polypropylene-homopolymer

In the Name of God
Index
2
About Shazand (Arak) Petrochemical Company
4
AA /VAM
6
Oxo Alcohol 2-Ethyl Hexanol/Normal Butanol /Iso Butanol
8
EA
Ethanol Amines
10
EO/EG
Ethylene Oxide /Eyhylene Glycol
12
ETX(S)
Ethoxylated Products
16
1,3 Butadiene /Butane – Butene Raffinate
18
C4-cut/But-1 C4-cut /Butene-1
20
Olefins
CFO/HPG/C6 CUT
22
PBR
Poly Butadiene Rubber
26
PE
Polyethylene
32
PP
Polypropylene
Acetic Acid /Vinyl Acetate Monomer
4
Shazand (Arak)
Petrochemical
Company
1
Shazand (Arak)
Petrochemical
Company
About Shazand (Arak) Petrochemical Company
Shazand (Arak) Petrochemical Company has established as a Grass
Root Complex for the production of different petrochemical products
such as Plastics, Synthetic Rubber and other chemicals from Naphtha as
feedstock.
The total sellable annual production capacity of the Complex presently is
750,000 tons achieved in eighteen production plants to serve domestic
market as well as being exported to the global market. The production
of the Complex by adopting the advanced and modern technologies are
tailored to meet the internationally acceptable application grades and
purities both for polymers and chemical products, which are furnished
in this brochure. Shazand Petrochemical Company is holding the ISO
9001-Version2008, ISO14001-2004 and OHSAS 18001-2007 certificates.
Complex units:
The production plants of the complex and their capacities after expansion
are as follows:
Plants
Ethylene
Capacity
306400
Linear Low Density Polyethylene (LLDPE)
75000
High Density Polyethylene (HDPE)
85000
Polypropylene (PP)
75000
Poly Butadiene Rubber (PBR)
30000
Butene-1 (BUT-1)
7000
Acetic Acid (AA)
30000
Vinyl Acetate Monomer (VAM)
30000
Butane- Butene Raffinate (BBR)
25500
Hydrogenated Pyrolysis Gasoline (HPG)
169000
Ethylene Oxide (EO)
110000
Ethylene Glycol (EG)
105000
2-Ethyl Hexanol (2EH)
45000
Iso-Butanol
5000
Normal Butanol
5700
Ethanol Amines (EA)
30000
Ethoxylated Products (ETX)
30000
2
Shazand (Arak)
Petrochemical
Company
BLOCK DIAGRAM OF PROCESS UNIT
85.000
HDPE
1.800
BUTENE-1
75.000
LLDPE
FUEL-ENERGY
(FOR START UP)
