switch to the on position to enable the switch and the Dell
Mobile Broadband card. For information about the wireless switch positions,
see "wireless switch" on page 27.
106
Setting Up and Using Networks
To monitor the status of your wireless device, see "Monitoring the Status of
the Wireless Network Card Through Dell QuickSet" on page 103.
Dell Wi-Fi Catcherв„ў Network Locator
NOTE: The Wi-Fi Catcher Network Locator light appears only when the computer is
turned off and the wireless switch is configured in the system setup program (BIOS)
to control WiFi network connections.
The wireless switch on your Dell computer uses the Dell Wi-Fi Catcher
Network Locator to scan specifically for wireless networks in your vicinity.
To scan for a wireless network, slide and hold the wireless switch (see "wireless
switch" on page 27) in the momentary position for a few seconds. The Wi-Fi
Catcher Network Locator functions regardless of whether your computer is
turned on or off, in hibernate mode, in standby mode, or in Sleep state, as
long as the switch is configured through Dell QuickSet or the BIOS (system
setup program) to control WiFi network connections.
Because the Wi-Fi Catcher Network Locator is disabled and not configured
for use when your computer is shipped to you, you must first use Dell
QuickSet to enable and configure the switch to control WiFi network
connections.
For more information on the Wi-Fi Catcher Network Locator and to enable
the feature through Dell QuickSet, right-click the QuickSet icon in the
taskbar and select Help.
Setting Up and Using Networks
107
108
Setting Up and Using Networks
Securing Your Computer
11
Security Cable Lock
NOTE: Your computer does not ship with a security cable lock.
A security cable lock is a commercially available antitheft device. To use the
lock, attach it to the security cable slot on your Dell computer. For more
information, see the instructions included with the device.
NOTICE: Before you buy an antitheft device, ensure that it will work with the
security cable slot on your computer.
Passwords
Passwords prevent unauthorized access to your computer. When you first
start your computer, you must assign a primary password at the prompt. If you
do not enter a password within 2 minutes, the computer returns to its
previous operating state.
Securing Your Computer
109
When using passwords, observe the following guidelines:
вЂў
Choose a password that you can remember, but not one that is easy to
guess. For example, do not use the names of family members or pets for
passwords.
вЂў
It is recommended that you do not write down your password. If you do
write it down, however, ensure that the password is stored in a secure
location.
вЂў
Do not share your password with other people.
вЂў
Ensure that people are not watching you when you type your password.
NOTICE: Passwords provide a high level of security for data in your computer or
hard drive. However, they are not foolproof. If you require more security, obtain and
use additional forms of protection such as data encryption programs.
Use the User Accounts option in the Control Panel in the MicrosoftВ®
WindowsВ® operating system to create user accounts or to change passwords.
Once you create a user password, you must enter it each time you turn on or
unlock your computer. If you do not enter a password within 2 minutes, the
computer returns to its previous operating state. For more information, see
your Windows documentation.
If you forget any of your passwords, contact Dell (see "Contacting Dell" on
page 203). For your protection, Dell technical support staff will ask you for
proof of your identity to ensure that only an authorized person can use the
computer.
If Your Computer Is Lost or Stolen
вЂў
Call a law enforcement agency to report the lost or stolen computer.
Include the Service Tag in your description of the computer. Ask that a
case number be assigned and write down the number, along with the
name, address, and phone number of the law enforcement agency. If
possible, obtain the name of the investigating officer.
NOTE: If you know where the computer was lost or stolen, call a law enforcement
agency in that area. If you do not know, call a law enforcement agency where
you live.
вЂў
110
If the computer belongs to a company, notify the security office of the
company.
Securing Your Computer
вЂў
Contact Dell customer service to report the missing computer. Provide the
computer Service Tag, the case number, and the name, address, and phone
number of the law enforcement agency to which you reported the missing
computer. If possible, give the name of the investigating officer.
The Dell customer service representative will log your report under the
computer Service Tag and record the computer as missing or stolen. If
someone calls Dell for technical assistance and gives your Service Tag, the
computer is identified automatically as missing or stolen. The representative
will attempt to get the phone number and address of the caller. Dell will then
contact the law enforcement agency to which you reported the missing
computer.
Securing Your Computer
111
112
Securing Your Computer
12
Troubleshooting
Dell Technical Update Service
The Dell Technical Update service provides proactive e-mail notification of
software and hardware updates for your computer. The service is free and can
be customized for content, format, and how frequently you receive
notifications.
To enroll for the Dell Technical Update service, go to
support.dell.com/technicalupdate.
Dell Diagnostics
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
When to Use the Dell Diagnostics
If you experience a problem with your computer, perform the checks in
"Lockups and Software Problems" on page 133 and run the Dell Diagnostics
before you contact Dell for technical assistance.
It is recommended that you print these procedures before you begin.
NOTE: The Dell Diagnostics only operates on Dell computers.
Enter the system setup program, review your computerвЂ™s configuration
information, and ensure that the device you want to test displays in the
system setup program and is active (see "Using the System Setup Program" on
page 215).
Start the Dell Diagnostics from your hard drive or from your Drivers and
Utilities media (see "Drivers and Utilities Media" on page 15).
Starting the Dell Diagnostics From Your Hard Drive
The Dell Diagnostics is located on a hidden diagnostic utility partition on
your hard drive.
Troubleshooting
113
NOTE: If your computer cannot display a screen image, see "Contacting Dell" on
page 203.
1 Ensure that the computer is connected to an electrical outlet that is
known to be working properly.
2 Turn on (or restart) your computer.
3 Start the Dell Diagnostics in one of the following two ways.
NOTE: If you wait too long and the operating system logo appears, continue
to wait until you see the MicrosoftВ® WindowsВ® desktop; then, shut down your
computer and try again.
вЂ“
When the DELLв„ў logo appears, press <F12> immediately. Select
Diagnostics from the boot menu and press <Enter>.
NOTE: Before attempting the following option, the computer must be
powered down completely.
вЂ“
Press and hold the <Fn> key while powering the computer on.
NOTE: If you see a message stating that no diagnostics utility partition has
been found, run the Dell Diagnostics from the Drivers and Utilities media.
The computer runs the Pre-boot System Assessment (PSA), a series of
initial tests of your system board, keyboard, display, memory, and hard
drive.
вЂў
During the assessment, answer any questions that appear.
вЂў
If failures are detected, the computer stops and beeps. To stop the
assessment and restart the computer, press <n>; to continue to the
next test, press <y>; to retest the component that failed, press <r>.
вЂў
If failures are detected during the Pre-boot System Assessment, write
down the error codes and contact Dell (see "Contacting Dell" on
page 203).
If the Pre-boot System Assessment completes successfully, you receive the
message Booting Dell Diagnostic Utility Partition.
Press any key to continue.
4 Press any key to start the Dell Diagnostics from the diagnostics utility
partition on your hard drive.
114
Troubleshooting
Starting the Dell Diagnostics From the Drivers and Utilities Media
1 Insert your Drivers and Utilities media.
2 Shut down and restart the computer.
When the DELL logo appears, press <F12> immediately.
NOTE: If you wait too long and the operating system logo appears, continue
to wait until you see the Microsoft Windows desktop; then, shut down your
computer and try again.
NOTE: The next steps change the boot sequence for one time only. On the
next start-up, the computer boots according to the devices specified in the
system setup program.
NOTE: Keyboard failure may result when a key on the keyboard is held down
for extended periods of time. To avoid possible keyboard failure, press and
release the <F12> key in even intervals until the boot device menu appears.
3 At the boot device menu, use the up- and down-arrow keys to highlight
CD/DVD/CD-RW, and then press <Enter>.
NOTE: The Quickboot feature changes the boot sequence for the current
boot only. Upon restart, the computer boots according to the boot sequence
specified in the system setup program.
4 Select the Boot from CD-ROM option from the menu that appears and
then press <Enter>.
5 Type 1 to start the Drivers and Utilities menu and then press <Enter>.
6 Select Run the 32 Bit Dell Diagnostics from the numbered list. If
multiple versions are listed, select the version appropriate for your
computer.
7 At the Dell Diagnostics Main Menu, select the test you want to run.
NOTE: Write down any error codes and problem descriptions exactly as they
appear and follow the instructions on the screen.
8 After all tests have completed, close the test window to return to the Dell
Diagnostics Main Menu.
9 Remove your Drivers and Utilities media and then close the Main Menu
window to exit the Dell Diagnostics and restart the computer.
Troubleshooting
115
Dell Diagnostics Main Menu
After the Dell Diagnostics loads and the Main Menu screen appears, click the
button for the option you want.
NOTE: It is recommended that you select Test System to run a complete test
on your computer.
Option
Function
Test Memory
Run the stand-alone memory test
Test System
Run System Diagnostics
Exit
Exit the Diagnostics
After you have selected the Test System option from the main menu, the
following menu appears.
NOTE: It is recommended that you select Extended Test from the menu to
run a more thorough check of the devices in the computer.
Option
Function
Express Test
Performs a quick test of system
devices. The test typically takes 10 to
20 minutes and requires no interaction
on your part. Run Express Test first to
increase the possibility of tracing the
problem quickly.
Extended Test
Performs a thorough check of system
devices. The test typically takes an
hour or more and periodically requires
your input to answer specific
questions.
Custom Test
Tests a specific device in the system
and can be used to customize the tests
you want to run.
Symptom Tree
Lists a number of common symptoms and
allows you to select a test based on the
symptom of the problem you are having.
116
Troubleshooting
For any problem encountered during a test, a message appears with an error
code and a description of the problem. Write down the error code and
problem description exactly as it appears and follow the instructions on the
screen. If you cannot resolve the problem, contact Dell (see "Contacting Dell"
on page 203).
NOTE: The Service Tag for your computer is located at the top of each test screen.
When contacting Dell support, have your Service Tag ready.
The following tabs provide additional information for tests run from the
Custom Test or Symptom Tree option:
Tab
Function
Results
Displays the results of the test and any
error conditions encountered.
Errors
Displays error conditions encountered,
error codes, and the problem
description.
Help
Describes the test and any requirements
for running the test.
Configuration
Displays your hardware configuration
for the selected device.
The Dell Diagnostics obtains
configuration information for all
devices from the system setup program,
memory, and various internal tests, and
it displays the information in the
device list in the left pane of the
screen. The device list may not display
the names of all the components
installed on your computer or all
devices attached to your computer.
Parameters
Allows you to customize the test by
changing the test settings.
Troubleshooting
117
Dell Support Center
The Dell Support Center provides service, support, and system-specific
information. For more information about Dell Support Center and available
support tools, click the Services tab at support.dell.com.
Computers purchased on June 26, 2007 and later are pre-installed with Dell
Support Center.
For computers purchased prior to June 26, 2007 you can download Dell
Support Center from the Services page at support.dell.com.
Click the Dell Support Center icon
on your computerвЂ™s desktop to run
the application and to access the following features:
вЂў
Self-help tools such as Dell Support, Dell PC TuneUp, Dell PC Checkup,
and Network Assistant
вЂў
DellConnect for remote, real-time, technical support
вЂў
Dell support contact information including e-mail and online chat
addresses as well as telephone numbers
вЂў
Resources specific to your computer are available under Drivers &
Downloads Upgrades and System Information
The top of the Dell Support Center home page displays your computerвЂ™s
model number along with its Service Tag, Express Service code, and warranty
expiration details. When permissions are given to Dell to use your Service
Tag, additional details about your computer, such as available memory, disk
space, installed hardware, network addresses, modem specifications, installed
security software, and much more are provided. In addition, using your
Service Tag, Dell can link you to the most relevant www.dell.com web pages
for information about your warranty, ordering accessories, and details about
installing recommended drivers and downloads.
Dell Support
Dell Support is customized for your computing environment. This utility
provides self-support information, software updates, and health scans for your
computer. Use this utility for following functions:
118
вЂў
Check your computing environment.
вЂў
View the Dell Support settings.
вЂў
Access the Dell Support help file.
Troubleshooting
вЂў
View frequently asked questions.
вЂў
Learn more about Dell Support.
вЂў
Turn Dell Support off.
For more information about Dell Support, click the question mark (?) at the
top of the Dell Support window.
To access Dell Support:
вЂў
Click the Dell Support icon
desktop.
in the notification area of your Windows
NOTE: The
icon functions vary depending on whether you click, doubleclick, or right-click the icon.
OR
вЂў
Click the Start button
в†’ All Programsв†’ Dell Supportв†’ Dell
Support Settings. Ensure that the Show icon on the taskbar option is
checked.
NOTE: If Dell Support is not available from the Start menu, go to
support.dell.com and download the software.
Dell PC TuneUp
The automated or monthly version of Dell PC TuneUp allows you to choose
the day and time of the month you want your computer "tuned up." A typical
tune-up includes hard drive defragmentation, removal of unwanted and
temporary files, updated security settings, verification of "good" restore
points, and other maintenance activities designed to improve computer
performance and security. The monthly version is available as an annual
subscription and is a feature of Dell Support, a complimentary application
that provides real-time health scans and information on how to maintain your
computer (see "Dell Support" on page 118).
Both versions of PC TuneUp are available to customers in the U.S. and
Canada. For the latest updates and to learn how to keep your computer
running at peak performance, search for the keyword PC TuneUp on
support.dell.com.
Troubleshooting
119
Dell PC Checkup
Dell PC Checkup is a troubleshooting and diagnostic tool that provides
customized scanning and testing of your Dell computer. PC Checkup verifies
whether your hardware is working properly and provides automated fixes for
common configuration concerns. It is recommended that you run PC
Checkup on a regular basis or before contacting Dell for assistance. The
application creates a detailed report that Dell technicians can use to resolve
your issue quickly.
Dell Network Assistant
Designed specifically for users of Dellв„ў computers, the Dell Network
Assistant helps simplify the setup, monitoring, troubleshooting, and repair of
your network.
Dell Network Assistant provides the following features:
вЂў
Consolidated setup, alerting, and device status
вЂў
Simplified tracking of networked devices through a visual display of
network status
вЂў
Proactive troubleshooting and repair of network problems
вЂў
Tutorials, setup wizards, and frequently asked questions (FAQs) to
enhance understanding of networking principles
To access Dell Network Assistant:
1 Click the Dell Support Center icon
on your computerвЂ™s desktop.
2 Click Self Helpв†’ Network /Internetв†’ Network Management.
DellConnect
DellConnect is a simple online access tool that allows a Dell service and
support associate to access your computer through an Internet connection,
diagnose the problem, and repair it. The associate works with your permission
under your supervision, and you can work with DellвЂ™s associate during the
troubleshooting session.
To use this service, you must have an Internet connection and your Dell
computer must be under warranty. DellConnect is also available for a fee
through "Dell On Call."
120
Troubleshooting
To begin a live session with a Dell associate:
1 Click the Dell Support Center icon
on your computerвЂ™s desktop.
2 Click Assistance From Dellв†’ Technical Supportв†’ DellConnectв†’
Phone and follow the instructions.
Drive Problems
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
ENSURE THAT MICROSOFT WINDOWS RECOGNIZES THE DRIVE вЂ”
Windows XP:
вЂў
Click Start and click My Computer.
Windows VistaВ®:
вЂў
Click the Windows Vista Start button
and click Computer.
If the drive is not listed, perform a full scan with your antivirus software to
check for and remove viruses. Viruses can sometimes prevent Windows from
recognizing the drive.
TE S T T H E D R I V E вЂ”
вЂў
Insert another floppy disk, CD, or DVD to eliminate the possibility that
the original media is defective.
вЂў
Insert a bootable floppy disk and restart the computer.
C L E A N T H E D R I V E O R D I S K вЂ” See "Cleaning Your Computer" on page 218.
E N S U R E T H A T T H E CD O R DVD M E D I A I S S N A P P E D O N T O T H E S P I N D L E
CHECK THE CABLE CONNECTIONS
C H E C K F O R H A R D W A R E I N C O M P A T I B I L I T I E S вЂ” See "Troubleshooting Software
and Hardware Problems" on page 149.
R U N T H E D E L L D I A G N O S T I C S вЂ” See "Dell Diagnostics" on page 113.
Optical drive problems
NOTE: High-speed optical drive vibration is normal and may cause noise, which
does not indicate a defect in the drive or the media.
NOTE: Because of different regions worldwide and different disc formats, not all
DVD titles work in all DVD drives.
Troubleshooting
121
Problems writing to a CD-RW or DVD+/-RW drive
C L O S E O T H E R P R O G R A M S вЂ” CD-RW and DVD+/-RW drives must receive a
steady stream of data when writing. If the stream is interrupted, an error
occurs. Try closing all programs before you write to the drive.
TU R N O F F S L E E P S T A T E I N W I N D O W S B E F O R E W R I T I N G T O A CD/DVD D I S C вЂ”
See "Power Management Modes" on page 63 for information on sleep modes.
C H A N G E T H E W R I T E S P E E D T O A S L O W E R R A T E вЂ” See the help files for your CD
or DVD creation software.
The drive tray cannot eject
1 Ensure that the computer is shut down.
2 Straighten a paper clip and insert one end into the eject hole at the front
of the drive, then push firmly until the tray is partially ejected.
3 Gently pull out the tray until it stops.
The drive makes an unfamiliar scraping or grinding sound
вЂў
Ensure that the sound is not caused by the program that is running.
вЂў
Ensure that the disc is inserted properly.
Hard drive problems
A L L O W T H E C O M P U T E R T O C O O L B E F O R E T U R N I N G I T O N вЂ” A hot hard drive may
prevent the operating system from starting. Try allowing the computer to
return to room temperature before turning it on.
Windows XP:
1 Click Start and click My Computer.
2 Right-click Local Disk C:.
3 Click Propertiesв†’Toolsв†’ Check Now.
4 Click Scan for and attempt recovery of bad sectors and click Start.
Windows Vista:
1 Click the Windows Vista Start button
2 Right-click Local Disk C:.
122
Troubleshooting
and click Computer.
3 Click Propertiesв†’Toolsв†’ Check Now.
The User Account Control window may appear. If you are an
administrator on the computer, click Continue; otherwise, contact your
administrator to continue the desired action.
4 Follow the instructions on the screen.
E-Mail, Modem, and Internet Problems
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTE: Connect the modem to an analog telephone jack only. The modem does not
operate while it is connected to a digital telephone network.
C H E C K T H E M I C R O S O F T O U T L O O K В® E X P R E S S S E C U R I T Y S E T T I N G S вЂ” If you
cannot open your e-mail attachments:
1 In Outlook Express, click Toolsв†’ Optionsв†’ Security.
2 Click Do not allow attachments to remove the check mark, as needed.
CHECK THE TELEPHONE LINE CONNECTION
CHECK THE TELEPHONE JACK
CONNECT THE MODEM DIRECTLY TO THE TELEPHONE WALL JACK
USE A DIFFERENT TELEPHONE LINE
вЂў
Verify that the telephone line is connected to the jack on the modem (the
jack has either a green label or a connector-shaped icon next to it).
вЂў
Ensure that you hear a click when you insert the telephone line connector
into the modem.
вЂў
Disconnect the telephone line from the modem and connect it to a
telephone, then listen for a dial tone.
вЂў
If you have other telephone devices sharing the line, such as an answering
machine, fax machine, surge protector, or line splitter, then bypass them
and connect the modem directly to the telephone wall jack. If you are
using a line that is 3 m (10 ft) or more in length, try a shorter one.
Troubleshooting
123
RUN THE MODEM HELPER DIAGNOSTICS вЂ”
Windows XP:
1 Click Startв†’ All Programsв†’ Modem Helper.
2 Follow the instructions on the screen to identify and resolve modem
problems. Modem Helper is not available on certain computers.
Windows Vista:
1 Click the Windows Vista Start button
Diagnostic Tool.
в†’ All Programsв†’ Modem
2 Follow the instructions on the screen to identify and resolve modem
problems. Modem diagnostics are not available on all computers.
VE R I F Y T H A T T H E M O D E M I S C O M M U N I C A T I N G W I T H W I N D O W S вЂ”
Windows XP:
1 Click Startв†’ Control Panelв†’ Printers and Other Hardwareв†’ Phone and
Modem Optionsв†’ Modems.
2 Click the COM port for your modemв†’ Propertiesв†’ Diagnosticsв†’ Query
Modem to verify that the modem is communicating with Windows.
If all commands receive responses, the modem is operating properly.
Windows Vista:
1 Click the Windows Vista Start button
в†’ Control Panelв†’ Hardware
and Soundв†’ Phone and Modem Optionsв†’ Modems.
2 Click the COM port for your modemв†’ Propertiesв†’ Diagnosticsв†’
Query Modem to verify that the modem is communicating with
Windows.
If all commands receive responses, the modem is operating properly.
E N S U R E T H A T Y O U A R E C O N N E C T E D T O T H E I N T E R N E T вЂ” Ensure that you have
subscribed to an Internet service provider. With the Outlook Express e-mail
program open, click File. If Work Offline has a check mark next to it, click
the check mark to remove it, and then connect to the Internet. For help,
contact your Internet service provider.
S C A N T H E C O M P U T E R F O R S P Y W A R E вЂ” If you are experiencing slow computer
performance, you frequently receive pop-up advertisements, or you are having
problems connecting to the Internet, your computer might be infected with
spyware. Use an anti-virus program that includes anti-spyware protection
124
Troubleshooting
(your program may require an upgrade) to scan the computer and remove
spyware. For more information, go to support.dell.com and search for the
keyword spyware.