8.000
OXYGEN
BALANCE GAS
OXYGEN
30.000
AA
VAM
BUTADIENE
PBR
HEAVY NAPHTHA
25.000
ETHYLENE
900,000
KEROSENE Ton/year
C4 “S
OLEFINS
18.30
BBR
PROPYLENE
LIGHT NAPHTHA
75.000
PP
169.000
FUEL OIL
RAW GASOLINE
45.000
H2
2 EH
BUTYR
ALDEHYDE
2800
10.700
BUTANOLS
PGH
Co2
NATURAL GAS
105.000
5,000
12.2 MILLION NORMAL C. M.
EG
EO
OXYGEN
30.000
EA
5.000
AMMONIA
30.000
ETX
FIGURES: METRIC TONS PER YEAR
GLYCOL, FATTY ALCOHOL, NONYL PHENOL
3
Shazand (Arak)
Petrochemical
Company
ACETIC ACID/VINYL ACETATE MONOMER
Vinyl Acetate Monomer (VAM)
Properties
Purity
Spec,Value
Unit
Test Method
99.9 MIN
WT%
UHDE - GCL2
Methyl acetate
100 MAX
PPM
UHDE - GCL2
Ethyl acetate
200 MAX
PPM
UHDE - GCL2
Acetaldehyde
100 MAX
PPM
UHDE - GCL2
Acidity as acetic acid
60 MAX
PPM
UHDE - VA-1
Water content
200 MAX
PPM
ASTM D - 1364
0.932-0.933
gr/CM3
ASTM D - 4052
5 MAX
APHA
ASTM D - 1209
Cutomer
Request (5-10)
PPM
ASTM D - 1293
Density@ 20В°C
Color
Hydroquinon
Application : Poly vinyl acetate, Polyvinyl alcohol, Poly vinyl butyral, Polu vinyl
ethylene, Paints, adhesives, Texties
Acetic Acid (AA)
Properties
Spec,Value
Unit
Test Method
Purity
99.5 MIN
WT%
ASTM E - 302
Water content
0.4 MAX
WT%
ASTM E - 203
Formic acid
0.15 MAX
WT%
ASTM D - 3546
Acetaldehyde
300 MAX
PPM WT%
UHDE - GCL 3
1 MAX
PPM WT%
ASTM D - 394
1.0505 - 1.0525
----
ASTM D - 4052
10 MAX
APHA
ASTM D - 1209
Iron
SP.GR.@20/20В°C
Color
Application : Acetate cellulose, paint,solvent synthesis fiber, photography drug,
curriery leather
4
Shazand (Arak)
Petrochemical
Company
5
Shazand (Arak)
Petrochemical
Company
OXO ALCOHOLS
2-Ethyl Hexanol (2EH)
Properties
Purity
Water
Spec,Value
Unit
99.5 MIN
WT%
Test Method
ASTM D 5008
0.1 MAX
WT%
ASTM D 1364
Aciditiy as Acetic Acid
0.015 MAX
WT%
ASTM D 1613
Aldehydes as (EHA)
0.05 MAX
WT%
ASTM E 411
Sulphoirc Acid Color
50 MAX
APHA
ASTM E 852
EMPOH*
0.4 MAX
WT%
ASTM D 5008
Color
10 MAX
APHA
ASTM D 1209
Odour
MILD
----
Unknown
----
WT%
---ASTM D 5008
* 2-Ethyl, 4-Methyl, Pentanol
Application : Plasticizer for PVC & resines, defoaming agent, wetting agent,organic synthesis
plasticizer, inks, rubber, paper, lubricant photography, paint
6
Shazand (Arak)
Petrochemical
Company
Normal Butanol (NB)
Spec,Value
Unit
Purity
99.5 MIN
WT%
ASTM D 5008
Color
10 MAX
APHA
ASTM D 1209
Water
0.1 MAX
WT%
ASTM D 1364
Aldehydes
0.05 MAX
WT%
ASTM E 411
Acidity as Acetic Acid
0.01 MAX
WT%
ASTM D 1613
25 MAX
APHA
ASTM E 852
- - --
WT%
ASTM D 5008
Properties
Sulphoric Acid color
Unknown
Test Method
Application : Organic synthesis solvent, laquers
Iso Butanol (IB)
Spec,Value
Unit
Purity
99.5 MIN
WT%
ASTM D 5008
Color
10 MAX
APHA
ASTM D 1209
Water
0.2 MAX
WT%
ASTM D 1364
Aldehydes
0.1 MAX
WT%
ASTM E 411
Acidity as Acetic Acid