Error Messages
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
If the message is not listed, see the documentation for the operating system
or the program that was running when the message appeared.
A U X I L I A R Y D E V I C E F A I L U R E вЂ” The touch pad or external mouse may be faulty.
For an external mouse, check the cable connection. Enable the Pointing
Device option in the system setup program (see "Using the System Setup
Program" on page 215). If the problem persists, contact Dell (see "Contacting
Dell" on page 203).
B A D C O M M A N D O R F I L E N A M E вЂ” Ensure that you have spelled the command
correctly, put spaces in the proper place, and used the correct pathname.
C A C H E D I S A B L E D D U E T O F A I L U R E вЂ” The primary cache internal to the
microprocessor has failed. Contact Dell (see "Contacting Dell" on page 203).
CD D R I V E C O N T R O L L E R F A I L U R E вЂ” The CD drive does not respond to
commands from the computer (see "Drive Problems" on page 121).
D A T A E R R O R вЂ” The hard drive cannot read the data (see "Drive Problems" on
page 121).
D E C R E A S I N G A V A I L A B L E M E M O R Y вЂ” One or more memory modules may be
faulty or improperly seated. Reinstall the memory modules and, if necessary,
replace them (see "Memory" on page 172).
D I S K C: F A I L E D I N I T I A L I Z A T I O N вЂ” The hard drive failed initialization. Run the
hard drive tests in the Dell Diagnostics (see "Dell Diagnostics" on page 113).
D R I V E N O T R E A D Y вЂ” The operation requires a hard drive in the bay before it
can continue. Install a hard drive in the hard drive bay (see "Hard Drive" on
page 164).
E R R O R R E A D I N G PCMCIA C A R D вЂ” The computer cannot identify the
ExpressCard. Reinsert the card or try another card (see "Using ExpressCards"
on page 91).
Troubleshooting
125
E X T E N D E D M E M O R Y S I Z E H A S C H A N G E D вЂ” The amount of memory recorded in
nonvolatile memory (NVRAM) does not match the memory installed in the
computer. Restart the computer. If the error appears again, contact Dell (see
"Contacting Dell" on page 203).
T H E F I L E B E I N G C O P I E D I S T O O L A R G E F O R T H E D E S T I N A T I O N D R I V E вЂ” The file
that you are trying to copy is too large to fit on the disk, or the disk is full. Try
copying the file to a different disk or use a larger capacity disk.
A FILENAME CANNOT CONTAIN ANY OF THE FOLLOWING CHARACTERS: \ / : * ? вЂњ <
> | вЂ” Do not use these characters in filenames.
G A T E A 20 F A I L U R E вЂ” A memory module may be loose. Reinstall the memory
modules and, if necessary, replace them (see "Memory" on page 172).
G E N E R A L F A I L U R E вЂ” The operating system is unable to carry out the
command. The message is usually followed by specific informationвЂ”for
example, Printer out of paper. Take the appropriate action.
H A R D - D I S K D R I V E C O N F I G U R A T I O N E R R O R вЂ” The computer cannot identify the
drive type. Shut down the computer, remove the hard drive (see "Hard Drive"
on page 164), and boot the computer from a CD. Then, shut down the
computer, reinstall the hard drive, and restart the computer. Run the Hard
Disk Drive tests in the Dell Diagnostics (see "Dell Diagnostics" on page 113).
H A R D - D I S K D R I V E C O N T R O L L E R F A I L U R E 0 вЂ” The hard drive does not respond
to commands from the computer. Shut down the computer, remove the hard
drive (see "Hard Drive" on page 164), and boot the computer from a CD.
Then, shut down the computer, reinstall the hard drive, and restart the
computer. If the problem persists, try another drive. Run the Hard Disk Drive
tests in the Dell Diagnostics (see "Dell Diagnostics" on page 113).
H A R D - D I S K D R I V E F A I L U R E вЂ” The hard drive does not respond to commands
from the computer. Shut down the computer, remove the hard drive (see
"Hard Drive" on page 164), and boot the computer from a CD. Then, shut
down the computer, reinstall the hard drive, and restart the computer. If the
problem persists, try another drive. Run the Hard Disk Drive tests in the Dell
Diagnostics (see "Dell Diagnostics" on page 113).
H A R D - D I S K D R I V E R E A D F A I L U R E вЂ” The hard drive may be defective. Shut
down the computer, remove the hard drive (see "Hard Drive" on page 164),
and boot the computer from a CD. Then, shut down the computer, reinstall
the hard drive, and restart the computer. If the problem persists, try another
drive. Run the Hard Disk Drive tests in the Dell Diagnostics (see "Dell
Diagnostics" on page 113).
126
Troubleshooting
I N S E R T B O O T A B L E M E D I A вЂ” The operating system is trying to boot to
nonbootable media, such as a floppy disk or CD. Insert bootable media.
I N V A L I D C O N F I G U R A T I O N I N F O R M A T I O N - P L E A S E R U N S YS T E M S E T U P
P R O G R A M вЂ” The system configuration information does not match the
hardware configuration. The message is most likely to occur after a memory
module is installed. Correct the appropriate options in the system setup
program (see "Using the System Setup Program" on page 215).
K E Y B O A R D C L O C K L I N E F A I L U R E вЂ” For external keyboards, check the cable
connection. Run the Keyboard Controller test in the Dell Diagnostics (see
"Dell Diagnostics" on page 113).
K E Y B O A R D C O N T R O L L E R F A I L U R E вЂ” For external keyboards, check the cable
connection. Restart the computer, and avoid touching the keyboard or the
mouse during the boot routine. Run the Keyboard Controller test in the Dell
Diagnostics (see "Dell Diagnostics" on page 113).
K E Y B O A R D D A T A L I N E F A I L U R E вЂ” For external keyboards, check the cable
connection. Run the Keyboard Controller test in the Dell Diagnostics (see
"Dell Diagnostics" on page 113).
K E Y B O A R D S T U C K K E Y F A I L U R E вЂ” For external keyboards or keypads, check the
cable connection. Restart the computer, and avoid touching the keyboard or
keys during the boot routine. Run the Stuck Key test in the Dell Diagnostics
(see "Dell Diagnostics" on page 113).
L I C E N S E D C O N T E N T I S N O T A C C E S S I B L E I N M E D I A D I R E C T вЂ” Dell MediaDirectв„ў
cannot verify the Digital Rights Management (DRM) restrictions on the file,
so the file cannot be played (see "Dell MediaDirect problems" on page 134).
MEMORY ADDRESS LINE FAILURE AT ADDRESS, READ VALUE EXPECTING VALUE вЂ”
A memory module may be faulty or improperly seated. Reinstall the memory
modules and, if necessary, replace them (see "Memory" on page 172).
M E M O R Y A L L O C A T I O N E R R O R вЂ” The software you are attempting to run is
conflicting with the operating system, another program, or a utility. Shut
down the computer, wait 30 seconds, and then restart it. Try to run the
program again. If the error message still appears, see the software
documentation.
MEMORY DATA LINE FAILURE AT ADDRESS, READ VALUE EXPECTING VALUE вЂ” A
memory module may be faulty or improperly seated. Reinstall the memory
modules and, if necessary, replace them (see "Memory" on page 172).
Troubleshooting
127
MEMORY DOUBLE WORD LOGIC FAILURE AT ADDRESS, READ VALUE EXPECTING
V A L U E вЂ” A memory module may be faulty or improperly seated. Reinstall the
memory modules and, if necessary, replace them (see "Memory" on page 172).
MEMORY ODD/EVEN LOGIC FAILURE AT ADDRESS, READ VALUE EXPECTING
V A L U E вЂ” A memory module may be faulty or improperly seated. Reinstall the
memory modules and, if necessary, replace them (see "Memory" on page 172).
MEMORY WRITE/READ FAILURE AT ADDRESS, READ VALUE EXPECTING VALUE вЂ” A
memory module may be faulty or improperly seated. Reinstall the memory
modules and, if necessary, replace them (see "Memory" on page 172).
N O B O O T D E V I C E A V A I L A B L E вЂ” The computer cannot find the hard drive. If
the hard drive is your boot device, ensure that the drive is installed, properly
seated, and partitioned as a boot device.
N O B O O T S E C T O R O N H A R D D R I V E вЂ” The operating system may be corrupted.
Contact Dell (see "Contacting Dell" on page 203).
N O T I M E R T I C K I N T E R R U P T вЂ” A chip on the system board may be
malfunctioning. Run the System Set tests in the Dell Diagnostics (see "Dell
Diagnostics" on page 113).
NOT ENOUGH MEMORY OR RESOURCES. EXIT SOME PROGRAMS AND TRY AGAIN вЂ”
You have too many programs open. Close all windows and open the program
that you want to use.
O P E R A T I N G S YS T E M N O T F O U N D вЂ” Reinstall the hard drive (see "Hard Drive"
on page 164). If the problem persists, contact Dell (see "Dell Diagnostics" on
page 113).
O P T I O N A L ROM B A D C H E C K S U M вЂ” The optional ROM has failed. Contact
Dell (see "Dell Diagnostics" on page 113).
A R E Q U I R E D .DLL F I L E W A S N O T F O U N D вЂ” The program that you are trying to
open is missing an essential file. Remove and then reinstall the program.
Windows XP:
1 Click Startв†’ Control Panelв†’ Add or Remove Programsв†’ Programs and
Features.
2 Select the program you want to remove.
3 Click Uninstall.
4 See the program documentation for installation instructions.
128
Troubleshooting
Windows Vista:
1 Click the Windows Vista Start button
Programs and Features.
в†’ Control Panelв†’ Programsв†’
2 Select the program you want to remove.
3 Click Uninstall.
4 See the program documentation for installation instructions.
S E C T O R N O T F O U N D вЂ” The operating system cannot locate a sector on the
hard drive. You may have a defective sector or corrupted FAT on the hard
drive. Run the Windows error-checking utility to check the file structure on
the hard drive. See Windows Help and Support for instructions (click Startв†’
Help and Support). If a large number of sectors are defective, back up the
data (if possible), and then reformat the hard drive.
S E E K E R R O R вЂ” The operating system cannot find a specific track on the hard
drive.
S H U T D O W N F A I L U R E вЂ” A chip on the system board may be malfunctioning.
Run the System Set tests in the Dell Diagnostics (see "Dell Diagnostics" on
page 113).
T I M E - O F - D A Y C L O C K L O S T P O W E R вЂ” System configuration settings are
corrupted. Connect your computer to an electrical outlet to charge the
battery. If the problem persists, try to restore the data by entering the system
setup program, then immediately exit the program (see "Using the System
Setup Program" on page 215). If the message reappears, contact Dell (see
"Contacting Dell" on page 203).
T I M E - O F - D A Y C L O C K S T O P P E D вЂ” The reserve battery that supports the system
configuration settings may require recharging. Connect your computer to an
electrical outlet to charge the battery. If the problem persists, contact Dell
(see "Contacting Dell" on page 203).
T I M E - O F - D A Y N O T S E T - P L E A S E R U N T H E S YS T E M S E T U P P R O G R A M вЂ” The time
or date stored in the system setup program does not match the system clock.
Correct the settings for the Date and Time options (see "Using the System
Setup Program" on page 215).
T I M E R C H I P C O U N T E R 2 F A I L E D вЂ” A chip on the system board may be
malfunctioning. Run the System Set tests in the Dell Diagnostics (see "Dell
Diagnostics" on page 113).
Troubleshooting
129
U N E X P E C T E D I N T E R R U P T I N P R O T E C T E D M O D E вЂ” The keyboard controller may
be malfunctioning, or a memory module may be loose. Run the System
Memory tests and the Keyboard Controller test in the Dell Diagnostics (see
"Dell Diagnostics" on page 113).
X :\ I S N O T A C C E S S I B L E .
drive and try again.
T H E D E V I C E I S N O T R E A D Y вЂ” Insert a disk into the
W A R N I N G : B A T T E R Y I S C R I T I C A L L Y L O W вЂ” The battery is running out of
charge. Replace the battery, or connect the computer to an electrical outlet;
otherwise, activate hibernate mode or shut down the computer.
ExpressCard Problems
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
C H E C K T H E E X P R E S S C A R D вЂ” Ensure that the ExpressCard is properly inserted
into the connector.
C H E C K T H A T T H E C A R D I S R E C O G N I Z E D B Y W I N D O W S вЂ” Double-click the Safely
Remove Hardware icon in the Windows taskbar. Some cards do not support
this feature. If the card supports this Windows feature, the card will be listed.
I F Y O U H A V E P R O B L E M S W I T H A D E L L - P R O V I D E D E X P R E S S C A R D вЂ” Contact Dell
(see "Contacting Dell" on page 203). Also, for Mobile Broadband (WWAN)
ExpressCards, see "Mobile Broadband (Wireless Wide Area Network
[WWAN])" on page 137.
IF YOU HAVE PROBLEMS WITH AN EXPRESSCARD NOT PROVIDED BY DELL вЂ”
Contact the ExpressCard manufacturer.
130
Troubleshooting
IEEE 1394 Device Problems
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
E N S U R E T H A T T H E I E EE 13 94 D E V I C E I S R E C O G N I Z E D B Y W I N D O W S вЂ”
1 Click Startв†’ Control Panelв†’ System and Maintenanceв†’ Device
Manager.
NOTE: The User Account Control window may appear. If you are an
administrator on the computer, click Continue; otherwise, contact your
administrator to continue the desired action.
If your IEEE 1394 device is listed, Windows recognizes the device.
I F Y O U H A V E P R O B L E M S W I T H A D E L L - P R O V I D E D IEEE 1394 D E V I C E вЂ” Contact
Dell or the IEEE 1394 device manufacturer (see "Contacting Dell" on
page 203).
I F Y O U H A V E P R O B L E M S W I T H A N IEEE 1394 D E V I C E N O T P R O V I D E D B Y D E L L вЂ”
Contact Dell or the IEEE 1394 device manufacturer (see "Contacting Dell"
on page 203).
Ensure that the IEEE 1394 device is properly inserted into the connector
Keyboard Problems
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTE: Use the integrated keyboard when running the Dell Diagnostics or the
system setup program. When you attach an external keyboard, the integrated
keyboard remains fully functional.
External Keyboard problems
NOTE: When you attach an external keyboard, the integrated keyboard remains
fully functional.
C H E C K T H E K E Y B O A R D C A B L E вЂ” Shut down the computer, disconnect the
keyboard cable and check it for damage, then firmly reconnect the cable.
If you are using a keyboard extension cable, disconnect it and connect the
keyboard directly to the computer.
Troubleshooting
131
CHECK THE EXTERNAL KEYBOARD вЂ”
1 Shut down the computer, wait 1 minute, and then turn it on again.
2 Verify that the numbers, capitals, and scroll lock lights on the keyboard
blink during the boot routine.
3 From the Windows desktop, click Startв†’ All Programsв†’ Accessoriesв†’
Notepad.
4 Type some characters on the external keyboard and verify that they appear
on the display.
If you cannot verify these steps, you may have a defective external
keyboard.
TO V E R I F Y T H A T T H E P R O B L E M I S W I T H T H E E X T E R N A L K E Y B O A R D , C H E C K T H E
INTEGRATED KEYBOARD вЂ”
1 Shut down the computer.
2 Disconnect the external keyboard.
3 Turn on the computer.
4 From the Windows desktop, click Startв†’ All Programsв†’ Accessoriesв†’
Notepad.
5 Type some characters on the internal keyboard and verify that they appear
on the display.
If the characters appear now, but did not with the external keyboard, you
may have a defective external keyboard. Contact Dell (see "Contacting
Dell" on page 203).
R U N T H E K E Y B O A R D D I A G N O S T I C S T E S T S вЂ” Run the PC-AT Compatible
Keyboards tests in the Dell Diagnostics (see "Dell Diagnostics" on page 113).
If the tests indicate a defective external keyboard, contact Dell (see
"Contacting Dell" on page 203).
Unexpected characters
D I S A B L E T H E N U M E R I C K E Y P A D вЂ” Press <Num Lock> to disable the numeric
keypad if numbers are displayed instead of letters. Verify that the numbers
lock light is not lit.
132
Troubleshooting
Lockups and Software Problems
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
The computer does not start
C H E C K T H E A C A D A P T E R вЂ” Ensure that the AC adapter is firmly connected to
the computer and to the electrical outlet.
The AC adapter shuts down when there is a fault. The green light turns off
when this happens. To bring it back on, disconnect the AC adapter from the
power source for 10 seconds, and then connect it back on.
The computer stops responding
NOTICE: You might lose data if you are unable to perform an operating system
shutdown.
TU R N T H E C O M P U T E R O F F вЂ” If you are unable to get a response by pressing a
key on your keyboard or moving your mouse, press and hold the power button
for at least 8 to 10 seconds until the computer turns off, then restart your
computer.
A program stops responding or crashes repeatedly
END THE PROGRAM вЂ”
1 Press <Ctrl><Shift><Esc> simultaneously to access the Task Manager.
2 Click the Applications tab.
3 Click to select the program that is no longer responding.
4 Click End Task.
NOTE: The chkdsk program may run when you restart the computer. Follow the
instructions on the screen.
C H E C K T H E S O F T W A R E D O C U M E N T A T I O N вЂ” If necessary, uninstall and then
reinstall the program. Software usually includes installation instructions in its
documentation or on a floppy disk or CD.
Troubleshooting
133
A program is designed for an earlier MicrosoftВ® WindowsВ® operating
system
RUN THE PROGRAM COMPATIBILITY WIZARD вЂ”
Windows XP:
The Program Compatibility Wizard configures a program so that it runs in an
environment similar to non-XP operating system environments.
1 Click Startв†’ All Programsв†’ Accessoriesв†’ Program Compatibility
Wizardв†’ Next.
2 Follow the instructions on the screen.
Windows Vista:
The Program Compatibility Wizard configures a program so that it runs in an
environment similar to non-Windows Vista operating system environments.
1 Click Start
в†’ Control Panelв†’ Programsв†’ Use an older program
with this version of Windows.
2 In the welcome screen, click Next.
3 Follow the instructions on the screen.
A solid blue screen appears
TU R N T H E C O M P U T E R O F F вЂ” If you are unable to get a response by pressing a
key on your keyboard or moving your mouse, press and hold the power button
for at least 8 to 10 seconds until the computer turns off, then restart your
computer.
Dell MediaDirect problems
C H E C K T H E D E L L M E D I A D I R E C T H E L P F I L E F O R I N F O R M A T I O N вЂ” Use the Help
menu to access Dell MediaDirect Help.
TO P L A Y M O V I E S W I T H D E L L M E D I A D I R E C T , Y O U M U S T H A V E A DVD D R I V E A N D
T H E D E L L DV D P L A Y E R вЂ” If you purchased a DVD drive with your computer,
this software should already be installed.
V I D E O Q U A L I T Y P R O B L E M S вЂ” Turn off the Use Hardware Acceleration option.
This feature takes advantage of the special processing in some graphics cards
to reduce processor requirements when playing DVDs and certain types of
video files.
134
Troubleshooting
C A N N O T P L A Y S O M E M E D I A F I L E S вЂ” Because Dell MediaDirect provides access
to media files outside the Windows operating system environment, access to
licensed content is restricted. Licensed content is digital content that has
Digital Rights Management (DRM) applied to it. The Dell MediaDirect
environment cannot verify the DRM restrictions, so the licensed files cannot
be played. Licensed music and video files have a lock icon next to them. You
can access licensed files in the Windows operating system environment.
ADJUSTING THE COLOR SETTINGS FOR MOVIES THAT CONTAIN SCENES THAT ARE
T O O D A R K O R T O O B R I G H T вЂ” Click EagleVision to use a video enhancement
technology that detects video content and dynamically adjusts the
brightness/contrast/saturation ratios.
NOTICE: You cannot reinstall the Dell MediaDirect feature if you voluntarily
reformat the hard drive. Contact Dell for assistance (see "Contacting Dell" on
page 203).
Other software problems
CHECK THE SOFTWARE DOCUMENTATION OR CONTACT THE SOFTWARE
MANUFACTURER FOR TROUBLESHOOTING INFORMATION вЂ”
вЂў
Ensure that the program is compatible with the operating system installed
on your computer.
вЂў
Ensure that your computer meets the minimum hardware requirements
needed to run the software. See the software documentation for
information.
вЂў
Ensure that the program is installed and configured properly.
вЂў
Verify that the device drivers do not conflict with the program.
вЂў
If necessary, uninstall and then reinstall the program.
BACK UP YOUR FILES IMMEDIATELY
USE A VIRUS-SCANNING PROGRAM TO CHECK THE HARD DRIVE, FLOPPY DISKS,
O R CD S
SAVE AND CLOSE ANY OPEN FILES OR PROGRAMS AND SHUT DOWN YOUR
COMPUTER THROUGH THE START MENU
S C A N T H E C O M P U T E R F O R S P Y W A R E вЂ” If you are experiencing slow computer
performance, you frequently receive pop-up advertisements, or you are having
problems connecting to the Internet, your computer might be infected with
spyware. Use an anti-virus program that includes anti-spyware protection
Troubleshooting
135
(your program may require an upgrade) to scan the computer and remove
spyware. For more information, go to support.dell.com and search for the
keyword spyware.
R U N T H E D E L L D I A G N O S T I C S вЂ” If all tests run successfully, the error condition
is related to a software problem (see "Dell Diagnostics" on page 113).
Memory Problems
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
IF YOU RECEIVE AN INSUFFICIENT MEMORY MESSAGE вЂ”
вЂў
Save and close any open files and exit any open programs you are not using
to see if that resolves the problem.
вЂў
See the software documentation for minimum memory requirements. If
necessary, install additional memory (see "Memory" on page 172).
вЂў
Reseat the memory modules to ensure that your computer is successfully
communicating with the memory (see "Memory" on page 172).
вЂў
Run the Dell Diagnostics (see "Dell Diagnostics" on page 113).
IF YOU EXPERIENCE OTHER MEMORY PROBLEMS вЂ”
вЂў
Reseat the memory modules to ensure that your computer is successfully
communicating with the memory (see "Memory" on page 172).
вЂў
Ensure that you are following the memory installation guidelines (see
"Memory" on page 172).
вЂў
Ensure that the memory you are using is supported by your computer. For
more information about the type of memory supported by your computer,
see "Memory" on page 172.
вЂў
Run the Dell Diagnostics (see "Dell Diagnostics" on page 113).
Network Problems
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
C H E C K T H E N E T W O R K C A B L E C O N N E C T O R вЂ” Ensure that the network cable is
firmly inserted into both the network connector on the back of the computer
and the network jack.
136
Troubleshooting
C H E C K T H E N E T W O R K L I G H T S O N T H E N E T W O R K C O N N E C T O R вЂ” No light
indicates that no network communication exists. Replace the network cable.
RESTART THE COMPUTER AND LOG ON TO THE NETWORK AGAIN
C H E C K Y O U R N E T W O R K S E T T I N G S вЂ” Contact your network administrator or
the person who set up your network to verify that your network settings are
correct and that the network is functioning.
Mobile Broadband (Wireless Wide Area Network [WWAN])
NOTE: The Dell Mobile Broadband Card Utility userвЂ™s guide and the Mobile
Broadband ExpressCard userвЂ™s guide are available through Windows Help and
Support (click Startв†’ Help and Support). You can also download the Dell Mobile
Broadband Card Utility userвЂ™s guide from support.dell.com.
NOTE: The icon appears in the notification area if the computer has a Dell
WWAN device installed. Double-click the icon to launch the utility.
A C T I V A T E T H E M O B I L E B R O A D B A N D E X P R E S S C A R D вЂ” You must activate the
Mobile Broadband ExpressCard before you can connect to the network.
Position the mouse over the
icon in the notification area to verify the
status of the connection. If the card is not activated, follow the card
activation instructions located within the Dell Mobile Broadband Card
Utility. To access the utility, double-click the
icon located in the taskbar, at
the lower-right corner of your screen. If your ExpressCard is not a Dellbranded card, see the manufacturerвЂ™s instructions for your card.
CHECK NETWORK CONNECTION STATUS IN THE DELL MOBILE BROADBAND CARD
U T I L I T Y вЂ” Double-click the
icon to launch the Dell Mobile Broadband
Card Utility. Check the status in the main window:
вЂў
No card detected вЂ” Restart the computer, and launch the Dell Mobile
Broadband Card Utility again.
вЂў
Check your WWAN service вЂ” Contact your cellular service provider to
verify your plan coverage and supported services.
Power Problems
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
Troubleshooting
137
C H E C K T H E P O W E R L I G H T вЂ” When the power light is lit or blinking, the
computer has power. If the power light is blinking, the computer is in Sleep
stateвЂ”press the power button to exit Sleep state. If the light is off, press the
power button to turn on the computer.
NOTE: For information on the Sleep power state, see "Power Management Modes"
on page 63.
C H A R G E T H E B A T T E R Y вЂ” The battery charge may be depleted.
1 Reinstall the battery.
2 Use the AC adapter to connect the computer to an electrical outlet.
3 Turn on the computer.
NOTE: Battery operating time (the time the battery can hold a charge) decreases
over time. Depending on how often the battery is used and the conditions under
which it is used, you may need to purchase a new battery during the life of your
computer.
C H E C K T H E B A T T E R Y S T A T U S L I G H T вЂ” If the battery status light flashes amber
or is a steady amber, the battery charge is low or depleted. Connect the
computer to an electrical outlet.
If the battery status light flashes blue and amber, the battery is too hot to
charge. Shut down the computer, disconnect the computer from the electrical
outlet, and then let the battery and computer cool to room temperature.
If the battery status light rapidly flashes amber, the battery may be defective.
See "Contacting Dell" on page 203.
C H E C K T H E B A T T E R Y T E M P E R A T U R E вЂ” If the battery temperature is below 0В°C
(32В°F), the computer will not start.
TE S T T H E E L E C T R I C A L O U T L E T вЂ” Ensure that the electrical outlet is working by
testing it with another device, such as a lamp.
C H E C K T H E AC A D A P T E R вЂ” Check the AC adapter cable connections. If the
AC adapter has a light, ensure that the light is on.
C O N N E C T T H E C O M P U T E R D I R E C T L Y T O A N E L E C T R I C A L O U T L E T вЂ” Bypass power
protection devices, power strips, and extension cables to verify that the
computer turns on.
E L I M I N A T E P O S S I B L E I N T E R F E R E N C E вЂ” Turn off nearby fans, fluorescent lights,
halogen lamps, or other appliances.
138
Troubleshooting
A D J U S T T H E P O W E R P R O P E R T I E S вЂ” See "Power Management Modes" on
page 63.
R E S E A T T H E M E M O R Y M O D U L E S вЂ” If the computer power light turns on, but
the display remains blank, reinstall the memory modules (see "Memory" on
page 172).
Printer Problems
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTE: If you need technical assistance for your printer, contact the printerвЂ™s
manufacturer.
C H E C K T H E P R I N T E R D O C U M E N T A T I O N вЂ” See the printer documentation for
setup and troubleshooting information.
ENSURE THAT THE PRINTER IS TURNED ON
CHECK THE PRINTER CABLE CONNECTIONS вЂ”
вЂў
See the printer documentation for cable connection information.
вЂў
Ensure that the printer cables are securely connected to the printer and
the computer.
TE S T T H E E L E C T R I C A L O U T L E T вЂ” Ensure that the electrical outlet is working by
testing it with another device, such as a lamp.
VE R I F Y T H A T T H E P R I N T E R I S R E C O G N I Z E D B Y W I N D O W S вЂ”
Windows XP:
1 Click Startв†’ Control Panelв†’ Printers and Other Hardwareв†’ View
installed printers or fax printers.
2 If the printer is listed, right-click the printer icon.
3 Click Propertiesв†’ Ports. For a parallel printer, ensure that the Print to the
following port(s): setting is LPT1 (Printer Port). For a USB printer, ensure
that the Print to the following port(s): setting is USB.
Windows Vista:
1 Click the Windows Vista Start button
and Soundв†’ Printer.
в†’ Control Panelв†’ Hardware
2 If the printer is listed, right-click the printer icon.
Troubleshooting
139
3 Click Properties and click Ports.
4 Adjust the settings, as needed.
R E I N S T A L L T H E P R I N T E R D R I V E R вЂ” See the printer documentation for
instructions.
Scanner Problems
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTE: If you need technical assistance for your scanner, contact the scannerвЂ™s
manufacturer.
C H E C K T H E S C A N N E R D O C U M E N T A T I O N вЂ” See the scanner documentation for
setup and troubleshooting information.
U N L O C K T H E S C A N N E R вЂ” Ensure that your scanner is unlocked.
RESTART THE COMPUTER AND TRY THE SCANNER AGAIN
CHECK THE CABLE CONNECTIONS вЂ”
вЂў
See the scanner documentation for cable connection information.
вЂў
Ensure that the scanner cables are securely connected to the scanner and
the computer.
VE R I F Y T H A T T H E S C A N N E R I S R E C O G N I Z E D B Y M I C R O S O F T W I N D O W S вЂ”
Windows XP:
1 Click Startв†’ Control Panelв†’ Printers and Other Hardwareв†’ Scanners
and Cameras.
2 If your scanner is listed, Windows recognizes the scanner.
Windows Vista:
1 Click the Windows Vista Start button
and Soundв†’ Scanners and Cameras.
в†’ Control Panelв†’ Hardware
2 If the scanner is listed, Windows recognizes the scanner.
R E I N S T A L L T H E S C A N N E R D R I V E R вЂ” See the scanner documentation for
instructions.
140
Troubleshooting
Sound and Speaker Problems
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
No sound from integrated speakers
A D J U S T T H E W I N D O W S V O L U M E C O N T R O L вЂ” Double-click the speaker icon in
the lower-right corner of your screen. Ensure that the volume is turned up and
that the sound is not muted. Adjust the volume, bass, or treble controls to
eliminate distortion.
A D J U S T T H E V O L U M E U S I N G K E Y B O A R D S H O R T C U T S вЂ” Press <Fn><End> to
disable (mute) or re-enable the integrated speakers.
R E I N S T A L L T H E S O U N D ( A U D I O ) D R I V E R вЂ” See "Reinstalling Drivers and
Utilities" on page 146.
No sound from external speakers
E N S U R E T H A T T H E S U B W O O F E R A N D T H E S P E A K E R S A R E T U R N E D O N вЂ” See the
setup diagram supplied with the speakers. If your speakers have volume
controls, adjust the volume, bass, or treble to eliminate distortion.
A D J U S T T H E W I N D O W S V O L U M E C O N T R O L вЂ” Click or double-click the speaker
icon in the lower-right corner of your screen. Ensure that the volume is turned
up and that the sound is not muted.
D I S C O N N E C T H E A D P H O N E S F R O M T H E H E A D P H O N E C O N N E C T O R вЂ” Sound from
the speakers is automatically disabled when headphones are connected to the
headphone connector.
TE S T T H E E L E C T R I C A L O U T L E T вЂ” Ensure that the electrical outlet is working by
testing it with another device, such as a lamp.
E L I M I N A T E P O S S I B L E I N T E R F E R E N C E вЂ” Turn off nearby fans, fluorescent lights,
or halogen lamps to check for interference.
R E I N S T A L L T H E A U D I O D R I V E R вЂ” See "Reinstalling Drivers and Utilities" on
page 146.
R U N T H E D E L L D I A G N O S T I C S вЂ” See "Dell Diagnostics" on page 113.
NOTE: The volume control in some MP3 players overrides the Windows volume
setting. If you have been listening to MP3 songs, ensure that you did not turn the
player volume down or off.
Troubleshooting
141
No sound from headphones
C H E C K T H E H E A D P H O N E C A B L E C O N N E C T I O N вЂ” Ensure that the headphone
cable is securely inserted into the headphone connector (see "Using
ExpressCards" on page 91).
A D J U S T T H E W I N D O W S V O L U M E C O N T R O L вЂ” Click or double-click the speaker
icon in the lower-right corner of your screen. Ensure that the volume is turned
up and that the sound is not muted.
Remote Control Problems
APPLICATION DOES NOT RESPOND TO REMOTE CONTROL WITHIN THE SPECIFIED
MAXIMUM RANGE
вЂў
Check that the battery is placed correctly with the "+" side facing up.
Check that the battery is also not weak.
вЂў
Point your remote control to the receiver. The receiver is underneath the
touch pad of your computer.
вЂў
Move the remote control closer to your computer.
REMOTE CONTROL IS STUCK IN THE SLOT
Check that you have not incorrectly stored the remote control into a nonExpress Card slot. Contact Dell Technical Support for removing it.
Touch Pad or Mouse Problems
CHECK THE TOUCH PAD SETTINGS вЂ”
Windows XP:
1 Click Startв†’ Control Panelв†’ Mouse.
2 Adjust the settings, as needed.
Windows Vista:
1 Click the Windows Vista Start button
and Soundв†’ Mouse.
в†’ Control Panelв†’ Hardware
2 Adjust the settings, as needed.
C H E C K T H E M O U S E C A B L E вЂ” Shut down the computer, disconnect the mouse
cable and check it for damage, then firmly reconnect the cable.
142
Troubleshooting
If you are using a mouse extension cable, disconnect it and connect the
mouse directly to the computer.
TO V E R I F Y T H A T T H E P R O B L E M I S W I T H T H E M O U S E , C H E C K T H E T O U C H P A D вЂ”
1 Shut down the computer.
2 Disconnect the mouse.
3 Turn on the computer.
4 At the Windows desktop, use the touch pad to move the cursor around,
select an icon, and open it.
If the touch pad operates correctly, the mouse may be defective.
C H E C K T H E S YS T E M S E T U P P R O G R A M S E T T I N G S вЂ” Verify that the system setup
program lists the correct device for the pointing device option (the computer
automatically recognizes a USB mouse without making any setting
adjustments).
TE S T T H E M O U S E C O N T R O L L E R вЂ” To test the mouse controller (which affects
pointer movement) and the operation of the touch pad or mouse buttons,
run the Mouse test in the Pointing Devices test group in the "Dell
Diagnostics" on page 113.
R E I N S T A L L T H E T O U C H P A D D R I V E R вЂ” See "Reinstalling Drivers and Utilities"
on page 146.
Video and Display Problems
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
If the display is blank
NOTE: If you are using a program that requires a higher resolution than your
computer supports, it is recommended that you attach an external monitor to your
computer.
C H E C K T H E B A T T E R Y вЂ” If you are using a battery to power your computer, the
battery charge may be depleted. Connect the computer to an electrical outlet
using the AC adapter, and then turn on the computer.
TE S T T H E E L E C T R I C A L O U T L E T вЂ” Ensure that the electrical outlet is working by
testing it with another device, such as a lamp.
Troubleshooting
143
C H E C K T H E AC A D A P T E R вЂ” Check the AC adapter cable connections. If the
AC adapter has a light, ensure that the light is on.
C O N N E C T T H E C O M P U T E R D I R E C T L Y T O A N E L E C T R I C A L O U T L E T вЂ” Bypass power
protection devices, power strips, and extension cables to verify that the
computer turns on.
A D J U S T T H E P O W E R P R O P E R T I E S вЂ” Search for the keyword sleep in Windows
Help and Support.
S W I T C H T H E V I D E O I M A G E вЂ” If your computer is attached to an external
monitor, press <Fn><F8> to switch the video image to the display.
If the display is difficult to read
A D J U S T T H E B R I G H T N E S S вЂ” Press <Fn> and the up- or down-arrow key.
M O V E T H E E X T E R N A L S U B W O O F E R A W A Y F R O M T H E C O M P U T E R O R M O N I T O R вЂ” If
your external speaker system includes a subwoofer, ensure that the subwoofer
is at least 60 cm (2 ft) away from the computer or external monitor.
E L I M I N A T E P O S S I B L E I N T E R F E R E N C E вЂ” Turn off nearby fans, fluorescent lights,
halogen lamps, or other appliances.
R O T A T E T H E C O M P U T E R T O F A C E A D I F F E R E N T D I R E C T I O N вЂ” Eliminate sunlight
glare, which can cause poor picture quality.
ADJUST THE WINDOWS DISPLAY SETTINGS вЂ”
Windows XP:
1 Click Startв†’ Control Panelв†’ Appearance and Themes.
2 Click the area you want to change or click the Display icon.
3 Try different settings for Color quality and Screen resolution.
Windows Vista:
1 Click the Windows Vista Start button
в†’ Control Panelв†’ Hardware
and Soundв†’ Personalizationв†’ Display Settings.
2 Adjust Resolution and Colors settings, as needed.
R U N T H E V I D E O D I A G N O S T I C S T E S T S вЂ” If no error message appears and you
still have a display problem, but the display is not completely blank, run the
Video device group in the "Dell Diagnostics" on page 113, then contact Dell
(see "Contacting Dell" on page 203).
S E E "E R R O R M E S S A G E S " вЂ” If an error message appears, see "Error Messages"
on page 125.
144
Troubleshooting
If only part of the display is readable
CONNECT AN EXTERNAL MONITOR вЂ”
1 Shut down your computer and connect an external monitor to the
computer.
2 Turn on the computer and the monitor, and then adjust the monitor
brightness and contrast controls.
If the external monitor works, the computer display or video controller
may be defective. Contact Dell (see "Contacting Dell" on page 203).
Drivers
What Is a Driver?
A driver is a program that controls a device such as a printer, mouse, or
keyboard. All devices require a driver program.
A driver acts like a translator between the device and any other programs that
use the device. Each device has its own set of specialized commands that only
its driver recognizes.
Dell ships your computer to you with required drivers already installedвЂ”no
further installation or configuration is needed.
NOTICE: Your Drivers and Utilities media may contain drivers for operating systems
that are not on your computer. Ensure that you are installing software appropriate
for your operating system.
Many drivers, such as the keyboard driver, come with your Microsoft
Windows operating system. You may need to install drivers if you:
вЂў
Upgrade your operating system.
вЂў
Reinstall your operating system.
вЂў
Connect or install a new device.
Identifying Drivers
If you experience a problem with any device, identify whether the driver is the
source of your problem and, if necessary, update the driver.
Troubleshooting
145
Windows XP:
1 Click Startв†’ Control Panel.
2 Under Pick a Category, click Performance and Maintenance, and click
System.
3 In the System Properties window, click the Hardware tab, and click Device
Manager.
Windows Vista:
1 Click the Windows Vista Start button
and right-click Computer.
2 Click Propertiesв†’ Device Manager.
NOTE: The User Account Control window may appear. If you are an
administrator on the computer, click Continue; otherwise, contact your
administrator to continue.
Scroll down the list to see if any device has an exclamation point (a yellow
circle with a [!]) on the device icon.
If an exclamation point is next to the device name, you may need to reinstall
the driver or install a new driver (see "Reinstalling Drivers and Utilities" on
page 146).
Reinstalling Drivers and Utilities
NOTICE: The Dell Support website at support.dell.com and your Drivers and
Utilities media provide approved drivers for Dell computers. If you install drivers
obtained from other sources, your computer might not work correctly.
Using Windows Device Driver Rollback
If a problem occurs on your computer after you install or update a driver, use
Windows Device Driver Rollback to replace the driver with the previously
installed version.
Windows XP:
1 Click Startв†’ My Computerв†’ Propertiesв†’ Hardwareв†’ Device Manager.
2 Right-click the device for which the new driver was installed and click
Properties.
3 Click the Drivers tabв†’ Roll Back Driver.
146
Troubleshooting
Windows Vista:
1 Click the Windows Vista start button
, and right-click Computer.
2 Click Propertiesв†’ Device Manager.
NOTE: The User Account Control window may appear. If you are an
administrator on the computer, click Continue; otherwise, contact your
administrator to enter the Device Manager.
3 Right-click the device for which the new driver was installed and click
Properties.
4 Click the Drivers tabв†’Roll Back Driver.
If Device Driver Rollback does not resolve the problem, use System Restore
(see "Restoring your Microsoft Windows Operating System" on page 150) to
return your computer to the operating state that existed before you installed
the new driver.
Using the Drivers and Utilities Media
If using Device Driver Rollback or System Restore (see "Restoring your
Microsoft Windows Operating System" on page 150) does not resolve the
problem, reinstall the driver from your Drivers and Utilities media.
1 With the Windows desktop displayed, insert your Drivers and Utilities
media.
If this is your first time to use your Drivers and Utilities media, continue
to step 2. If not, proceed to step 5.
2 When the Drivers and Utilities installation program starts, follow the
prompts on the screen.
NOTE: In most cases, the Drivers and Utilities program starts running
automatically. If it does not, start Windows Explorer, click your media drive
directory to display the media contents, and then double-click the autorcd.exe
file.
3 When the InstallShield Wizard Complete window appears, remove the
Drivers and Utilities disc and click Finish to restart the computer.
4 When you see the Windows desktop, reinsert the Drivers and Utilities
disc.
Troubleshooting
147
5 At the Welcome Dell System Owner screen, click Next.
NOTE: The Drivers and Utilities program displays drivers only for hardware
that came installed in your computer. If you installed additional hardware, the
drivers for the new hardware might not be displayed. If those drivers are not
displayed, exit the Drivers and Utilities program. For drivers information, see
the documentation that came with the device.
A message stating that the Drivers and Utilities program is detecting
hardware in your computer appears.
The drivers that are used by your computer are automatically displayed in
the My DriversвЂ”The ResourceCD has identified these components in
your system window.
6 Click the driver that you want to reinstall and follow the instructions on
the screen.
If a particular driver is not listed, then that driver is not required by your
operating system.
Manually Reinstalling Drivers
NOTE: If your computer has a Consumer IR port and you are reinstalling a
Consumer IR driver, you must first enable the Consumer IR port in the system setup
program (see "Using the System Setup Program" on page 215) before continuing
with the driver installation (see "Reinstalling Drivers and Utilities" on page 146). For
information about components installed on your computer, see "Determining Your
ComputerвЂ™s Configuration" on page 21.
After extracting the driver files to your hard drive, as described in the previous
section:
Windows XP:
1 Click Startв†’ My Computerв†’ Propertiesв†’ Hardwareв†’ Device Manager.
2 Double-click the type of device for which you are installing the driver (for
example, Audio or Video).
3 Double-click the name of the device for which you are installing the driver.
4 Click the Driver tabв†’ Update Driver.
5 Click Install from a list or specific location (Advanced)в†’ Next.
6 Click Browse and browse to the location to which you previously copied
the driver files.
148
Troubleshooting
7 When the name of the appropriate driver appears, click Next.
8 Click Finish and restart your computer.
Windows Vista:
1 Click the Windows Vista start button
, and right-click Computer.