0.01 MAX
WT%
ASTM D 1613
---
WT%
ASTM D 5008
Properties
Unknown
Test Method
Application: Organic synthesis, latent solvent in paint & laquers,amino coating resins
7
Shazand (Arak)
Petrochemical
Company
ETHANOL AMINE
Mono Ethanol Amine (MEA)
Properties
Spec,Value
Unit
99.0 MIN
WT%
1.017-1.019
-
ASTM D 891
Water
0.2 MAX
WT%
ASTM D 1364
Equivalent MW
61-62.5
-
Color
10 MAX
Pt-Co
Purity
SP.GR.@20/20В°C
* Packed in HDPE drum
8
Shazand (Arak)
Petrochemical
Company
Test Method
MA 503
MA 238
ASTM D 1209
Di Ethanol Amine (DEA)
Properties
Spec,Value
Unit
Test Method
Purity
98.5 MIN
WT%
MA- 503
Color
15 MAX
Pt-Co
ASTM D 1209
Water
0.15 MAX
WT%
ASTM D 1364
MEA
0.6 MAX
WT%
MA-503
TEA
0.8 MAX
WT%
MA-503
SP.GR (20/20)В°C
1.09 - 1094
-
Equivalent M.W
104 - 106
WT%
ASTM D 891
MA-238
Application: Polyurethanes,anti corrosion ferrous, cement industries,textile industries, acid gas removal
Tri Ethanol Amine 85% (TEA 85%)
Properties
Spec,Value
Unit
Test Method
85.0 MIN
WT%
MA - 503
1.122 - 1.130
-
ASTM D - 891
Water
0.20 MAX
WT%
ASTM D -1364
MEA
0.50 MAX
WT%
MA - 503
DEA
15 MAX
WT%
MA - 503
Color
50 MAX
Pt-Co
ASTM D – 1209
Purity
SP.GR.@ 20/20В°C
Tri Ethanol Amine 99% (TEA 99%)
Properties
Spec,Value
Unit
Test Method
99.0 MIN
WT%
MA - 503
1.122 - 1.127
-
ASTM D 891
Water
0.2 MAX
WT%
ASTM D 1364
Color
75 MAX
Pt-Co
ASTM D 1209
Purity
SP.GR.@ 20/20В°C
Application : Material, Polyurethanes, Anti corrosion ferrous, Cement industries, Textile industries,
Acid gas removal
9
Shazand (Arak)
Petrochemical
Company
ETHYLENE OXIDE/ETHYLENE GLYCOL
Ethylene Oxide (EO)*
Properties
Spec,Value
Unit
Test Method
Purity
99.9 MIN
WT%
MA - 773
Color
5 MAX
Pt-Co
DC - 139
Water Content
100 MAX
PPM
VC - 261A
Aldehydes as Acetaldehyde
30 MAX
PPM WT%
DC -163/A
Acidity
20 MAX
PPM WT%
DC - 138
0.003 MAX
gr/100ML
DC - 133
Acetylene
---
PPM
S - 414 - C
Suspended Matter
---
WT%
DC - 139
Residue
*Not Exportable
Application : Glycols, Polyether, Polyols, Ethanol Amines, Ethoxilated Products.
Mono Ethylene Glycol (MEG)
Properties
Spec,Value
Unit
Test Method
Purity
99.8 MIN
WT%
ASTM E 202
Di ethylene Glycol
0.08 MAX
WT%
ASTM E 202
Water Content
0.08 MAX
WT%
ASTM E 203
10 MAX
PPM WT%
ASTM D 1613
0.005 MAX
gr/100ML
DC - 254A
Chlorides as Chlorine Ion
0.1 MAX
PPM WT%
EO - 635
Aldehydes as Acetaldehyde
10 MAX
PPM WT%
DC -163C
Iron
0.1 MAX
PPM WT%
ASTM E 202
5 MAX
Pt-Co
ASTM D 1209
---
ASTM D 891
Acidity as Acetic Acid
ASH
Color
SP.GR.@20/20В°c
1.1151-1,1156
(5-95 vol%)
1 MAX
IBP
196 MIN
Distillation@760mm Hg
UV Transmittance
o
o
o
C
ASTM D 1078
C
ASTM D 1078
C
ASTM D 1078
DP
199 MAX
@ 220 nm
70 MIN
T%
@ 275 nm
95 MIN
T%
@ 350 nm
99 MIN
T%
Application : PET, Polyester, Antifreeze, Solvent Dehydration Agent, Tile.