2 Click Propertiesв†’ Device Manager.
NOTE: The User Account Control window may appear. If you are an
administrator on the computer, click Continue; otherwise, contact your
administrator to enter the Device Manager.
3 Double-click the type of device for which you are installing the driver (for
example, Audio or Video).
4 Double-click the name of the device for which you are installing the driver.
5 Click the Driver tabв†’ Update Driverв†’ Browse my computer for driver
software.
6 Click Browse and browse to the location to which you previously copied
the driver files.
7 When the name of the appropriate driver appears, click the name of the
driverв†’ OKв†’ Next.
8 Click Finish and restart your computer.
Troubleshooting Software and Hardware
Problems
If a device is either not detected during the operating system setup or is
detected but incorrectly configured, you can use the Hardware
Troubleshooter to resolve the incompatibility.
NOTE: Windows VistaВ® is a new operating system, so drivers or applications that
support certain devices may not yet be available. Check with your hardware
manufacturer for information on Windows Vista support for your device.
To start the Hardware Troubleshooter:
Windows XP:
1 Click Startв†’ Help and Support.
2 Type hardware troubleshooter in the search field and press
<Enter> to start the search.
Troubleshooting
149
3 In the Fix a Problem section, click Hardware Troubleshooter.
4 In the Hardware Troubleshooter list, select the option that best describes
the problem and click Next to follow the remaining troubleshooting steps.
Windows Vista:
1 Click the Windows Vista Start button
and click Help and Support.
2 In the Find an answer section, click Troubleshooting.
OR
Type hardware troubleshooter in the search field, and then press
<Enter>.
3 In the search results, select the option that best describes the problem and
follow the remaining troubleshooting steps.
NOTE: If you do not find the answer in the items categorized in
Troubleshooting, you can get online help by typing your question in the Search
Help field at the top of the window.
Restoring your Microsoft Windows Operating
System
Restoring Windows VistaВ®
You can restore your Windows Vista operating system in the following ways:
150
вЂў
Windows Vista includes the Backup and Restore Center to create backups
of important files on your computer or to back up the entire hard drive.
You can then restore your operating system or files if needed.
вЂў
Microsoft Windows System Restore returns your hard drive to an earlier
operating state without affecting data files. Use System Restore as the first
solution for restoring your operating system and preserving data files. For
instructions, see "Using Microsoft Windows System Restore" on page 156.
вЂў
Dell Factory Image Restore restores your hard drive to the operating state
it was in when you purchased the computer. Dell Factory Image Restore
permanently deletes all data on the hard drive and removes any
Troubleshooting
applications installed after you received the computer. Use Factory Image
Restore only if System Restore did not resolve your operating system
problem.
вЂў
If you received an Operating System disc with your computer, you can use
it to restore your operating system. However, using the Operating System
disc also deletes all data on the hard drive. Use the disc only if System
Restore did not resolve your operating system problem.
Using Windows Vista System Restore
The Windows Vista operating system provides System Restore to allow you to
return your computer to an earlier operating state (without affecting data
files) if changes to the hardware, software, or other system settings have left
the computer in an undesirable operating state. See the Windows Help and
Support Center for information on using System Restore.
To access the Windows Help and Support Center, click the Windows Vista
Start button
в†’ Help and Support.
NOTICE: Make regular backups of your data files. System Restore does not
monitor your data files or recover them.
NOTE: The procedures in this document were written for the Windows default
view, so they may not apply if you set your Dell computer to the Windows Classic
view.
Creating a Restore Point
You can either automatically or manually create a restore point from the
Windows Vista Back Up and Restore Center. To access the Windows Vista
Backup and Restore Center:
вЂў
Click the Windows Vista Start button
в†’ Welcome Center. In the Get
started with Windows section, click Show all 14 itemsвЂ¦в†’ Back Up and
Restore Center.
OR
вЂў
Click the Windows Vista Start button
в†’ All Programsв†’
Maintenanceв†’ Back Up and Restore Center. Under Tasks, click Create a
restore point or change settings.
Troubleshooting
151
For more information:
1 Click the Windows Vista Start button
в†’ Help and Support.
2 Type System Restore in the search field and press <Enter>.
Restoring the Computer to an Earlier Operating State
If problems occur after you install a device driver, use Device Driver Rollback
(see "Using Windows Device Driver Rollback" on page 146) to resolve the
problem. If Device Driver Rollback does not resolve the problem, then use
System Restore.
NOTICE: Before you restore the computer to an earlier operating state, save and
close all open files and exit any open programs. Do not alter, open, or delete any
files or programs until the system restoration is complete.
1 Click the Windows Vista Start button
в†’ Control Panelв†’ System and
Maintenanceв†’ Back Up and Restore Center.
2 In the Tasks list, click Repair Windows using System Restore.
3 Click Continue in the User Account Control (UAC) dialog box asking for
permission to run the application.
4 Click Next in the System Restore window to view the most recent restore
points in chronological order.
5 Select the Show restore points older than 5 days check box to view the
complete list of restore points.
6 Select a restore point. Try to restore from the most recent restore point. If
this restore point fails to correct the problem, try the next oldest restore
point until the issue is resolved. Any software installed after the selected
restore point will need to be reinstalled.
7 Click Nextв†’ Finish.
8 When prompted, click Yes.
9 After System Restore finishes collecting data, the computer restarts.
10 After the computer restarts, click OK.
To change the restore point, you can either repeat the steps using a different
restore point, or you can undo the restoration.
If you encounter any error messages during the restore process, follow the
prompts on the screen to correct the error.
152
Troubleshooting
Undoing the Last System Restore
NOTICE: Before you undo the last system restore, save and close all open files and
exit any open programs. Do not alter, open, or delete any files or programs until the
system restoration is complete.
1 Click the Windows Vista Start button
в†’ Help and Support.
2 Type System Restore in the search field and press <Enter>.
3 Click Undo my last restoration, and then click Next.
Restoring the Computer to the Default Factory Configuration
The Dell Factory Image Restore option allows you to restore your hard drive
back to its original factory configuration as when you first purchased it from
Dell. This option appears on Dell computers that were originally pre-installed
with the Windows Vista operating system and does not include computers
purchased through the Express Upgrade promotion or computers that were
upgraded to Windows Vista from a previous version of the Windows
operating systems.
NOTICE: When you restore the computer to the default factory configuration, all
data on the hard drive is deleted. Before performing this procedure, back up
personal files. If you do not back up personal files, the data is lost.
1 Restart the computer. To do this, click the Windows Vista Start button
в†’
в†’ Restart.
2 As the computer restarts, press <F8> until the Advanced Boot Options
menu appears on the screen.
NOTE: You must press the <F8> key before the Windows logo appears on the
screen. If you press <F8> after the Windows logo appears on the screen, the
Advanced Boot Options menu will not appear on the screen. If you do not see the
Advanced Boot Options menu, restart the computer, and then repeat this step until
you see the menu on the screen.
3 Press <Down Arrow> to select Repair Your Computer on the Advanced
Boot Options menu, and then press <Enter>.
4 Specify the language settings that you want, and then click Next.
5 Log in as a user who has administrative credentials, and then click OK.
6 Click Dell Factory Image Restore.
7 In the Dell Factory Image Restore window, click Next.
Troubleshooting
153
8 Select the Yes, reformat hard drive and restore system software to factory
condition check box.
9 Click Next. The computer is restored to the default factory configuration.
10 When the restore operation is completed, click Finish to restart the
computer.
Using the Operating System Media
Before You Begin
If you are considering reinstalling the Windows operating system to correct a
problem with a newly installed driver, first try using Windows Device Driver
Rollback (see "Using Windows Device Driver Rollback" on page 146). If
Device Driver Rollback does not resolve the problem, then use System
Restore to return your operating system to the operating state it was in before
you installed the new device driver (see "Using Microsoft Windows System
Restore" on page 156).
NOTICE: Before performing the installation, back up all data files on your primary
hard drive. For conventional hard drive configurations, the primary hard drive is the
first drive detected by the computer.
To reinstall Windows, you need the following items:
вЂў
Dell Operating System media
вЂў
Dell Drivers and Utilities media
NOTE: Your Drivers and Utilities media contains drivers that were installed during
assembly of the computer. Use your Drivers and Utilities media to load any required
drivers, including the drivers required if your computer has a RAID controller.
Reinstalling Windows Vista
The reinstallation process can take 1 to 2 hours to complete. After you
reinstall the operating system, you must also reinstall the device drivers, virus
protection program, and other software.
154
Troubleshooting
NOTICE: The Operating System media provides options for reinstalling Windows.
The options can overwrite files and possibly affect programs that are installed on
your hard drive. Therefore, do not reinstall Windows unless a Dell technical support
representative instructs you to do so.
1 Save and close any open files and exit any open programs.
2 Insert the Operating System media.
3 Click Exit if the Install Windows message appears.
4 Restart the computer.
When the DELL logo appears, press <F12> immediately.
NOTE: If you wait too long and the operating system logo appears, continue
to wait until you see the Microsoft Windows desktop, then shut down your
computer and try again.
NOTE: The next steps change the boot sequence for one time only. On the
next start-up, the computer boots according to the devices specified in the
system setup program.
5 When the boot device list appears, highlight CD/DVD/CD-RW Drive,
and then press <Enter>.
6 Press any key to Boot from CD-ROM.
7 Follow the instructions on the screen to complete the installation.
NOTE: You cannot reinstall Dell MediaDirect if you voluntarily reformat the hard
drive. You need the installation software to reinstall Dell MediaDirect. See
"Contacting Dell" on page 203.
Restoring Windows XP
System Restore returns your computer to an earlier operating state without
affecting data files. Use System Restore as the first solution for restoring your
operating system and preserving data files.
вЂў
Dell PC Restore by Symantec returns your hard drive to the operating state
it was in when you purchased the computer. It permanently deletes all data
on the hard drive and removes any programs installed after you received
the computer. Use Dell PC Restore only if System Restore did not resolve
your operating system problem.
Troubleshooting
155
вЂў
If you received an Operating System disc with your computer, you can use
it to restore your operating system. However, using the Operating System
disc also deletes all data on the hard drive. Use the disc only if System
Restore did not resolve your operating system problem.
Using Microsoft Windows System Restore
The Windows operating system provides System Restore to allow you to
return your computer to an earlier operating state (without affecting data
files) if changes to the hardware, software, or other system settings have left
the computer in an undesirable operating state. See the Windows Help and
Support Center for information on using System Restore.
NOTICE: Make regular backups of your data files. System Restore does not
monitor your data files or recover them.
NOTE: The procedures in this document were written for the Windows default view,
so they may not apply if you set your Dell computer to the Windows Classic view.
Starting System Restore
NOTICE: Before you restore the computer to an earlier operating state, save and
close any open files and exit any open programs. Do not alter, open, or delete any
files or programs until the system restoration is complete.
1 Click Startв†’ All Programsв†’ Accessoriesв†’System Toolsв†’ System
Restore.
2 Click either Restore my computer to an earlier time or Create a restore
point.
3 Click Next and follow the remaining prompts on the screen.
In the event that System Restore did not resolve the issue, you may undo the
last system restore.
Undoing the Last System Restore
NOTICE: Before you undo the last system restore, save and close all open files and
exit any open programs. Do not alter, open, or delete any files or programs until the
system restoration is complete.
1 Click Startв†’ All Programsв†’ Accessoriesв†’ System Toolsв†’ System
Restore.
2 Click Undo my last restoration and click Next.
156
Troubleshooting
Enabling System Restore
NOTE: If you reinstall Windows XP with less than 200 MB of free hard-disk space
available, System Restore is automatically disabled.
To see if System Restore is enabled:
1 Click Startв†’ Control Panelв†’ Performance and Maintenanceв†’ System.
2 Click the System Restore tab and ensure that Turn off System Restore is
unchecked.
Using Dellв„ў PC Restore
NOTICE: Using Dell PC Restore permanently deletes all data on the hard drive and
removes any programs or drivers installed after you received your computer. If
possible, back up the data before using these options. Use PC Restore only if
System Restore did not resolve your operating system problem.
NOTE: Dell PC Restore by Symantec may not be available in certain countries or on
certain computers.
Use Dell PC Restore only as the last method to restore your operating system.
These options restore your hard drive to the operating state it was in when
you purchased the computer. Any programs or files added since you received
your computerвЂ”including data filesвЂ”are permanently deleted from the hard
drive. Data files include documents, spreadsheets, e-mail messages, digital
photos, music files, and so on. If possible, back up all data before using PC
Restore.
To use PC Restore:
1 Turn on the computer.
During the boot process, a blue bar with www.dell.com appears at the top
of the screen.
2 Immediately upon seeing the blue bar, press <Ctrl><F11>.
If you do not press <Ctrl><F11> in time, let the computer finish
booting (starting), and then restart the computer again.
NOTICE: If you do not want to proceed with PC Restore, click Reboot.
3 Click Restore and click Confirm.
The restore process takes approximately 6 to 10 minutes to complete.
Troubleshooting
157
4 When prompted, click Finish to reboot the computer.
NOTE: Do not manually shut down the computer. Click Finish and let the computer
completely reboot.
5 When prompted, click Yes.
The computer restarts. Because the computer is restored to its original
operating state, the screens that appear, such as the End User License
Agreement, are the same ones that appeared the first time the computer
was turned on.
6 Click Next.
The System Restore screen appears and the computer restarts.
7 After the computer restarts, click OK.
To remove PC Restore from the hard drive:
NOTICE: Removing Dell PC Restore from the hard drive permanently deletes the PC
Restore utility from your computer. After you have removed Dell PC Restore, you will
not be able to use it to restore your computer operating system.
Dell PC Restore enables you to restore your hard drive to the operating state
it was in when you purchased your computer. It is recommended that you do
not remove PC Restore from your computer, even to gain additional harddrive space. If you remove PC Restore from the hard drive, you cannot ever
recall it, and you will never be able to use PC Restore to return your computer
operating system to its original state.
1 Log on to the computer as a local administrator.
2 In Microsoft Windows Explorer, go to c:\dell\utilities\DSR.
3 Double-click the filename DSRIRRemv2.exe.
NOTE: If you do not log on as a local administrator, a message appears
stating that you that you must log on as administrator. Click Quit, and then log
on as a local administrator.
NOTE: If the partition for PC Restore does not exist on your computer hard
drive, a message appears stating that the partition was not found. Click Quit;
because there is no partition to delete.
4 Click OK to remove the PC Restore partition on the hard drive.
158
Troubleshooting
5 Click Yes when a confirmation message appears.
The PC Restore partition is deleted and the newly available disk space is
added to the free space allocation on the hard drive.
6 Right-click Local Disk (C) in Windows Explorer, click Properties, and
verify that the additional disk space is available as indicated by the
increased value for Free Space.
7 Click Finish to close the PC Restore Removal window and restart the
computer.
Using the Operating System Media
Before You Begin
If you are considering reinstalling the Windows operating system to correct a
problem with a newly installed driver, first try using Windows Device Driver
Rollback (see "Using Windows Device Driver Rollback" on page 146). If
Device Driver Rollback does not resolve the problem, then use System
Restore to return your operating system to the operating state it was in before
you installed the new device driver (see "Using Microsoft Windows System
Restore" on page 156).
NOTICE: Before performing the installation, back up all data files on your primary
hard drive. For conventional hard drive configurations, the primary hard drive is the
first drive detected by the computer.
To reinstall Windows, you need the following items:
вЂў
Dell Operating System media
вЂў
Dell Drivers and Utilities media
NOTE: Your Drivers and Utilities media contains drivers that were installed during
assembly of the computer. Use your Drivers and Utilities media to load any required
drivers, including the drivers required if your computer has a RAID controller.
Reinstalling Windows XP
The reinstallation process can take 1 to 2 hours to complete. After you
reinstall the operating system, you must also reinstall the device drivers, virus
protection program, and other software.
Troubleshooting
159
NOTICE: The Operating System media provides options for reinstalling Windows.
The options can overwrite files and possibly affect programs that are installed on
your hard drive. Therefore, do not reinstall Windows unless a Dell technical support
representative instructs you to do so.
1 Save and close any open files and exit any open programs.
2 Insert the Operating System media.
3 Click Exit if the Install Windows message appears.
4 Restart the computer.
When the DELL logo appears, press <F12> immediately.
NOTE: If you wait too long and the operating system logo appears, continue
to wait until you see the Microsoft Windows desktop, then shut down your
computer and try again.
NOTE: The next steps change the boot sequence for one time only. On the
next start-up, the computer boots according to the devices specified in the
system setup program.
5 When the boot device list appears, highlight CD/DVD/CD-RW Drive,
and then press <Enter>.
6 Press any key to Boot from CD-ROM.
7 Follow the instructions on the screen to complete the installation.
NOTE: You cannot reinstall Dell MediaDirect if you voluntarily reformat the hard
drive. You need the installation software to reinstall Dell MediaDirect. See
"Contacting Dell" on page 203.
160
Troubleshooting
Adding and Replacing Parts
13
Before You Begin
This chapter provides procedures for removing and installing the components
in your computer. Unless otherwise noted, each procedure assumes that the
following conditions exist:
вЂў
You have performed the steps in "Turning Off Your Computer" on page 161
and "Before Working Inside Your Computer" on page 162.
вЂў
You have read the safety information in your Dell Product Information
Guide.
вЂў
A component can be replaced orвЂ”if purchased separatelyвЂ”installed by
performing the removal procedure in reverse order.
Recommended Tools
The procedures in this document may require the following tools:
вЂў
Small flat-blade screwdriver
вЂў
Phillips screwdriver
вЂў
Small plastic scribe
вЂў
Flash BIOS update (see the Dell Support website at support.dell.com)
Turning Off Your Computer
NOTICE: To avoid losing data, save and close any open files and exit any open
programs before you turn off your computer.
1 Save and close all open files and exit all open programs.
2 Shut down the operating system:
WindowsВ® XP:
Click Startв†’ Shut Downв†’ Shut down.
Adding and Replacing Parts
161
Windows Vistaв„ў:
Click the Windows Vista Start button
, click the arrow in the
lower-right corner of the Start menu as shown below, and then click
Shut Down.
The computer turns off after the operating system shutdown process
is complete.
3 Ensure that the computer and all attached devices are turned off. If your
computer and attached devices did not automatically turn off when you
shut down your operating system, press and hold the power button for
about 4 seconds to turn them off.
Before Working Inside Your Computer
Use the following safety guidelines to help protect your computer from
potential damage and to help ensure your own personal safety.
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
CAUTION: Handle components and cards with care. Do not touch the components
or contacts on a card. Hold a card by its edges or by its metal mounting bracket.
Hold a component such as a processor by its edges, not by its pins.
NOTICE: Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.
NOTICE: When you disconnect a cable, pull on its connector or on its strain-relief
loop, not on the cable itself. Some cables have a connector with locking tabs; if you
are disconnecting this type of cable, press in on the locking tabs before you
disconnect the cable. As you pull connectors apart, keep them evenly aligned to
avoid bending any connector pins. Also, before you connect a cable, ensure that
both connectors are correctly oriented and aligned.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
162
Adding and Replacing Parts
NOTICE: To help prevent damage to the computer, perform the following steps
before you begin working inside the computer.
1 Ensure that the work surface is flat and clean to prevent the computer
cover from being scratched.
2 Turn off your computer (see "Turning Off Your Computer" on page 161).
NOTICE: To disconnect a network cable, first unplug the cable from your computer,
and then unplug it from the network connector.
3 Disconnect any telephone or network cables from the computer.
4 Disconnect your computer and all attached devices from their electrical
outlets.
NOTICE: To help prevent damage to the system board, remove the battery from the
battery bay before you service the computer.
NOTE: To avoid damage to the computer, use only the battery designed for this
particular Dell computer. Do not use batteries designed for other Dell computers.
5 Turn the computer over.
6 Slide and click the battery release latches.
7 Slide the battery out of the battery bay.
1
1
battery
2
2
battery release latches (2)
Adding and Replacing Parts
163
8 Turn the computer top-side up, open the display, and press the power
button to ground the system board.
9 Remove any installed cards from the ExpressCard slot (see "Removing an
ExpressCard or Blank" on page 93) and the 8-in-1 memory card reader (see
"Removing a Memory Card or Blank" on page 96).
Hard Drive
CAUTION: If you remove the hard drive from the computer when the drive is hot,
do not touch the metal housing of the hard drive.
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE: To prevent data loss, turn off your computer (see "Turning Off Your
Computer" on page 161) before removing the hard drive. Do not remove the hard
drive while the computer is on or in Standby or Sleep mode.
NOTICE: Hard drives are extremely fragile. Exercise care when handling the hard
drive.
NOTE: Dell does not guarantee compatibility or provide support for hard drives
from sources other than Dell.
NOTE: If you are installing a hard drive from a source other than Dell, you need to
install an operating system, drivers, and utilities on the new hard drive (see
"Restoring your Microsoft Windows Operating System" on page 150 and
"Reinstalling Drivers and Utilities" on page 146).
Removing the Hard Drive
1 Follow the procedures in "Before You Begin" on page 161.
2 Turn the computer over and remove the hard drive screws.
164
Adding and Replacing Parts
2
1
1
hard drive
2
hard drive screws (4)
NOTICE: When the hard drive is not in the computer, store it in protective antistatic
packaging (see "Protecting Against Electrostatic Discharge" in the Product
Information Guide).
3 Slide the hard drive out of the computer.
4 Remove the two hard-drive bezel screws and pull the hard drive bezel off
the hard drive.
Adding and Replacing Parts
165
1
1
hard drive bezel
3
hard drive
2
3
2
hard-drive bezel screws (2)
Replacing the Hard Drive
1 Remove the new drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
NOTICE: Use firm and even pressure to slide the drive into place. If you use
excessive force, you may damage the connector.
2 Slide the hard drive bezel that you took off the old hard drive onto the new
hard drive, and fasten the two hard-drive bezel screws.
3 Slide the hard drive into the hard drive bay until it is fully seated.
4 Replace and tighten the hard drive screws.
5 Install the operating system for your computer, as needed (see "Restoring
your Microsoft Windows Operating System" on page 150).
6 Install the drivers and utilities for your computer, as needed (see
"Reinstalling Drivers and Utilities" on page 146).
166
Adding and Replacing Parts
Returning a Hard Drive to Dell
Return your old hard drive to Dell in its original, or comparable, foam
packaging. Otherwise, the hard drive may be damaged in transit.
2
1
1
foam packaging
2
hard drive
Optical Drive
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
Removing the Optical Drive
1 Follow the procedures in "Before You Begin" on page 161.
2 Turn the computer over.
3 Remove the device security screw from the optical drive.
4 Using a plastic scribe, push the notch to release the optical drive from the
bay.
5 Slide the optical drive out of the bay.
Adding and Replacing Parts
167
1
3
1
optical drive
3
device security screw
2
2
notch
Hinge Cover
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE: To help prevent damage to the system board, remove the battery from the
battery bay before you begin working inside the computer.
Removing the Hinge Cover
1 Follow the procedures in "Before You Begin" on page 161.
2 Open the display as far as it will open.
168
Adding and Replacing Parts
NOTICE: To avoid damage to the hinge cover, do not lift the cover on both sides
simultaneously.
3 Insert a plastic scribe into the indent to lift the hinge cover on the right
side.
4 Ease the hinge cover up, moving from right to left, and remove it.
1
2
1
hinge cover
2
scribe
Replacing the Hinge Cover
1 Insert the left edge of the hinge cover.
2 Press from left to right until the cover snaps into place.
Keyboard
For more information about the keyboard, see "Using the Keyboard and
Touch Pad" on page 53.
Adding and Replacing Parts
169
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE: To help prevent damage to the system board, remove the battery from the
battery bay before you begin working inside the computer.
Removing the Keyboard
1 Follow the procedures in "Before You Begin" on page 161.
2 Remove the hinge cover (see "Hinge Cover" on page 168).
3 Remove the two keyboard screws at the top of the keyboard.
NOTICE: The key caps on the keyboard are fragile, easily dislodged, and timeconsuming to replace. Be careful when removing and handling the keyboard.
4 Lift the keyboard and hold it up and slightly forward to access the keyboard
connector.
5 To disconnect the keyboard cable from the keyboard connector on the
system board, rotate the cable release lever toward the front of the
computer.
6 Slide the keyboard cable out of the keyboard connector on the DIMM A
memory module cover.
170
Adding and Replacing Parts
1
2
3
4
5
1
keyboard screws (2)
2
keyboard
3
tabs (5)
4
keyboard cable
5
cable release lever
Replacing the Keyboard
1 Slide the keyboard cable into the keyboard connector on the DIMM A
memory module cover.
2 Rotate the cable release lever to secure the cable.
3 Hook the tabs along the front edge of the keyboard into the palm rest.
4 Press on the right edge near the top to snap the keyboard into place.
5 Replace the two keyboard screws at the top of the keyboard.
Adding and Replacing Parts
171
Memory
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
You can increase your computer memory by installing memory modules on
the system board. See "Specifications" on page 205 for information on the
memory supported by your computer. Install only memory modules that are
intended for your computer.
NOTE: Memory modules purchased from Dell are covered under your computer
warranty.
Your computer has two user-accessible SODIMM sockets, one accessed from
beneath the keyboard (DIMM A), and the other accessed from the bottom of
the computer (DIMM B).
NOTICE: If your computer has only one memory module, install the memory module
in the connector labeled вЂњDIMMA.вЂќ
NOTICE: If you need to install memory modules in two connectors, install a
memory module in the connector labeled вЂњDIMMAвЂќ before you install a module in
the connector labeled вЂњDIMMB.вЂќ
Removing the DIMM A Memory Module
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
The DIMM A memory module is located under the keyboard.
1 Follow the procedures in "Before You Begin" on page 161.
2 Remove the hinge cover (see "Hinge Cover" on page 168).
3 Remove the keyboard (see "Keyboard" on page 169).
NOTE: It is not necessary to disconnect the keyboard cable from the memory
module cover.
4 Lift the memory module cover but do not remove it.
NOTICE: To prevent damage to the memory module connector, do not use tools to
spread the memory-module securing clips.
5 Use your fingertips to carefully spread apart the securing clips on each end
of the memory module connector until the module pops up.
172
Adding and Replacing Parts
6 Remove the module from the connector.
1
2
3
1
memory module cover
3
memory-module securing clips (2)
2
memory module (DIMM A)
Replacing the DIMM A Memory Module
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
1 Align the notch in the module edge connector with the tab in the
connector slot.
2 Slide the module firmly into the slot at a 45-degree angle, and rotate the
module down until it clicks into place. If you do not feel the click, remove
the module and reinstall it.
NOTE: If the memory module is not installed properly, the computer may not boot.
No error message indicates this failure.
Adding and Replacing Parts
173
1
2
1
tab
2
notch
3 Replace the memory module cover.
4 Replace the keyboard and hinge cover.
5 Insert the battery into the battery bay, or connect the AC adapter to your
computer and an electrical outlet.
6 Turn on the computer.
As the computer boots, it detects the additional memory and automatically
updates the system configuration information.
Confirm the amount of memory installed in the computer:
вЂў
WindowsВ® XP
вЂ“
вЂў
Windows Vistaв„ў
вЂ“
174
Right-click the My Computer icon on your desktop, then click
Propertiesв†’ General.
Click the Windows Vista Start button
then click Properties.
Adding and Replacing Parts
, right-click Computer, and
Removing the DIMM B Memory Module
The DIMM B memory module is located under the memory module cover on
the bottom of the computer.
1 Follow the procedures in "Before You Begin" on page 161.
2 Turn the computer upside-down, loosen the captive screw on the memory
module cover (see "Bottom View" on page 34), and remove the cover.
1
2
1
memory module/coin-cell battery
cover
2
captive screw
NOTICE: To prevent damage to the memory module connector, do not use tools to
spread the memory-module securing clips.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
3 Use your fingertips to carefully spread apart the securing clips on each end
of the memory module connector until the module pops up.
4 Remove the module from the connector.
Adding and Replacing Parts
175
1
1
securing clips (2)
2
2
memory module
Replacing the DIMM B Memory Module
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
1 Align the notch in the module edge connector with the tab in the
connector slot.
2 Slide the module firmly into the slot at a 45-degree angle, and rotate the
module down until it clicks into place. If you do not feel the click, remove
the module and reinstall it.
NOTE: If the memory module is not installed properly, the computer may not boot.
No error message indicates this failure.
176
Adding and Replacing Parts
1
2
1
tab
2
notch
NOTICE: If the memory module cover is difficult to close, remove the module and
reinstall it. Forcing the cover to close may damage your computer.
3 Replace the memory module cover.
4 Insert the battery into the battery bay, or connect the AC adapter to your
computer and an electrical outlet.
5 Turn on the computer.
As the computer boots, it detects the additional memory and automatically
updates the system configuration information.
Confirm the amount of memory installed in the computer:
вЂў
WindowsВ® XP
вЂ“
вЂў
Right-click the My Computer icon on your desktop, then click
Propertiesв†’ General.
Windows Vistaв„ў
вЂ“
Click the Windows Vista Start button
then click Properties.
, right-click Computer, and
Adding and Replacing Parts
177
Subscriber Identity Module
Subscriber Identity Modules (SIM) identify users uniquely through an
International Mobile Subscriber Identity.
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTE: Only GSM (HSDPA) type cards need a SIM. EVDO cards do not use a SIM.
1 Follow the procedures in "Before You Begin" on page 161.
2 In the battery bay, slide the SIM into the SIM compartment with the cutoff corner of the card facing away from the compartment.
1
1
178
2
battery bay
Adding and Replacing Parts
2
SIM
Wireless Mini-Cards
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE: To help prevent damage to the system board, remove the battery from the
battery bay before you begin working inside the computer.
If you ordered a wireless Mini-Card with your computer, the card is already
installed. Your computer supports three types of wireless Mini-Cards:
вЂў
Wireless Local Area Network (WLAN)
вЂў
Mobile Broadband or Wireless Wide Area Network (WWAN)
вЂў
Wireless Personal Area Network (WPAN)
Removing a WLAN Card
1 Follow the procedures in "Before You Begin" on page 161.
2 Turn the computer over.
3 Loosen the captive screws on the Mini-Card cover and remove the cover.
2
1
1
captive screws (2)
2
Mini-Card cover
Adding and Replacing Parts
179
4 Disconnect the antenna cables from the WLAN card.
2
1
1
antenna cable connectors (2)
2
WLAN card
5 Release the WLAN card by pushing the metal securing tabs toward the
back of the computer until the card pops up slightly.
6 Lift the WLAN card out of its system board connector.
180
Adding and Replacing Parts
2
1
3
1
metal securing tabs (2)
3
mylar sleeve
2
WLAN card
Replacing a WLAN Card
NOTICE: The connectors are keyed to ensure correct insertion. If you feel
resistance, check the connectors on the card and on the system board, and realign
the card.
NOTICE: To avoid damage to the WLAN card, never place cables under the card.
1 Insert the WLAN card connector into the system board connector labeled
"WLAN" at a 45-degree angle.
2 Press the other end of the WLAN card down into the securing tabs until
the card clicks into place.
Adding and Replacing Parts
181
3 Connect the appropriate antenna cables to the WLAN card that you are
installing:
If the WLAN card has two triangles on the label (white and black),
connect the white antenna cable to the connector labeled "main" (white
triangle), and connect the black antenna cable to the connector labeled
"aux" (black triangle).
If the WLAN card has three triangles on the label (white, black, and gray),
connect the white antenna cable to the white triangle, connect the black
antenna cable to the black triangle, and connect the gray antenna cable to
the gray triangle.
4 Secure unused antenna cables in the protective mylar sleeve.
5 Replace the Mini-Card cover and tighten the captive screws.
Removing a Mobile Broadband or WWAN Card
NOTE: WWAN is also available on an ExpressCard (see "Using ExpressCards" on
page 91).
1 Follow the procedures in "Before You Begin" on page 161.
2 Turn the computer over.
3 Loosen the captive screws on the Mini-Card cover and remove the cover.
182
Adding and Replacing Parts
2
1
1
captive screws (2)
2
Mini-Card cover
Adding and Replacing Parts
183
4 Disconnect the two antenna cables from the WWAN card.
2
1
1
antenna cable connectors (2)
2
WWAN card
5 Release the WWAN card by pushing the metal securing tabs toward the
back of the computer until the card pops up slightly.
6 Lift the WWAN card out of its system board connector.
184
Adding and Replacing Parts
2
1
3
1
metal securing tabs (2)
3
mylar sleeve
2
WWAN card
Replacing a WWAN Card
NOTICE: The connectors are keyed to ensure correct insertion. If you feel
resistance, check the connectors on the card and on the system board, and realign
the card.
NOTICE: To avoid damage to the WWAN card, never place cables under the card.
1 Insert the WWAN card connector into the system board connector labeled
"WWAN" at a 45-degree angle.
2 Press the other end of the WWAN card down into the securing tabs until
the card clicks into place.
Adding and Replacing Parts
185
3 Connect the black antenna cable with a gray stripe to the connector
labeled "aux" (black triangle) and connect the white antenna cable with a
gray stripe to the connector labeled "main" (white triangle).
4 Secure unused antenna cables in the protective mylar sleeve.
5 Replace the cover and tighten the captive screws.
Removing a WPAN Card
1 Follow the procedures in "Before You Begin" on page 161.
2 Turn the computer over.
3 Loosen the captive screws on the Mini-Card cover and remove the cover.
2
1
1
captive screws (2)
2
cover
4 Disconnect the blue antenna cable from the WPAN card.
5 Release the WPAN card by pushing the metal securing tabs toward the
back of the computer until the card pops up slightly.
6 Lift the WPAN card out of its system board connector.
186
Adding and Replacing Parts
Replacing a WPAN Card
NOTICE: The connectors are keyed to ensure correct insertion. If you feel
resistance, check the connectors on the card and on the system board, and realign
the card.
NOTICE: To avoid damage to the WPAN card, never place cables under the card.
1 Insert the WPAN card connector into the system board connector labeled
"WPAN" at a 45-degree angle.
2 Press the other end of the WPAN card down into the securing tabs until
the card clicks into place.
3 Connect the blue antenna cable to the WPAN card.
4 Secure unused antenna cables in the protective mylar sleeve.
5 Replace the Mini-Card cover and tighten the captive screws.
Flash Cache Module
The Flash Cache Module (FCM) is an internal flash drive that helps
Microsoft Windows Vistaв„ў improve the performance of your computer. If
you ordered an FCM with your computer, the card is already installed.
NOTE: WindowsВ® XP does not support an FCM. You can have an FCM installed
when running Windows XP but it will have no effect on your computerвЂ™s
performance.
Removing the FCM
1 Follow the procedures in "Before You Begin" on page 161.
2 Turn the computer over and remove the Mini-Card cover.
3 Ground yourself by touching one of the metal connectors on the back of
the computer.
NOTE: If you leave the area, ground yourself again when you return to the
computer.
4 Release the FCM by pushing the metal securing brackets away from the
card until the card pops up slightly.
5 Remove the FCM.
Adding and Replacing Parts
187
2
1
1
metal securing tabs (2)
2
FCM
Replacing the FCM
NOTICE: Install the FCM in the WWAN or WPAN slot. Do not install an FCM in the
WLAN card slot. Doing so may cause damage to your computer.
1 Insert the FCM connector into the system board connector at a 45-degree
angle.
2 Press the other end of the FCM down into the securing tabs until the card
clicks into place.
188
Adding and Replacing Parts
Internal Card With BluetoothВ® Wireless
Technology
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE: To help prevent damage to the system board, remove the battery from the
battery bay before you begin working inside the computer.
If you ordered an internal card with Bluetooth wireless technology with your
computer, it is already installed.
Removing the Card
1 Follow the procedures in "Before You Begin" on page 161.
2 Remove the hinge cover (see "Hinge Cover" on page 168).
3 Disconnect the cable on the card.
4 Grasp the connector end of the card and slide it out from under the
securing tabs.
Adding and Replacing Parts
189
3
4
2
1
1
securing tab
2
card
3
securing tab
4
cable
Coin-Cell Battery
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE: To help prevent damage to the system board, remove the battery from the
battery bay before you begin working inside the computer.
Removing the Coin-Cell Battery
1 Follow the procedures in "Before You Begin" on page 161.
2 Turn the computer over.
3 Loosen the captive screw on the memory module/coin-cell battery cover
(see "Bottom View" on page 34), and remove the cover.
4 Disconnect the coin-cell battery cable from the system board.
190
Adding and Replacing Parts
1
1
coin-cell battery
3
coin-cell battery cable connector
2
2
3
mylar sleeve
5 Slide the battery out of the mylar sleeve.
Adding and Replacing Parts
191
192
Adding and Replacing Parts
Dellв„ў QuickSet Features
14
NOTE: This feature may not be available on your computer.
Dell QuickSet provides you with easy access to configure or view the
following types of settings:
вЂў
Network connectivity
вЂў
Power management
вЂў
Display
вЂў
System information
Depending on what you want to do in Dell QuickSet, you can start it by
either clicking, double-clicking, or right-clicking the QuickSet icon in the
MicrosoftВ® WindowsВ® taskbar area. The taskbar area is located in the lowerright corner of your screen.
For more information about QuickSet, right-click the QuickSet icon and
select Help.
Dellв„ў QuickSet Features
193
194
Dellв„ў QuickSet Features
15
Traveling With Your Computer
Identifying Your Computer
вЂў
Attach a name tag or business card to the computer.
вЂў
Write down your Service Tag and store it in a safe place away from the
computer or carrying case. Use the Service Tag if you need to report a loss
or theft to law enforcement officials and to Dell.
вЂў
Create a file on the MicrosoftВ® WindowsВ® desktop called if_found. Place
information such as your name, address, and phone number in this file.
вЂў
Contact your credit card company and ask if it offers coded identification
tags.
Packing the Computer
вЂў
Remove any external devices attached to the computer and store them in a
safe place.
вЂў
Fully charge the main battery and any spare batteries that you plan to carry
with you.
вЂў
Shut down the computer.
вЂў
Disconnect the AC adapter.
NOTICE: When the display is closed, extraneous items on the keyboard or palm
rest could damage the display.
вЂў
Remove any extraneous items, such as paper clips, pens, and paper, from
the keyboard and palm rest and close the display.
вЂў
Use the optional Dell carrying case to pack the computer and its
accessories together safely.
вЂў
Avoid packing the computer with items such as shaving cream, colognes,
perfumes, or food.
NOTICE: If the computer has been exposed to extreme temperatures, allow it to
acclimate to room temperature for 1 hour before turning it on.
Traveling With Your Computer
195
вЂў
Protect the computer, the batteries, and the hard drive from hazards such
as extreme temperatures and overexposure to sunlight, dirt, dust, or
liquids.
вЂў
Pack the computer so that it does not slide around in the trunk of your car
or in an overhead storage compartment.
Travel Tips
NOTICE: Do not move the computer while using the optical drive to prevent loss of
data.
NOTICE: Do not check the computer as baggage.
вЂў
Consider disabling wireless activity on your computer to maximize battery
operating time. To disable wireless activity, use the wireless switch (see
"wireless switch" on page 27).
вЂў
Consider changing your power management options to maximize battery
operating time (see "Power Management Modes" on page 63).
вЂў
If you are traveling internationally, carry proof of ownershipвЂ”or of your
right to use the computer if it is company-ownedвЂ”to speed your passage
through customs. Investigate the customs regulations of the countries you
plan to visit, and consider acquiring an international carnet (also known as
a merchandise passport) from your government.
вЂў
Find out what type of electrical outlets are used in the countries you will
visit, and have appropriate power adapters.
вЂў
Check with your credit card company for information about the kinds of
emergency travel assistance it offers to users of portable computers.
Traveling by Air
NOTICE: Do not walk the computer through a metal detector. Send the computer
through an X-ray machine or have it hand-inspected.
196
вЂў
Ensure that you have a charged battery available in case you are asked to
turn on the computer.
вЂў
Prior to entering the airplane, verify that using a computer is permitted.
Some airlines forbid the use of electronic devices during flight. All airlines
forbid the use of electronic devices during takeoff and landing.
Traveling With Your Computer
Getting Help
16
Obtaining Assistance
CAUTION: If you need to remove the computer cover, first disconnect the modem
cable and all power cables from electrical outlets.
If you experience a problem with your computer, you can complete the
following steps to diagnose and troubleshoot the problem:
1 See "Troubleshooting Software and Hardware Problems" on page 149 for
information and procedures that pertain to the problem your computer is
experiencing.
2 See "Dell Diagnostics" on page 113 for procedures on how to run Dell
Diagnostics.
3 Fill out the "Diagnostics Checklist" on page 202.
4 Use Dell's extensive suite of online services available at Dell Support
(support.dell.com) for help with installation and troubleshooting
procedures. See "Online Services" on page 198 for a more extensive list of
Dell Support online.
5 If the preceding steps have not resolved the problem, see "Contacting
Dell" on page 203.
NOTE: Call Dell Support from a telephone near or at the computer so that the
support staff can assist you with any necessary procedures.
NOTE: Dell's Express Service Code system may not be available in all countries.
When prompted by Dell's automated telephone system, enter your Express
Service Code to route the call directly to the proper support personnel. If you
do not have an Express Service Code, open the Dell Accessories folder,
double-click the Express Service Code icon, and follow the directions.
For instructions on using Dell Support, see "Technical Support and Customer
Service" on page 198.
NOTE: Some of the following services are not always available in all locations
outside the continental U.S. Call your local Dell representative for information on
availability.
Getting Help
197
Technical Support and Customer Service
Dell's support service is available to answer your questions about Dellв„ў
hardware. Our support staff uses computer-based diagnostics to provide fast,
accurate answers.
To contact Dell's support service, see "Before You Call" on page 201, and then
see "Contacting Dell" on page 203.
DellConnect
DellConnect is a simple online access tool that allows a Dell service and
support associate to access your computer through a broadband connection,
diagnose your problem and repair it all under your supervision. For more
information, go to support.dell.com and click DellConnect.
Online Services
You can learn about Dell products and services on the following websites:
www.dell.com
www.dell.com/ap (Asian/Pacific countries only)
www.dell.com/jp (Japan only)
www.euro.dell.com (Europe only)
www.dell.com/la (Latin American and Caribbean countries)
www.dell.ca (Canada only)
You can access Dell Support through the following websites and e-mail
addresses:
вЂў
Dell Support websites
support.dell.com
support.jp.dell.com (Japan only)
support.euro.dell.com (Europe only)
вЂў
Dell Support e-mail addresses
mobile_support@us.dell.com
support@us.dell.com
198
Getting Help
la-techsupport@dell.com (Latin America and Caribbean countries only)
apsupport@dell.com (Asian/Pacific countries only)
вЂў
Dell Marketing and Sales e-mail addresses
apmarketing@dell.com (Asian/Pacific countries only)
sales_canada@dell.com (Canada only)
вЂў
Anonymous file transfer protocol (FTP)
ftp.dell.com
Log in as user: anonymous, and use your e-mail address as your password.