10
Shazand (Arak)
Petrochemical
Company
EO - 577A
Di Ethylene Glycol (DEG)
Properties
Spec,Value
Unit
Test Method
Purity
99.8 MIN
WT%
ASTM E 202
Mono Ethylene Glycol
0.05 MAX
WT%
ASTM E 202
Tri Ethylene Glycol
0.05 MAX
WT%
ASTM E 202
Water Content
0.05 MAX
WT%
ASTM E 203
Acidity
0.005 MAX
WT%
ASTM D 1613
ASH
0.005 MAX
WT%
DC - 254/A
1.1175-1.1195
-
ASTM D 891
10 MAX
Pt-Co
ASTM D 1209
SP.GR.@20/20В°c
Color
IBP
242 MIN
Distillation @ 760mm Hg
DP
250 MAX
o
o
C
ASTM D 1078
C
Application : Polyurethane Textile Softener, Petroleum solvent, Dehydration of Natural Gas,
Plasticizer,Solvent for Nitrocellulose.
Tri Ethylene Glycol (TEG)
Properties
Spec,Value
Unit
Test Method
Purity
97 MIN
WT%
ASTM E 202
DEG
2 MAX
WT%
ASTM E 202
TEG (T.TEG)
1 MAX
WT%
ASTM E 202
Water
0.05 MAX
WT%
ASTM E 203
Acidity
0.01 MAX
WT%
ASTM D 1613
ASH
0.005 MAX
WT%
DC - 254/A
SP.GR.@20/20В°c
1.124-1.126
-
ASTM D 891
25 MAX
Pt-Co
ASTM D 891
Color
Distillation @760mm Hg (5-95vol%)
280 MIN - 295 MAX
o
C
ASTM D 1078
Application : Polyurethane Textile Softener, Petroleum solvent, Dehydration of Natural Gas, Plasticizer,
Solvent for Nitrocellulose.
11
Shazand (Arak)
Petrochemical
Company
ETHOXYLATED PRODUCTS
Liquid Form of Poly Ethylene Glycol Grades
Properties
O
Appearance (25 c)
Color
PH (5% In Water)
Water content
Hydoxyl Number
O
Viscosity ( 40 c)
O
Density ( 40 c)
M.W.
Unit
Test Method
PEG-200
PEG-300
PEG-400
PEG-600
---
VISUAL
Clear Liq.
Clear Liq.
Clear Liq.
White Paste
APHA
ASTM D 1209
50 Max.
50 Max.
50 Max.
50 Max.
---
ASTM D 1172
5-7
5-7
5-7
5-7
%Wt
Ballestera BZ6
0.5 Max.
0.5 Max.
0.5 Max.
0.5 Max.
mgKOH/gr
ASTM D 4245
510-623
340-415
261-303
172-204
cSt
ASTM D 445
21-25
31-35
40-45
60-66
kg/L
ASTM D 1298
1.10-1.11
1.10-1.11
1.10-1.12
1.10-1.12
kg/kmol
Calculated
---
---
370-430
550-652
Solid Form of Poly Ethylene Glycol Grades
Properties
Color
PH (5% In Water)
Water content
Hydoxyl Number
O
Viscosity ( 40 c)
O
Density ( 40 c)
Freezing Point
M.W.
12
Shazand (Arak)
Petrochemical
Company
Unit
Test
Method
PEG1000
PEG1500
APHA
ASTM D 1209
50 Max.
(APHA)