AutoTech Service
Dell's automated support serviceвЂ”AutoTechвЂ”provides recorded answers to
the questions most frequently asked by Dell customers about their portable
and desktop computers.
When you call AutoTech, use your touch-tone telephone to select the
subjects that correspond to your questions. For the telephone number to call
for your region, see "Contacting Dell" on page 203.
Automated Order-Status Service
To check on the status of any Dell products that you have ordered, you can go
to support.dell.com, or you can call the automated order-status service. A
recording prompts you for the information needed to locate and report on
your order. For the telephone number to call for your region, see "Contacting
Dell" on page 203.
Problems With Your Order
If you have a problem with your order, such as missing parts, wrong parts, or
incorrect billing, contact Dell for customer assistance. Have your invoice or
packing slip handy when you call. For the telephone number to call for your
region, see "Contacting Dell" on page 203.
Getting Help
199
Product Information
If you need information about additional products available from Dell, or if
you would like to place an order, visit the Dell website at www.dell.com. For
the telephone number to call for your region or to speak to a sales specialist,
see "Contacting Dell" on page 203.
Returning Items for Warranty Repair or Credit
Prepare all items being returned, whether for repair or credit, as follows:
1 Call Dell to obtain a Return Material Authorization Number, and write it
clearly and prominently on the outside of the box.
For the telephone number to call for your region, see "Contacting Dell" on
page 203.
2 Include a copy of the invoice and a letter describing the reason for the
return.
3 Include a copy of the Diagnostics Checklist (see "Diagnostics Checklist"
on page 202), indicating the tests that you have run and any error
messages reported by the Dell Diagnostics (see "Dell Diagnostics" on
page 113).
4 Include any accessories that belong with the item(s) being returned
(power cables, software floppy disks, guides, and so on) if the return is for
credit.
5 Pack the equipment to be returned in the original (or equivalent) packing
materials.
You are responsible for paying shipping expenses. You are also responsible for
insuring any product returned, and you assume the risk of loss during
shipment to Dell. Collect On Delivery (C.O.D.) packages are not accepted.
Returns that are missing any of the preceding requirements will be refused at
DellвЂ™s receiving dock and returned to you.
200
Getting Help
Before You Call
NOTE: Have your Express Service Code ready when you call. The code helps DellвЂ™s
automated-support telephone system direct your call more efficiently. You may also
be asked for your Service Tag (located on the back or bottom of your computer).
Remember to fill out the Diagnostics Checklist (see "Diagnostics Checklist"
on page 202). If possible, turn on your computer before you call Dell for
assistance and call from a telephone at or near the computer. You may be
asked to type some commands at the keyboard, relay detailed information
during operations, or try other troubleshooting steps possible only at the
computer itself. Ensure that the computer documentation is available.
CAUTION: Before working inside your computer, follow the safety instructions in
your Product Information Guide.
Getting Help
201
Diagnostics Checklist
Name:
Date:
Address:
Phone number:
Service Tag (bar code on the back or bottom of the computer):
Express Service Code:
Return Material Authorization Number (if provided by Dell support technician):
Operating system and version:
Devices:
Expansion cards:
Are you connected to a network? Yes No
Network, version, and network adapter:
Programs and versions:
See your operating system documentation to determine the contents of the
systemвЂ™s start-up files. If the computer is connected to a printer, print each file.
Otherwise, record the contents of each file before calling Dell.
Error message, beep code, or diagnostic code:
Description of problem and troubleshooting procedures you performed:
202
Getting Help
Contacting Dell
For customers in the United States, call 800-WWW.DELL (800.999.3355).
NOTE: If you do not have an active Internet connection, you can find contact
information on your purchase invoice, packing slip, bill, or Dell product catalog.
Dell provides several online and telephone-based support and service options.
Availability varies by country and product, and some services may not be
available in your area. To contact Dell for sales, technical support, or
customer service issues:
1 Visit support.dell.com.
2 Verify your country or region in the Choose A Country/Region drop-down
menu at the bottom of the page.
3 Click Contact Us on the left side of the page.
4 Select the appropriate service or support link based on your need.
5 Choose the method of contacting Dell that is convenient for you.
Getting Help
203
204
Getting Help
17
Specifications
NOTE: Offerings may vary by region. For more information regarding the
configuration of your computer, click Startв†’ Help and Support and select the
option to view information about your computer.
Processor
Processor type
IntelВ® Coreв„ў 2 Duo
L1 cache
32 KB per instruction
32-KB data cache per core
L2 cache
2-MB or 4-MB per core depending on model
Front side bus frequency
533 MHz, 667 MHz and 800 MHz
System Information
System chipset
Intel 965 Express Chipset Family
Data bus width
64 bits
DRAM bus width
dual-channel (2) 64-bit buses
Processor address bus width
32 bits
Flash EPROM
1 MB
Graphics bus
PCI-E X16
PCI bus
(PCI-Express used for video
controllers)
32 bits
x16
ExpressCard
NOTE: The ExpressCard slot is designed only for ExpressCards. It does NOT support
PC Cards.
NOTE: PCMCIA may not be available in some regions.
ExpressCard controller
Intel ICH8M
ExpressCard connector
one ExpressCard slot (54 mm)
Specifications
205
ExpressCard (continued)
Cards supported
ExpressCard/34 (34 mm)
ExpressCard/54 (54 mm)
1.5 V and 3.3 V
ExpressCard connector size
26 pins
8-in-1 Memory Card Reader
8-in-1 memory card controller
Ricoh R5C833
8-in-1 memory card connector
8-in-1 combo card connector
Cards supported
вЂў Secure Digital (SD)
вЂў SDIO
вЂў MultiMediaCard (MMC)
вЂў Memory Stick
вЂў Memory Stick PRO
вЂў xD-Picture Card
вЂў Hi Speed-SD
вЂў Hi Density-SD
Memory
Memory module connector
two user-accessible SoDIMM connectors
Memory module capacities
512 MB, 1 GB, 2 GB
Memory type
667-MHz SoDIMM DDR2
Minimum memory
512 MB
Maximum memory
4 GB
NOTE: In order to take advantage of the dual-channel bandwidth capability, both
memory slots must be populated and must match in size.
NOTE: The available memory displayed does not reflect the complete maximum
memory installed because some memory is reserved for system files.
206
Specifications
Ports and Connectors
Audio
microphone connector, stereo
headphone/speakers connector
IEEE 1394
4-pin serial connector
Consumer IR
sensor compatible with Philips RC6 (receive
only)
Mini-Card
three Type IIIA Mini-Card slots
Modem
RJ-11 port
Network adapter
RJ-45 port
S-video TV-out
7-pin mini-DIN connector (optional S-video
to composite video adapter cable)
USB
four 4-pin USB 2.0-compliant connector
Video
15-hole connector
Communications
Modem:
Type
v.92 56K MDC
Controller
softmodem
Interface
Intel High-Definition Audio
Network adapter
10/100 Ethernet LAN on system board
Wireless
internal WLAN, WWAN, WPAN MiniCards
WWAN ExpressCard
BluetoothВ® wireless technology
Specifications
207
Video
NOTE: Optional video controller upgrades are available for your computer subject to
availability at the time of purchase. To determine the configuration of your computer,
see "Determining Your ComputerвЂ™s Configuration" on page 21.
Video type:
integrated on system board
Video controller
Intel 965 GM
Video memory
size of shared video memory is up to 358 MB
LCD interface
LVDS
TV support
NTSC or PAL in S-video, composite, and
component modes
Video type:
discrete video card
Data bus
PCI Express X16
Video controller
nVIDIA GeForce 8400M GS or nVIDIA
GeForce 8600M GT
Video memory
128 MB (GeForce 8400M GS) or 256 MB
(GeForce 8600M GT)
LCD interface
LVDS
TV support
NTSC or PAL in S-video, composite, and
component modes
Audio
Audio type
two-channel high-definition stereo
Audio controller
Sigmatel STAC9205 High Definition Audio
codec
Stereo conversion
24-bit (analog-to-digital and digital-toanalog)
Interfaces:
Internal
Intel High Definition Audio
External
microphone-in connector, stereo
headphones/speakers connector
Speaker
two 4-ohm speakers
Internal speaker amplifier
2 Watts per channel into 4 ohms
208
Specifications
Audio (continued)
Internal microphone
Dual digital microphone array
Volume controls
program menus, media control buttons
Display
Type (active-matrix TFT)
15.4-inch WXGA
15.4-inch WXGA with TrueLife
15.4-inch WXGA+ with TrueLife
15.4-inch WSXGA+ with TrueLife
Dimensions:
Height
222.5 mm (8.8 inches)
Width
344.5 mm (13.6 inches)
Diagonal
391.2 mm (15.4 inches)
Maximum resolutions:
WXGA
1280 x 800 at 262 K colors
WXGA with TrueLife
1280 x 800 at 262 K colors
WXGA+ with TrueLife
1440 x 900 at 262 K colors
WSXGA+ with TrueLife
1680 x 1050 at 262 K colors
Refresh rate
60 Hz
Operating angle
0В° (closed) to 155В°
Viewing angles:
Horizontal
В±40В° (WXGA)
В±40В° (WXGA with TrueLife)
В±55В° (WXGA+ with TrueLife)
В±60В° (WSXGA+ with TrueLife)
Vertical
+15В°/вЂ“30В° (WXGA)
+15В°/вЂ“30В° (WXGA with TrueLife)
В±45В° (WXGA+ with TrueLife)
+40В°/вЂ“50В° (WSXGA+ with TrueLife)
Specifications
209
Display (continued)
Pixel pitch:
WXGA
0.258 mm
WXGA with TrueLife
0.258 mm
WXGA+ with TrueLife
0.2304 mm
WSXGA+ with TrueLife
0.197 mm
Controls
brightness can be controlled through
keyboard shortcuts (see "Display Functions"
on page 54)
Keyboard
Number of keys
87 (U.S. and Canada); 88 (Europe); 91
(Japan)
Layout
QWERTY/AZERTY/Kanji
Touch Pad
X/Y position resolution
(graphics table mode)
240 cpi
Size:
Width
71.7-mm (2.8-in) sensor-active area
Height
34.0-mm (1.3-in) rectangle
Battery
Type
9-cell "smart" lithium ion
6-cell "smart" lithium ion
Dimensions:
Depth
67.6 mm (2.66 in) (9 cell)
47.5 mm (1.87 in) (6 cell)
210
Height
20.4 mm (0.8 in)
Width
209.9 mm (8.26 in)
Specifications
Battery (continued)
Weight
0.48 kg (1.06 lb) (9 cell)
0.33 kg (0.7 lb) (6 cell)
Voltage
11.1 VDC
Charge time (approximate):
Computer off
Operating time
4 hours
Battery operating time varies depending on
operating conditions and can be significantly
reduced under certain power-intensive
conditions (see "Power Problems" on
page 137).
See "Using a Battery" on page 59 for more
information on battery life.
Life span (approximate)
300 discharge/charge cycles
Temperature range:
Operating
0В° to 35В°C (32В° to 95В°F)
Storage
вЂ“40В° to 65В°C (вЂ“40В° to 149В°F)
Coin-cell battery
CR-2032
AC Adapter
Input voltage
90вЂ“264 VAC
Input current (maximum)
1.5 A
Input frequency
47вЂ“63 Hz
Output current (65 W)
4.34 A (maximum at 4-second pulse)
3.34 A (continuous)
Output current (90 W)
5.62 A (maximum at 4-second pulse)
4.62 A (continuous)
NOTE: If your computer has the discrete video configuration, you must use the 90 W
AC adapter that is shipped with your computer. Using the incorrect AC adapter will
prevent optimal system performance and produce a BIOS warning.
Output power
65 W, 90 W
Rated output voltage
19.5 +/вЂ“ 1.0 VDC
Specifications
211
AC Adapter (continued)
Dimensions (65 W):
Height
28.2 mm (1.11 in)
Width
57.9 mm (2.28 in)
Depth
137.2 mm (5.4 in)
Weight (with cables)
0.4 kg (0.9 lb)
Dimensions (90 W):
Height
34.2 mm (1.34 in)
Width
60.8 mm (2.39 in)
Depth
153.4 mm (6.0 in)
Weight (with cables)
0.46 kg (1.01 lb)
Temperature range:
Operating
0В° to 35В°C (32В° to 95В°F)
Storage
вЂ“40В° to 65В°C (вЂ“40В° to 149В°F)
Physical
Height
42 mm (1.65 in)
Width
358.7 mm (14.12 in)
Depth
269 mm (10.59 in)
Weight (with 6-cell battery):
Configurable to less than
3.0 kg (6.61 lb)
Environmental
Temperature range:
Operating
0В° to 35В°C (32В° to 95В°F)
Storage
вЂ“40В° to 65В°C (вЂ“40В° to 149В°F)
Relative humidity (maximum):
212
Operating
10% to 90% (noncondensing)
Storage
5% to 95% (noncondensing)
Specifications
Environmental (continued)
Maximum vibration (using a random
vibration spectrum that simulates
user environment):
Operating
0.66 GRMS
Storage
1.3 GRMS
Maximum shock (Measured with
hard drive in operating status and a
2-ms half-sine pulse for operating.
Also measured with hard drive in
head-parked position and a 2-ms
halfsine pulse for storage):
Operating
142 G
Storage
163 G
Altitude (maximum):
Operating
вЂ“15.2 to 3048 m (вЂ“50 to 10,000 ft)
Storage
вЂ“15.2 to 10,668 m (вЂ“50 to 35,000 ft)
Airborne contaminant level
C2 or lower as defined by ISA-S71.04-1985
Camera (Optional)
Still Resolution
2 Mega-Pixel
Video Resolution
640 x 480 at 30 fps
Camera activation
Desktop icon
Specifications
213
214
Specifications
Appendix
18
Using the System Setup Program
NOTE: Your operating system may automatically configure most of the options
available in the system setup program, thus overriding options that you set through
the system setup program (an exception is the External Hot Key option, which you
can disable or enable only through the system setup program). For more information
on configuring features for your operating system, access the Help and Support
Center (see "Microsoft Windows XP and Windows Vistaв„ў Help and Support Center"
on page 16).
You can use system setup as follows:
вЂў
To set or change user-selectable features such as your computer password
вЂў
To verify information about the computer's current configuration such as
the amount of system memory
After you set up the computer, run system setup to familiarize yourself with
your system configuration information and optional settings. You may want
to write down the information for future reference.
The system setup screens display the current setup information and settings
for your computer, such as:
вЂў
System configuration
вЂў
Boot order
вЂў
Boot (start-up) configuration
вЂў
Basic device configuration settings
вЂў
System security and hard drive password settings
NOTE: Unless you are an expert computer user or are directed to do so by Dell
technical support, do not change the system setup settings. Certain changes might
make your computer work incorrectly.
Appendix
215
Viewing the System Setup Screen
1 Turn on (or restart) your computer.
2 When the DELL logo appears, press <F2> immediately.
If you wait too long and the Microsoft Windows logo appears, continue to
wait until you see the Windows desktop, then shut down your computer
and try again.
System Setup Screen
NOTE: For information about a specific item on a system setup screen, highlight the
item and see the Help area on the screen.
On each screen, the system setup options are listed at the left. To the right of
each option is the setting or value for that option. You can change settings
that appear as white type on the screen. Options or values that you cannot
change (because they are determined by the computer) appear less bright.
The upper-right corner of the screen displays help information for the
currently highlighted option; the lower-right corner displays information
about the computer. System setup key functions are listed across the bottom
of the screen.
Commonly Used Options
Certain options require that you reboot the computer for new settings to take
effect.
Changing the Boot Sequence
The boot sequence, or boot order, tells the computer where to look to find the
software needed to start the operating system. You can control the boot
sequence and enable/disable devices using the Boot Order page of the system
setup program.
NOTE: To change the boot sequence on a one-time-only basis, see "Performing a
One-Time Boot" on page 217.
The Boot Order page displays a general list of the bootable devices that may
be installed in your computer, including but not limited to the following:
216
вЂў
Diskette Drive
вЂў
Internal HDD
Appendix
вЂў
USB Storage Device
вЂў
CD/DVD/CD-RW drive
вЂў
Modular bay HDD
NOTE: Only devices that are preceded by a number are bootable.
During the boot routine, the computer starts at the top of the list and scans
each enabled device for the operating system start-up files. When the
computer finds the files, it stops searching and starts the operating system.
To control the boot devices, select (highlight) a device by pressing the downarrow or up-arrow key, and then enable or disable the device or change its
order in the list.
вЂў
To enable or disable a device, highlight the item and press the space bar.
Enabled items are preceded by a number; disabled items are not preceded
by a number.
вЂў
To reorder a device in the list, highlight the device and press <u> to move
the device up the list or <d> to move a device down the list.
Boot sequence changes take effect as soon as you save the changes and exit
the system setup program.
Performing a One-Time Boot
You can set a one-time-only boot sequence without entering the system setup
program (you can also use this procedure to boot the Dell Diagnostics on the
diagnostics utility partition on your hard drive).
1 Shut down the computer through the Start menu.
2 Connect the computer to an electrical outlet.
3 Turn on the computer. When the DELL logo appears, press <F12>
immediately.
If you wait too long and the Windows logo appears, continue to wait until
you see the Windows desktop, then shut down your computer and try
again.
4 When the boot device list appears, highlight the device from which you
want to boot and press <Enter>.
The computer boots to the selected device.
The next time you reboot the computer, the previous boot order is restored.
Appendix
217
Cleaning Your Computer
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions located in the Product Information Guide.
Computer, Keyboard, and Display
CAUTION: Before you clean your computer, disconnect the computer from the
electrical outlet and remove any installed batteries. Clean your computer with a
soft cloth dampened with water. Do not use liquid or aerosol cleaners, which may
contain flammable substances.
вЂў
Use a can of compressed air to remove dust from between the keys on the
keyboard and to remove any dirt or lint from the display.
NOTICE: To help prevent damage to the computer or display, do not spray cleaning
solution directly onto the display. Only use products specifically designed for
cleaning displays, and follow the instructions that are included with the product.
вЂў
Moisten a soft, lint-free cloth with either water or a display cleaner. Do not
use alcohol or an ammonia-based cleaner. Wipe the display gently working
from the center to the edges until it is clean and any fingerprints are
removed. Do not use excessive pressure.
NOTICE: To prevent damage to the antiglare coating, do not wipe the display with
soap or alcohol.
вЂў
Moisten a soft, lint-free cloth with water and wipe the computer and
keyboard. Do not allow water from the cloth to seep between the touch
pad and the surrounding palm rest.
вЂў
To clean your monitor screen, lightly dampen a soft, clean cloth with water.
You can also use a special screen-cleaning tissue or solution suitable for the
monitorвЂ™s antistatic coating.
вЂў
Wipe the keyboard, computer, and monitor plastics with a soft cleaning
cloth moistened with a solution of three parts water and one part
dishwashing detergent.
Do not soak the cloth or let water drip inside your computer or keyboard.
218
Appendix
Touch Pad
1 Shut down and turn off your computer (see "Turning Off Your Computer"
on page 161).
2 Disconnect any attached devices from the computer and from their
electrical outlets.
3 Remove any installed batteries (see "Battery Performance" on page 59).
4 Moisten a soft, lint-free cloth with water, and wipe it gently across the
surface of the touch pad. Do not allow water from the cloth to seep
between the touch pad and the surrounding palm rest.
Mouse
NOTICE: Disconnect the mouse from the computer before cleaning the mouse
If your screen cursor skips or moves abnormally, clean the mouse.
Cleaning a Non-Optical Mouse
1 Clean the outside casing of the mouse with a cloth moistened with a mild
cleaning solution.
2 Turn the retainer ring on the underside of your mouse counterclockwise,
and then remove the ball.
3 Wipe the ball with a clean, lint-free cloth.
4 Blow carefully into the ball cage or use a can of compressed air to dislodge
dust and lint.
5 If the rollers inside the ball cage are dirty, clean the rollers with a cotton
swab moistened lightly with isopropyl alcohol.
6 Recenter the rollers in their channels if they are misaligned. Ensure that no
fibers from the swab are left on the rollers.
7 Replace the ball and retainer ring, and turn the retainer ring clockwise
until it clicks into place.
Cleaning an Optical Mouse
Clean the outside casing of the mouse with a cloth moistened with a mild
cleaning solution.
Appendix
219
Media
NOTICE: Always use compressed air to clean the lens in the optical drive, and
follow the instructions that come with the compressed air product. Never touch the
lens in the drive.
If you notice problems, such as skipping, with the playback quality of your
media, try cleaning the discs.
1 Hold the disc by its outer edge. You can also touch the inside edge of the
center hole.
NOTICE: To help prevent damage to the surface, do not wipe in a circular motion
around the disc.
2 With a soft, lint-free cloth, gently wipe the bottom of the disc (the
unlabeled side) in a straight line from the center to the outer edge of the
disc.
For stubborn dirt, try using water or a diluted solution of water and mild
soap. You can also purchase commercial products that clean discs and
provide some protection from dust, fingerprints, and scratches. Cleaning
products for CDs are also safe to use on DVDs.
Dell Technical Support Policy (U.S. Only)
Technician assisted technical support requires the cooperation and
participation of the customer in the troubleshooting process and provides for
restoration of the operating system, software programs, and hardware drivers
to the original default configuration as shipped from Dell, as well as the
verification of appropriate functionality of the computer and all Dell-installed
hardware. In addition to this technician assisted technical support, online
technical support is available at support.dell.com. Additional technical
support options may be available for purchase.
220
Appendix
Dell provides limited technical support for the computer and any "Dellinstalled" software and peripherals1. Support for third-party software and
peripherals is provided by the original manufacturer, including those
purchased and/or installed through Dell Software and Peripherals, Readyware,
and Custom Factory Integration2.
1
Repair services are provided pursuant to the terms and conditions of your limited
warranty and any optional support service contract purchased with the computer.
2
All Dell-standard components included in a Custom Factory Integration (CFI) project
are covered by the standard Dell limited warranty for your computer. However, Dell
also extends a parts replacement program to cover all nonstandard, third-party hardware components integrated through CFI for the duration of the computerвЂ™s service
contract.
Definition of "Dell-Installed" Software and Peripherals
Dell-installed software includes the operating system and some of the
software programs that are installed on the computer during the
manufacturing process (Microsoft Office, Norton Antivirus, etc).
Dell-installed peripherals include any internal expansion cards, or
Dell-branded module bay or ExpressCard accessories. In addition, any Dellbranded monitors, keyboards, mice, speakers, microphones for telephonic
modems, docking stations/port replicators, networking products, and all
associated cabling are included.
Definition of "Third-Party" Software and Peripherals
Third-party software and peripherals include any peripheral, accessory, or
software program sold by Dell not under the Dell brand (printers, scanners,
cameras, games, etc). Support for all third-party software and peripherals is
provided by the original manufacturer of the product.
FCC Notice (U.S. Only)
FCC Class B
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the manufacturerвЂ™s instruction
manual, may cause interference with radio and television reception. This
equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules.
Appendix
221
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
вЂў
This device may not cause harmful interference.
вЂў
This device must accept any interference received, including interference
that may cause undesired operation.
NOTICE: The FCC regulations provide that changes or modifications not expressly
approved by Dell Inc. could void your authority to operate this equipment.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference with radio or television reception, which can be
determined by turning the equipment off and on, you are encouraged to try
to correct the interference by one or more of the following measures:
вЂў
Reorient the receiving antenna.
вЂў
Relocate the system with respect to the receiver.
вЂў
Move the system away from the receiver.
вЂў
Plug the system into a different outlet so that the system and the receiver
are on different branch circuits.
If necessary, consult a representative of Dell Inc. or an experienced
radio/television technician for additional suggestions.
The following information is provided on the device or devices covered in this
document in compliance with the FCC regulations:
Product name:
Dellв„ў Vostroв„ў 1500
Model number:
PP22L
Company name:
Dell Inc.
Worldwide Regulatory Compliance & Environmental
Affairs
One Dell Way
Round Rock, TX 78682 USA
512-338-4400
222
Appendix
Macrovision Product Notice
This product incorporates copyright protection technology that is protected
by U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Macrovision, and is intended
for home and other limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.
Appendix
223
224
Appendix
Glossary
Terms in this Glossary are provided for informational purposes only and may
or may not describe features included with your particular computer.
A
AC вЂ” alternating current вЂ” The form of electricity that powers your computer when
you plug the AC adapter power cable in to an electrical outlet.
ACPI вЂ” advanced configuration and power interface вЂ” A power management
specification that enables MicrosoftВ® WindowsВ® operating systems to put a computer
in standby or hibernate mode to conserve the amount of electrical power allocated to
each device attached to the computer.
AGP вЂ” accelerated graphics port вЂ” A dedicated graphics port that allows system
memory to be used for video-related tasks. AGP delivers a smooth, true-color video
image because of the faster interface between the video circuitry and the computer
memory.
AHCI вЂ” Advanced Host Controller Interface вЂ” An interface for a SATA hard drive
Host Controller which allows the storage driver to enable technologies such as Native
Command Queuing (NCQ) and hot plug.
ALS вЂ” ambient light sensor вЂ” A feature that helps to control display brightness.
antivirus software вЂ” A program designed to identify, quarantine, and/or delete viruses
from your computer.
ASF вЂ” alert standards format вЂ” A standard to define a mechanism for reporting
hardware and software alerts to a management console. ASF is designed to be
platform- and operating system-independent.
B
battery life span вЂ” The length of time (years) during which a portable computer
battery is able to be depleted and recharged.
battery operating time вЂ” The length of time (minutes or hours) that a portable
computer battery powers the computer.
BD-R вЂ” Blu-ray Disc recordable refers to two optical disc formats that can be
recorded with an optical disc recorder. BD-R discs can be written to once.
BD-RE вЂ” Blu-ray Disc RE can be erased and re-recorded multiple times.
Glossary
225
BIOS вЂ” basic input/output system вЂ” A program (or utility) that serves as an
interface between the computer hardware and the operating system. Unless you
understand what effect these settings have on the computer, do not change them. Also
referred to as system setup.
bit вЂ” The smallest unit of data interpreted by your computer.
BluetoothВ® wireless technology вЂ” A wireless technology standard for short-range
(9 m [29 feet]) networking devices that allows for enabled devices to automatically
recognize each other.
boot sequence вЂ” Specifies the order of the devices from which the computer
attempts to boot.
bootable CD вЂ” A CD that you can use to start your computer. In case your hard drive
is damaged or your computer has a virus, ensure that you always have a bootable CD
or floppy disk available. Your Drivers and Utilities media is a bootable CD.
bootable disk вЂ” A disk that you can use to start your computer. In case your hard
drive is damaged or your computer has a virus, ensure that you always have a bootable
CD or floppy disk available.
bps вЂ” bits per second вЂ” The standard unit for measuring data transmission speed.
BTU вЂ” British thermal unit вЂ” A measurement of heat output.
bus вЂ” A communication pathway between the components in your computer.
bus speed вЂ” The speed, given in MHz, that indicates how fast a bus can transfer
information.
byte вЂ” The basic data unit used by your computer. A byte is usually equal to 8 bits.
C
C вЂ” Celsius вЂ” A temperature measurement scale where 0В° is the freezing point and
100В° is the boiling point of water.
cache вЂ” A special high-speed storage mechanism which can be either a reserved
section of main memory or an independent high-speed storage device. The cache
enhances the efficiency of many processor operations.
L1 cache вЂ” Primary cache stored inside the processor.
L2 cache вЂ” Secondary cache which can either be external to the processor or
incorporated into the processor architecture.
carnet вЂ” An international customs document that facilitates temporary imports into
foreign countries. Also known as a merchandise passport.
226
Glossary
CD-R вЂ” CD recordable вЂ” A recordable version of a CD. Data can be recorded only
once onto a CD-R. Once recorded, the data cannot be erased or written over.
CD-RW вЂ” CD rewritable вЂ” A rewritable version of a CD. Data can be written to a
CD-RW disc, and then erased and written over (rewritten).
CD-RW drive вЂ” A drive that can read CDs and write to CD-RW (rewritable CDs)
and CD-R (recordable CDs) discs. You can write to CD-RW discs multiple times, but
you can write to CD-R discs only once.
CD-RW/DVD drive вЂ” A drive, sometimes referred to as a combo drive, that can read
CDs and DVDs and write to CD-RW (rewritable CDs) and CD-R (recordable CDs)
discs. You can write to CD-RW discs multiple times, but you can write to CD-R discs
only once.
clock speed вЂ” The speed, given in MHz, that indicates how fast computer
components that are connected to the system bus operate.
CMOS вЂ” A type of electronic circuit. Computers use a small amount of batterypowered CMOS memory to hold date, time, and system setup options.
COA вЂ” Certificate of Authenticity вЂ” The Windows alpha-numeric code located on a
sticker on your computer. Also referred to as the Product Key or
Product ID.
Consumer IR вЂ” A port that allows you to transfer data between the computer and
infrared-compatible devices without using a cable connection.
Control Panel вЂ” A Windows utility that allows you to modify operating system and
hardware settings, such as display settings.
controller вЂ” A chip that controls the transfer of data between the processor and
memory or between the processor and devices.
CRIMM вЂ” continuity rambus in-line memory module вЂ” A special module that has
no memory chips and is used to fill unused RIMM slots.
cursor вЂ” The marker on a display or screen that shows where the next keyboard, touch
pad, or mouse action will occur. It often is a blinking solid line, an underline character,
or a small arrow.
D
DDR SDRAM вЂ” double-data-rate SDRAM вЂ” A type of SDRAM that doubles the
data burst cycle, improving system performance.
DDR2 SDRAM вЂ” double-data-rate 2 SDRAM вЂ” A type of DDR SDRAM that uses a
4-bit prefetch and other architectural changes to boost memory speed to over
400 MHz.
Glossary
227
device вЂ” Hardware such as a disk drive, printer, or keyboard that is installed in or
connected to your computer.
device driver вЂ” See driver.
DIMM вЂ” dual in-line memory module вЂ” A circuit board with memory chips that
connects to a memory module on the system board.
DIN connector вЂ” A round, six-pin connector that conforms to DIN (Deutsche
Industrie-Norm) standards; it is typically used to connect PS/2 keyboard or mouse
cable connectors.
disk striping вЂ” A technique for spreading data over multiple disk drives. Disk striping
can speed up operations that retrieve data from disk storage. Computers that use disk
striping generally allow the user to select the data unit size or stripe width.
DMA вЂ” direct memory access вЂ” A channel that allows certain types of data transfer
between RAM and a device to bypass the processor.
DMTF вЂ” Distributed Management Task Force вЂ” A consortium of hardware and
software companies who develop management standards for distributed desktop,
network, enterprise, and Internet environments.
domain вЂ” A group of computers, programs, and devices on a network that are
administered as a unit with common rules and procedures for use by a specific group
of users. A user logs on to the domain to gain access to the resources.
DRAM вЂ” dynamic random-access memory вЂ” Memory that stores information in
integrated circuits containing capacitors.
driver вЂ” Software that allows the operating system to control a device such as a
printer. Many devices do not work properly if the correct driver is not installed in the
computer.
DSL вЂ” Digital Subscriber Line вЂ” A technology that provides a constant, high-speed
Internet connection through an analog telephone line.
dual-core вЂ” An IntelВ® technology in which two physical computational units exist
inside a single processor package, thereby increasing computing efficiency and multitasking ability.
dual display mode вЂ” A display setting that allows you to use a second monitor as an
extension of your display. Also referred to as extended display mode.
DVD-R вЂ” DVD recordable вЂ” A recordable version of a DVD. Data can be recorded
only once onto a DVD-R. Once recorded, the data cannot be erased or written over.
DVD+RW вЂ” DVD rewritable вЂ” A rewritable version of a DVD. Data can be written
to a DVD+RW disc, and then erased and written over (rewritten). (DVD+RW
technology is different from DVD-RW technology.)
228
Glossary
DVD+RW drive вЂ” drive that can read DVDs and most CD media and write to
DVD+RW (rewritable DVDs) discs.
DVI вЂ” digital video interface вЂ” A standard for digital transmission between a
computer and a digital video display.
E
ECC вЂ” error checking and correction вЂ” A type of memory that includes special
circuitry for testing the accuracy of data as it passes in and out of memory.
ECP вЂ” extended capabilities port вЂ” A parallel connector design that provides
improved bidirectional data transmission. Similar to EPP, ECP uses direct memory
access to transfer data and often improves performance.
EIDE вЂ” enhanced integrated device electronics вЂ” An improved version of the IDE
interface for hard drives and CD drives.
EMI вЂ” electromagnetic interference вЂ” Electrical interference caused by
electromagnetic radiation.
ENERGY STARВ® вЂ” Environmental Protection Agency requirements that decrease
the overall consumption of electricity.
EPP вЂ” enhanced parallel port вЂ” A parallel connector design that provides
bidirectional data transmission.
ESD вЂ” electrostatic discharge вЂ” A rapid discharge of static electricity. ESD can
damage integrated circuits found in computer and communications equipment.
expansion card вЂ” A circuit board that installs in an expansion slot on the system
board in some computers, expanding the capabilities of the computer. Examples
include video, modem, and sound cards.
expansion slot вЂ” A connector on the system board (in some computers) where you
insert an expansion card, connecting it to the system bus.
ExpressCard вЂ” A removable I/O card adhering to the PCMCIA standard. Modems
and network adapters are common types of ExpressCards. ExpressCards support both
the PCI Express and USB 2.0 standard.
Express Service Code вЂ” A numeric code located on a sticker on your Dellв„ў
computer. Use the Express Service Code when contacting Dell for assistance. Express
Service Code service may not be available in some countries.
extended display mode вЂ” A display setting that allows you to use a second monitor as
an extension of your display. Also referred to as dual display mode.
extended PC Card вЂ” A PC Card that extends beyond the edge of the PC Card slot
when installed.
Glossary
229
F
Fahrenheit вЂ” A temperature measurement scale where 32В° is the freezing point and
212В° is the boiling point of water.
FBD вЂ” fully-buffered DIMM вЂ” A DIMM with DDR2 DRAM chips and an
Advanced Memory Buffer (AMB) that speeds communication between the DDR2
SDRAM chips and the system.
FCC вЂ” Federal Communications Commission вЂ” A U.S. agency responsible for
enforcing communications-related regulations that state how much radiation
computers and other electronic equipment can emit.
fingerprint reader вЂ” A strip sensor that uses your unique fingerprint to authenticate
your user identity to help secure your computer.
folder вЂ” A term used to describe space on a disk or drive where files are organized and
grouped. Files in a folder can be viewed and ordered in various ways, such as
alphabetically, by date, and by size.
format вЂ” The process that prepares a drive or disk for file storage. When a drive or
disk is formatted, the existing information on it is lost.
FSB вЂ” front side bus вЂ” The data path and physical interface between the processor
and RAM.
FTP вЂ” file transfer protocol вЂ” A standard Internet protocol used to exchange files
between computers connected to the Internet.
G
G вЂ” gravity вЂ” A measurement of weight and force.
GB вЂ” gigabyte вЂ” A measurement of data storage that equals 1024 MB
(1,073,741,824 bytes). When used to refer to hard drive storage, the term is often
rounded to 1,000,000,000 bytes.
GHz вЂ” gigahertz вЂ” A measurement of frequency that equals one thousand million
Hz, or one thousand MHz. The speeds for computer processors, buses, and interfaces
are often measured in GHz.
graphics mode вЂ” A video mode that can be defined as x horizontal pixels by y vertical
pixels by z colors. Graphics modes can display an unlimited variety of shapes and
fonts.
GUI вЂ” graphical user interface вЂ” Software that interacts with the user by means of
menus, windows, and icons. Most programs that operate on the Windows operating
systems are GUIs.
230
Glossary
H
hard drive вЂ” A drive that reads and writes data on a hard disk. The terms hard drive
and hard disk are often used interchangeably.
heat sink вЂ” A metal plate on some processors that helps dissipate heat.
hibernate mode вЂ” A power management mode that saves everything in memory to a
reserved space on the hard drive and then turns off the computer. When you restart
the computer, the memory information that was saved to the hard drive is
automatically restored.
HTTP вЂ” hypertext transfer protocol вЂ” A protocol for exchanging files between
computers connected to the Internet.
Hyper-Threading вЂ” Hyper-Threading is an Intel technology that can enhance overall
computer performance by allowing one physical processor to function as two logical
processors, capable of performing certain tasks simultaneously.
Hz вЂ” hertz вЂ” A unit of frequency measurement that equals 1 cycle per second.
Computers and electronic devices are often measured in kilohertz (kHz), megahertz
(MHz), gigahertz (GHz), or terahertz (THz).
I
IC вЂ” integrated circuit вЂ” A semiconductor wafer, or chip, on which thousands or
millions of tiny electronic components are fabricated for use in computer, audio, and
video equipment.
IDE вЂ” integrated device electronics вЂ” An interface for mass storage devices in which
the controller is integrated into the hard drive or CD drive.
IEEE 1394 вЂ” Institute of Electrical and Electronics Engineers, Inc. вЂ” A highperformance serial bus used to connect IEEE 1394-compatible devices, such as digital
cameras and DVD players, to the computer.
infrared sensor вЂ” A port that allows you to transfer data between the computer and
infrared-compatible devices without using a cable connection.
integrated вЂ” Usually refers to components that are physically located on the
computerвЂ™s system board. Also referred to as built-in.
I/O вЂ” input/output вЂ” An operation or device that enters and extracts data from your
computer. Keyboards and printers are I/O devices.
I/O address вЂ” An address in RAM that is associated with a specific device (such as a
serial connector, parallel connector, or expansion slot) and allows the processor to
communicate with that device.
Glossary
231
IrDA вЂ” Infrared Data Association вЂ” The organization that creates international
standards for infrared communications.
IRQ вЂ” interrupt request вЂ” An electronic pathway assigned to a specific device so
that the device can communicate with the processor. Each device connection must be
assigned an IRQ. Although two devices can share the same IRQ assignment, you
cannot operate both devices simultaneously.
ISP вЂ” Internet service provider вЂ” A company that allows you to access its host server
to connect directly to the Internet, send and receive e-mail, and access websites. The
ISP typically provides you with a software package, user name, and access phone
numbers for a fee.
K
Kb вЂ” kilobit вЂ” A unit of data that equals 1024 bits. A measurement of the capacity of
memory integrated circuits.
KB вЂ” kilobyte вЂ” A unit of data that equals 1024 bytes but is often referred to as
1000 bytes.
key combination вЂ” A command requiring you to press multiple keys at the same
time.
kHz вЂ” kilohertz вЂ” A measurement of frequency that equals 1000 Hz.
L
LAN вЂ” local area network вЂ” A computer network covering a small area. A LAN
usually is confined to a building or a few nearby buildings. A LAN can be connected to
another LAN over any distance through telephone lines and radio waves to form a
wide area network (WAN).
LCD вЂ” liquid crystal display вЂ” The technology used by portable computer and flatpanel displays.
LED вЂ” light-emitting diode вЂ” An electronic component that emits light to indicate
the status of the computer.
local bus вЂ” A data bus that provides a fast throughput for devices to the processor.
LPT вЂ” line print terminal вЂ” The designation for a parallel connection to a printer or
other parallel device.
232
Glossary
M
Mb вЂ” megabit вЂ” A measurement of memory chip capacity that equals 1024 Kb.
Mbps вЂ” megabits per second вЂ” One million bits per second. This measurement is
typically used for transmission speeds for networks and modems.
MB вЂ” megabyte вЂ” A measurement of data storage that equals 1,048,576 bytes. 1 MB
equals 1024 KB. When used to refer to hard drive storage, the term is often rounded to
1,000,000 bytes.
MB/sec вЂ” megabytes per second вЂ” One million bytes per second. This measurement
is typically used for data transfer ratings.
media bay вЂ” A bay that supports devices such as optical drives, a second battery, or a
Dell TravelLiteв„ў module.
memory вЂ” A temporary data storage area inside your computer. Because the data in
memory is not permanent, it is recommended that you frequently save your files while
you are working on them, and always save your files before you shut down the
computer. Your computer can contain several different forms of memory, such as
RAM, ROM, and video memory. Frequently, the word memory is used as a synonym
for RAM.
memory address вЂ” A specific location where data is temporarily stored in RAM.
memory mapping вЂ” The process by which the computer assigns memory addresses to
physical locations at start-up. Devices and software can then identify information that
the processor can access.
memory module вЂ” A small circuit board containing memory chips, which connects to
the system board.
MHz вЂ” megahertz вЂ” A measure of frequency that equals 1 million cycles per second.
The speeds for computer processors, buses, and interfaces are often measured in MHz.
Mini PCI вЂ” A standard for integrated peripheral devices with an emphasis on
communications such as modems and NICs. A Mini PCI card is a small external card
that is functionally equivalent to a standard PCI expansion card.
Mini-Card вЂ” A small card designed for integrated peripherals, such as
communication NICs. The Mini-Card is functionally equivalent to a standard PCI
expansion card.
Mobile Broadband network вЂ” (also known as a WWAN) is a series of interconnected
computers that communicate with each other through wireless cellular technology
and provides Internet access in the same varied locations from which cellular
telephone service is available. Your computer can maintain the Mobile Broadband
network connection regardless of its physical location, as long as the computer remains
in the service area of your cellular service provider.
Glossary
233
modem вЂ” A device that allows your computer to communicate with other computers
over analog telephone lines. Three types of modems include: external, PC Card, and
internal. You typically use your modem to connect to the Internet and exchange
e-mail.
module bay вЂ” See media bay.
MP вЂ” megapixel вЂ” A measure of image resolution used for digital cameras.
ms вЂ” millisecond вЂ” A measure of time that equals one thousandth of a second.
Access times of storage devices are often measured in ms.
N
network adapter вЂ” A chip that provides network capabilities. A computer may
include a network adapter on its system board, or it may contain a PC Card with an
adapter on it. A network adapter is also referred to as a NIC (network interface
controller).
NIC вЂ” See network adapter.
notification area вЂ” The section of the Windows taskbar that contains icons for
providing quick access to programs and computer functions, such as the clock, volume
control, and print status. Also referred to as system tray.
ns вЂ” nanosecond вЂ” A measure of time that equals one billionth of a second.