Slightly
Haze
Slightly
Haze
---
ASTM D 1172
5-7
4.5-7.5
%Wt
Ballestera
BZ6
0.5 Max.
mgKOH/
ASTM D 4245 106-119
gr
cSt
ASTM D 445
kg/L
ASTM D 1298 1.10-1.12
O
36-40
PEG3350
PEG4000
PEG6000
PEG-7000
Slightly
Haze
Slightly
Haze
Slightly
Haze
Slightly
Haze
Slightly
Haze
4.5-7.5
5-7
4.5-7.5
4.5-7.5
4.5-7.5
5-7
1.0 Max.
1.0 Max.
0.5 Max.
1.0 Max.
1.0 Max.
1.0 Max.
0.5 Max.
70-80
53-59
25.5-29.5
30-38
25-32
16-22
17-22
26-33
38-49
260-360
76-110
110-158
250-390
600-900
---
---
1.07-1.09
---
---
---
1.07-1.09
53-57
53-59
55-61
---
PEG-2000 PEG-3000
C
---
---
42-48
---
---
kg/kmol
Calculated
---
---
1900-2100
---
3015-3685 3600-4400 5400-6600
---
Pharmaceutical Poly Ethylene Glycol Grades
Properties
Unit
Test Method
PEG200
PEG300
PEG400
PEG600
PEG1000
PEG1500
PEG2000
PEG3000
Color
APHA
ASTM D 1209
50 Max.
50 Max.
50 Max.
50 Max.
50 Max.
Slightly
Haze
Slightly
Haze
50 Max.
---
ASTM D 1172
4.5-7.5
4.5-7.5
4.5-7.5
4.5-7.5
4.5-7.5
4.5-7.5
4.5-7.5
4.5-7.5
0.5 Max.
PH( 5% In Water)
%Wt
Ballestera BZ6
0.5 Max.
0.5 Max.
0.5 Max.
0.5 Max.
0.5 Max.
1.0 Max
1.0 Max
mgKOH/gr
ASTM D 4245
234-590
356-394
267-295
178-196
118-107
70-80
53-59
Density (40Лљc)
Kg/L
ASTM D 1298
1.10-1.11
1.10-1.11
1.10-1.11
1.10-1.11
1.10-1.11
Viscosity
(98.9Лљc)
cSt
ASTM D 445
3.9-4.8
5.4-6.4
6.8-8
9.9-11.3
16-19
26-33
38-49
67-93
190-210
282-315
380-420
570-630
950-1050
1350-1650
1900-2100
2700-3300
15Max
15Max
0.1 Max
Water content
Hydoxyl Number
41.5-34
1.10-1.11
Kg/Kmol
Calculated
Formaldehyde
ppm
BP METHOD
Residue On
Ignition
wt%
USP
0.1 Max
0.1 Max
0.1 Max
0.1 Max
0.1 Max
0.1 Max
MEG & DEG
wt%
USP
<0.25
Max
<0.25
Max
<0.25
Max
<0.25
Max
<0.25 Max
<0.25 Max
1,4 Dioxane
ppm
USP
<10
<10
<10
<10
<10
10MAX
10MAX
<10
Ethylene Oxide
ppm
USP
<10
<10
<10
<10
<10
1Max.
1MAX
<10
Organic Volatile
ppm
USP 467
<10
<10
<10
<10
<10
<742
<742
<10
ml NaOH(0.1M)
BP METHOD
ЛљC
BP 2.2.18
ppm
USP 231
m.M.W.
Acidity
Freezing Point
Heavy Metal
42-48
<5
<5
<5
50 Max.
Slightly Haze
4.5-7.5
4.5-7.5
4.5-7.5
1Max.
0.5 Max.
1Max.
18-14.6
10-12.5
ASTM D 1172
4.5-7.5
4.5-7.5
Ballestera BZ6
1Max.
1Max.
30-38
25-32
16-22
ASTM D 1209
--%Wt
mgKOH/gr
ASTM D 4245
Kg/L
ASTM D 1298
<5
PEG10000
Slightly
Haze
APHA
5MAX
PEG-7000
Slightly
Haze
Color
Viscosity (98.9Лљc)
5MAX
Slightly Haze
PEG-3350
Density (40Лљc)
<5
PEG6000
Test Method
Hydoxyl Number
<5
PEG4000
Unit
Water content
<0.25 Max
0.1MAX
Properties
PH( 5% In Water)
0.1 Max
1.10-1.11
cSt
ASTM D 445
76-110
110-158
250-390
350-590
684-1384
Kg/Kmol
Calculated
3015-3685
3600-4400
5400-6600
6300-7700
9000-1100
Formaldehyde
ppm
BP METHOD
15Max
15Max
15Max
Residue On Ignition
wt%
USP
0.1 Max
0.1 Max
0.1 Max
MEG & DEG
wt%
USP
1,4 Dioxane
ppm
USP
<10
<10
<10
<10
<10
Ethylene Oxide
ppm
USP
<1
<1
<1
<10
<1
<742
<742
<742
<10
m.M.W.