NVRAM вЂ” nonvolatile random access memory вЂ” A type of memory that stores data
when the computer is turned off or loses its external power source. NVRAM is used for
maintaining computer configuration information such as date, time, and other system
setup options that you can set.
O
optical drive вЂ” A drive that uses optical technology to read or write data from CDs,
DVDs, or DVD+RWs. Example of optical drives include CD drives, DVD drives,
CD-RW drives, and CD-RW/DVD combo drives.
P
parallel connector вЂ” An I/O port often used to connect a parallel printer to your
computer. Also referred to as an LPT port.
partition вЂ” A physical storage area on a hard drive that is assigned to one or more
logical storage areas known as logical drives. Each partition can contain multiple
logical drives.
234
Glossary
PC Card вЂ” A removable I/O card adhering to the PCMCIA standard. Modems and
network adapters are common types of PC Cards.
PCI вЂ” peripheral component interconnect вЂ” PCI is a local bus that supports 32-and
64-bit data paths, providing a high-speed data path between the processor and devices
such as video, drives, and networks.
PCI Express вЂ” A modification to the PCI interface that boosts the data transfer rate
between the processor and the devices attached to it. PCI Express can transfer data at
speeds from 250 MB/sec to 4 GB/sec. If the PCI Express chip set and the device are
capable of different speeds, they will operate at the slower speed.
PCMCIA вЂ” Personal Computer Memory Card International Association вЂ” The
organization that establishes standards for PC Cards.
PIO вЂ” programmed input/output вЂ” A method of transferring data between two
devices through the processor as part of the data path.
pixel вЂ” A single point on a display screen. Pixels are arranged in rows and columns to
create an image. A video resolution, such as 800 x 600, is expressed as the number of
pixels across by the number of pixels up and down.
Plug-and-Play вЂ” The ability of the computer to automatically configure devices. Plug
and Play provides automatic installation, configuration, and compatibility with
existing hardware if the BIOS, operating system, and all devices are Plug and Play
compliant.
POST вЂ” power-on self-test вЂ” Diagnostics programs, loaded automatically by the
BIOS, that perform basic tests on the major computer components, such as memory,
hard drives, and video. If no problems are detected during POST, the computer
continues the start-up.
processor вЂ” A computer chip that interprets and executes program instructions.
Sometimes the processor is referred to as the CPU (central processing unit).
PS/2 вЂ” personal system/2 вЂ” A type of connector for attaching a PS/2-compatible
keyboard, mouse, or keypad.
PXE вЂ” pre-boot execution environment вЂ” A WfM (Wired for Management)
standard that allows networked computers that do not have an operating system to be
configured and started remotely.
R
RAID вЂ” redundant array of independent disks вЂ” A method of providing data
redundancy. Some common implementations of RAID include RAID 0, RAID 1,
RAID 5, RAID 10, and RAID 50.
Glossary
235
RAM вЂ” random-access memory вЂ” The primary temporary storage area for program
instructions and data. Any information stored in RAM is lost when you shut down your
computer.
readme file вЂ” A text file included with a software package or hardware product.
Typically, readme files provide installation information and describe new product
enhancements or corrections that have not yet been documented.
read-only вЂ” Data and/or files you can view but cannot edit or delete. A file can have
read-only status if:
вЂў It resides on a physically write-protected floppy disk, CD, or DVD.
вЂў It is located on a network in a directory and the system administrator has assigned
rights only to specific individuals.
refresh rate вЂ” The frequency, measured in Hz, at which your screen's horizontal lines
are recharged (sometimes also referred to as its vertical frequency). The higher the
refresh rate, the less video flicker can be seen by the human eye.
resolution вЂ” The sharpness and clarity of an image produced by a printer or displayed
on a monitor. The higher the resolution, the sharper the image.
RFI вЂ” radio frequency interference вЂ” Interference that is generated at typical radio
frequencies, in the range of 10 kHz to 100,000 MHz. Radio frequencies are at the
lower end of the electromagnetic frequency spectrum and are more likely to have
interference than the higher frequency radiations, such as infrared and light.
ROM вЂ” read-only memory вЂ” Memory that stores data and programs that cannot be
deleted or written to by the computer. ROM, unlike RAM, retains its contents after
you shut down your computer. Some programs essential to the operation of your
computer reside in ROM.
RPM вЂ” revolutions per minute вЂ” The number of rotations that occur per minute.
Hard drive speed is often measured in rpm.
RTC вЂ” real time clock вЂ” Battery-powered clock on the system board that keeps the
date and time after you shut down the computer.
RTCRST вЂ” real-time clock reset вЂ” A jumper on the system board of some computers
that can often be used for troubleshooting problems.
S
SAS вЂ” serial attached SCSI вЂ” A faster, serial version of the SCSI interface (as
opposed to the original SCSI parallel architecture).
SATA вЂ” serial ATA вЂ” A faster, serial version of the ATA (IDE) interface.
236
Glossary
ScanDisk вЂ” A Microsoft utility that checks files, folders, and the hard diskвЂ™s surface
for errors. ScanDisk often runs when you restart the computer after it has stopped
responding.
SCSI вЂ” small computer system interface вЂ” A high-speed interface used to connect
devices to a computer, such as hard drives, CD drives, printers, and scanners. The
SCSI can connect many devices using a single controller. Each device is accessed by an
individual identification number on the SCSI controller bus.
SDRAM вЂ” synchronous dynamic random-access memory вЂ” A type of DRAM that is
synchronized with the optimal clock speed of the processor.
serial connector вЂ” An I/O port often used to connect devices such as a handheld
digital device or digital camera to your computer.
Service Tag вЂ” A bar code label on your computer that identifies your computer when
you access Dell Support at support.dell.com or when you call Dell for customer service
or technical support.
setup program вЂ” A program that is used to install and configure hardware and
software. The setup.exe or install.exe program comes with most Windows software
packages. Setup program differs from system setup.
shortcut вЂ” An icon that provides quick access to frequently used programs, files,
folders, and drives. When you place a shortcut on your Windows desktop and doubleclick the icon, you can open its corresponding folder or file without having to find it
first. Shortcut icons do not change the location of files. If you delete a shortcut, the
original file is not affected. Also, you can rename a shortcut icon.
SIM вЂ” Subscriber Identity Module вЂ” A SIM card contains a microchip that encrypts
voice and data transmissions. SIM cards can be used in phones or portable computers.
smart card вЂ” A card that is embedded with a processor and a memory chip. Smart
cards can be used to authenticate a user on computers equipped for smart cards.
S/PDIF вЂ” Sony/Philips Digital Interface вЂ” An audio transfer file format that allows
the transfer of audio from one file to another without converting it to and from an
analog format, which could degrade the quality of the file.
standby mode вЂ” A power management mode that shuts down all unnecessary
computer operations to save energy.
Strike Zoneв„ў вЂ” Reinforced area of the platform base that protects the hard drive by
acting as a dampening device when a computer experiences resonating shock or is
dropped (whether the computer is on or off).
surge protectors вЂ” Prevent voltage spikes, such as those that may occur during an
electrical storm, from entering the computer through the electrical outlet. Surge
protectors do not protect against lightning strikes or against brownouts, which occur
when the voltage drops more than 20 percent below the normal AC-line voltage level.
Glossary
237
Network connections cannot be protected by surge protectors. Always disconnect the
network cable from the network connector during electrical storms.
SVGA вЂ” super-video graphics array вЂ” A video standard for video cards and
controllers. Typical SVGA resolutions are 800 x 600 and 1024 x 768.
The number of colors and resolution that a program displays depends on the
capabilities of the monitor, the video controller and its drivers, and the amount of
video memory installed in the computer.
S-video TV-out вЂ” A connector used to attach a TV or digital audio device to the
computer.
SXGA вЂ” super-extended graphics array вЂ” A video standard for video cards and
controllers that supports resolutions up to 1280 x 1024.
SXGA+ вЂ” super-extended graphics array plus вЂ” A video standard for video cards and
controllers that supports resolutions up to 1400 x 1050.
system board вЂ” The main circuit board in your computer. Also known as the
motherboard.
system setup вЂ” A utility that serves as an interface between the computer hardware
and the operating system. System setup allows you to configure user-selectable options
in the BIOS, such as date and time or system password. Unless you understand what
effect the settings have on the computer, do not change the settings for this program.
T
TAPI вЂ” telephony application programming interface вЂ” Enables Windows programs
to operate with a wide variety of telephony devices, including voice, data, fax, and
video.
text editor вЂ” A program used to create and edit files that contain only text; for
example, Windows Notepad uses a text editor. Text editors do not usually provide
word wrap or formatting functionality (the option to underline, change fonts, and
so on).
TPM вЂ” trusted platform module вЂ” A hardware-based security feature that when
combined with security software enhances network and computer security by enabling
features such as file and e-mail protection.
travel module вЂ” A plastic device designed to fit inside the module bay of a portable
computer to reduce the weight of the computer.
238
Glossary
U
UAC вЂ” user account controlвЂ” Microsoft WindowsВ® Vistaв„ў security feature that,
when enabled, provides an added layer of security between user accounts and access to
operating system settings.
UMA вЂ” unified memory allocation вЂ” System memory dynamically allocated to
video.
UPS вЂ” uninterruptible power supply вЂ” A backup power source used when the
electrical power fails or drops to an unacceptable voltage level. A UPS keeps a
computer running for a limited amount of time when there is no electrical power. UPS
systems typically provide surge suppression and may also provide voltage regulation.
Small UPS systems provide battery power for a few minutes to enable you to shut
down your computer.
USB вЂ” universal serial bus вЂ” A hardware interface for a low-speed device such as a
USB-compatible keyboard, mouse, joystick, scanner, set of speakers, printer,
broadband devices (DSL and cable modems), imaging devices, or storage devices.
Devices are plugged directly in to a 4-pin socket on your computer or in to a multi-port
hub that plugs in to your computer. USB devices can be connected and disconnected
while the computer is turned on, and they can also be daisy-chained together.
UTP вЂ” unshielded twisted pair вЂ” Describes a type of cable used in most telephone
networks and some computer networks. Pairs of unshielded wires are twisted to protect
against electromagnetic interference, rather than relying on a metal sheath around
each pair of wires to protect against interference.
UXGA вЂ” ultra extended graphics array вЂ” A video standard for video cards and
controllers that supports resolutions up to 1600 x 1200.
V
video controller вЂ” The circuitry on a video card or on the system board (in computers
with an integrated video controller) that provides the video capabilitiesвЂ”in
combination with the monitorвЂ”for your computer.
video memory вЂ” Memory that consists of memory chips dedicated to video functions.
Video memory is usually faster than system memory. The amount of video memory
installed primarily influences the number of colors that a program can display.
video mode вЂ” A mode that describes how text and graphics are displayed on a
monitor. Graphics-based software, such as Windows operating systems, displays in
video modes that can be defined as x horizontal pixels by y vertical pixels by z colors.
Character-based software, such as text editors, displays in video modes that can be
defined as x columns by y rows of characters.
Glossary
239
video resolution вЂ” See resolution.
virus вЂ” A program that is designed to inconvenience you or to destroy data stored on
your computer. A virus program moves from one computer to another through an
infected disk, software downloaded from the Internet, or e-mail attachments. When
an infected program starts, its embedded virus also starts.
A common type of virus is a boot virus, which is stored in the boot sectors of a floppy
disk. If the floppy disk is left in the drive when the computer is shut down and then
turned on, the computer is infected when it reads the boot sectors of the floppy disk
expecting to find the operating system. If the computer is infected, the boot virus may
replicate itself onto all the floppy disks that are read or written in that computer until
the virus is eradicated.
V вЂ” volt вЂ” The measurement of electric potential or electromotive force. One V
appears across a resistance of 1 ohm when a current of 1 ampere flows through that
resistance.
W
W вЂ” watt вЂ” The measurement of electrical power. One W is 1 ampere of current
flowing at 1 volt.
WHr вЂ” watt-hour вЂ” A unit of measure commonly used to indicate the approximate
capacity of a battery. For example, a 66-WHr battery can supply 66 W of power for
1 hour or 33 W for 2 hours.
wallpaper вЂ” The background pattern or picture on the Windows desktop. Change
your wallpaper through the Windows Control Panel. You can also scan in your favorite
picture and make it wallpaper.
WLAN вЂ” wireless local area network. A series of interconnected computers that
communicate with each other over the air waves using access points or wireless routers
to provide Internet access.
write-protected вЂ” Files or media that cannot be changed. Use write-protection when
you want to protect data from being changed or destroyed. To write-protect a 3.5-inch
floppy disk, slide its write-protect tab to the open position.
WPAN вЂ” wireless personal area network. A computer network used for communication
among computer devices (including telephones and personal digital assistants) close to
one person.
WWAN вЂ” wireless wide area network. A wireless high-speed data network using
cellular technology and covering a much larger geographic area than WLAN.
WXGA вЂ” wide-aspect extended graphics array вЂ” A video standard for video cards
and controllers that supports resolutions up to 1280 x 800."
240
Glossary
X
XGA вЂ” extended graphics array вЂ” A video standard for video cards and controllers
that supports resolutions up to 1024 x 768.
Z
ZIF вЂ” zero insertion force вЂ” A type of socket or connector that allows a computer
chip to be installed or removed with no stress applied to either the chip or its socket.
Zip вЂ” A popular data compression format. Files that have been compressed with the
Zip format are called Zip files and usually have a filename extension of .zip. A special
kind of zipped file is a self-extracting file, which has a filename extension of .exe. You
can unzip a self-extracting file by double-clicking it.
Zip drive вЂ” A high-capacity floppy drive developed by Iomega Corporation that uses
3.5-inch removable disks called Zip disks. Zip disks are slightly larger than regular
floppy disks, about twice as thick, and hold up to 100 MB of data.
Glossary
241
242
Glossary
Index
Numbers
8-in-1 memory card reader, 95
Bluetooth wireless technology
card
device status light, 25
installing, 189
A
Blu-ray Disc, 70-71, 73
audio device
connecting, 75
enabling, 90
brightness
adjusting, 47
boot sequence, 216
audio. See sound
C
B
camera, 23
battery
charge gauge, 61
charging, 65
checking the charge, 60
performance, 59
power meter, 61
removing, 65
replacing coin-cell battery, 190
storing, 66
carnet, 196
BD. See Blu-ray Disc
blank cards
ExpressCards, 91
removing, 93
blanks
ExpressCards, 95
removing, 96
CD
about, 70
CD-RW drive problems, 122
drive problems, 121
Check Disk, 122
cleaning
display, 218
keyboard, 218
media, 220
mouse, 219
touch pad, 219
coin-cell battery
replacing, 190
Index
243
computer
cleaning, 218
crashes, 133-134
restore to previous operating
state, 156
slow performance, 124, 135
specifications, 205
stops responding, 133
Dell MediaDirect
about, 26
problems, 134
connecting
audio device, 75
Mobile Broadband network, 104
TV, 75
DellConnect, 120, 198
contacting Dell, 203
copying CDs
general information, 70
helpful tips, 72
how to, 70
copying DVDs
general information, 70
helpful tips, 72
how to, 70
D
Dell
contacting, 203
Dell Diagnostics
about, 113
starting from the Drivers and
Utilities media, 115
starting from your hard drive, 113
244
Index
Dell Network Assistant, 120
Dell Support 3, 118
Dell Support Center, 118
Dell support site, 17
device latch release
description, 35
device status lights
description, 24
diagnostics
Dell, 113
digital array microphones, 26
display
adjusting brightness, 47
adjusting the size of icons, 193
adjusting the size of toolbars, 193
cleaning, 218
description, 23
dual display operation, 49
resolution, 50
switching the video image, 47
documentation
End User License Agreement, 15
ergonomics, 15
online, 17
Product Information Guide, 15
regulatory, 15
safety, 15
documentation (continued)
UserвЂ™s Guide, 16
warranty, 15
Dolby headphones, setting
up, 90
drivers
about, 145
identifying, 145
reinstalling, 146
Drivers and Utilities media, 15
about, 147
Dell Diagnostics, 113
drives
problems, 121
See also hard drive
See also optical drive
DVD
about, 70
drive problems, 121
F
fan
description, 35
FCM. See Flash Cache Module
Flash Cache Module, 187
H
hard drive
description, 35
problems, 122
replacing, 164
returning to Dell, 167
hardware
Dell Diagnostics, 113
Hardware Troubleshooter, 149
hibernate mode, 63
hinge cover
removing, 168
E
End User License Agreement, 15
I
ergonomics information, 15
icons
adjusting the size, 193
error messages, 125
ExpressCard slot
description, 29
ExpressCards, 91
blanks, 91, 93, 95
installing, 92
removing, 93
IEEE 1394 connector
description, 30
problems, 131
infrared sensor
description, 35
installing, 179
Index
245
Internet connection
about, 37
options, 37
setting up, 38
K
keyboard
cleaning, 218
numeric keypad, 53
problems, 131
removing, 169
shortcuts, 54
keyboard status lights
description, 26
keypad
numeric, 53
L
labels
Microsoft Windows, 16
Service Tag, 16
lost computer, 110
memory card, 95
blanks, 96
installing, 95
reader, 30
removing, 96
types, 95
memory card reader, 95
memory module cover
description, 35
messages
error, 125
Mini-Card
installing, 179
WLAN, 179
WPAN, 179
WWAN, 179
Mobile Broadband
network connections, 104
See also wireless switch
Mobile Broadband (WWAN)
problems, 136
M
media
playing, 67
media control buttons
Dell MediaDirect button, 74
description, 25
246
memory
DIMM A, 173
DIMM B, 175
installing, 172
removing, 172, 175
Index
modem connector
description, 32
monitor. See display
N
network
installing WLAN Mini-Card, 179
Mobile Broadband
(WWAN), 136
problems, 136
QuickSet, 193
network connector
description, 31
O
operating system
reinstalling Windows Vista, 156
P
PC Restore, 157
phone numbers, 203
power
hibernate mode, 63
line conditioners, 45
problems, 137
protection devices, 45
standby mode, 63
surge protectors, 45
UPS, 45
power button
description, 23
power light
conditions, 137
power management
adjusting settings, 193
QuickSet, 193
printer
cable, 43
connecting, 43
problems, 139
setting up, 43
USB, 44
problems
blue screen, 134
CD drive, 121
CD-RW drive, 122
computer crashes, 133-134
computer does not start up, 133
computer stops responding, 133
Dell Diagnostics, 113
Dell MediaDirect, 134
drives, 121
DVD drive, 121
error messages, 125
hard drive, 122
IEEE 1394 connector, 131
keyboard, 131
lockups, 133
network, 136
power, 137
power light conditions, 137
printer, 139
program crashes repeatedly, 133
program stops responding, 133
programs and Windows
compatibility, 134
restore computer to previous
operating state, 156
Index
247
problems (continued)
scanner, 140
slow computer performance, 124,
135
software, 133-135
sound and speakers, 141
speakers, 141
spyware, 124, 135
Product Information Guide, 15
scanner
problems, 140
screen. See display
security cable slot
description, 27
Service Tag, 16
SIM. See Subscriber Identity
Module
software
problems, 134-135
Q
QuickSet, 193
software and hardware
incompatibilities, 149
QuickSet Help, 18
sound
problems, 141
volume, 141
R
speakers
description, 34-35
problems, 141
volume, 141
RAM. See memory
regulatory information, 15
reinstalling
Windows Vista, 156
resolution
setting, 50
specifications, 205
spyware, 124, 135
standby mode
about, 63
stolen computer, 110
S
Subscriber Identity Module, 178
S/PDIF digital audio
enabling, 90
support
contacting Dell, 203
Safely Remove Hardware
icon, 130
support website, 17
safety instructions, 15
248
Index
S-video TV-out connector
description, 32
System Restore, 156
system setup program
commonly used options, 216
screens, 216
viewing, 216
troubleshooting
Dell Diagnostics, 113
Hardware Troubleshooter, 149
restore computer to previous
operating state, 156
TV
connecting, 75
T
taskbar
Dell Mobile Broadband Card
Utility, 137
QuickSet icon, 193
Safely Remove Hardware, 130
wireless activity indicator, 103
U
uninterruptible power supply.
See UPS
UPS, 45
telephone numbers, 203
USB connector
description, 32
toolbars
adjusting the size, 193
UserвЂ™s Guide, 16
touch pad, 55
cleaning, 219
customizing, 56
V
touch pad buttons
description, 25
video
problems, 143
track stick/touch pad buttons
description, 25
video controller configuration
determining what controller is
installed, 21
transferring information to a new
computer, 39
volume
adjusting, 141
traveling with the computer
by air, 196
identification tag, 195
packing, 195
tips, 196
W
warranty information, 15
Windows Easy Transfer
wizard, 39
Index
249
Windows Vista
Device Driver Rollback, 146
Program Compatibility
wizard, 134
reinstalling, 156
System Restore, 156
Windows Easy Transfer wizard, 39
Windows XP
Device Driver Rollback, 147
hibernate mode, 63
PC Restore, 157
standby mode, 63
wireless
turning activity on and off, 193
250
Index
wizards
Program Compatibility
wizard, 134
Windows Easy Transfer, 39
WLAN, 179
installing Mini-Card, 179
WPAN
installing, 186
WWAN
installing, 182
See also Mobile Broadband

Report of the visit

Related documents

Products

Support

Report of the visit

Related documents

Add this document to collection(s)

Add this document to saved

Suggest us how to improve flashcards