Organic Volatile
Acidity
Freezing Point
Heavy Metal
15Max
0.1 Max
0.1 Max
<0.25 Max
ppm
USP 467
ml NaOH(0.1M)
BP METHOD
ЛљC
BP 2.2.18
53-57
53-59
55-61
ppm
USP 231
<5
<5
<5
0.1MAX
<742
0.1MAX
55-61
<5
<5
13
Shazand (Arak)
Petrochemical
Company
NonylPhenol Ethoxylate (NPE)
Properties
Unit
Test Method
Appearance (25В°C)
---
Visual
Clear Liq
Clear Liq
Clear Liq
Clear Liq
Clear Liq
Clear Liq
Cloud Point (1)
O
C
Ballestera HA1
25-30
54-56
63-65
68-69
19-21
54-56
PH (5% in Water)
---
ASTM D 1172
5-7
5-7
5-7
5-7
5-7
5-7
Hydroxyl Number
mgKOH/gr
ASTM D 4252
180 - 190
140 - 150
127 - 132
115 - 120
97 - 107
89 - 93
Viscosity (25В°C)
cSt
ASTM D 445
350 - 400
235 - 265
225 - 255
220 - 250
220 - 250
225 - 255
Density (25В°C)
kg/L
ASTM D 1298
0.99 - 1.00 1.10-1.03 1.03 - 1.04 1.03 - 1.04 1.03 - 1.06 1.05 - 1.06
---
Calculated
HLB
NPE-2EO NPE-4EO NPE-5EO NPE-6EO NPE-7EO NPE-9EO
5.6 - 6.0
8.8 - 9.4
9.9 - 10.3 10.8 - 11.3 10.6 - 11.5 12.6 - 13.1
O
(1) - 10% Solution in BDG at 25 C
Properties
Unit
Test Method
NPE-10EO
NPE-12EO
NPE-15EO
NPE-20EO
NPE-45EO
Appearance (25В°C)
---
Visual
Turb Liq.
Turb Liq.
Turb Liq.
Clear Liq.
Flakes
Cloud Point (1)
O
C
Ballestera HA1
64-66
84-86
67-69
73-76
---
PH (5% in Water)
---
ASTM D 1172
5-7
5-7
5-7
5-7
5-7
Hydroxyl Number
mgKOH/gr
ASTM D 4252
85 - 89
75 - 79
62 - 65
49 - 52
23 - 27
Viscosity (25В°C)
cSt
ASTM D 445
230 - 260
105 - 125
130 - 150
110 - 130
225 - 255
Density (25В°C)
kg/L
ASTM D 1298
1.05 - 1.07
1.05 - 1.06
1.06-1.07
1.06-1.08
95-115
---
Calculated
13.3 - 14.0
141 - 14.9
14.6-15.3
15.4-16.3
16.2-19.1
HLB
O
(1) - 10% Solution in BDG at 25 C
Coconut Fatty Acid Ethoxylate
Properties
Unit
Test method
CFA- 8EO
CFA- 9EO
CFA- 10 EO
Appearance
----
-----
Yellowish-clear
liquid
Yellowish-clear
liquid
Yellowish-clear
liquid
Cloud Point (1)
O
C
Ballestra HA1
67 - 60
63-70
67-73
PH ( 5 % in Water )
-----
ASTM D 1172
5-7
5-7
5-7
Water content
Wt%
Ballestra B – Z7
0.5
0.5
0.5
Saponification value
mgKOH/gr
ASTM D 1962
105В±5
95В±5
85В±5
Molecular Weight
kg/Kmole
ASTM D 4252
510-561
561-623
623-701
Viscosity ( 25 В°C)
cSt
ASTM D 445
50-65
60-75
70-85
Density ( 25 В°C)
gr/L
ASTM D 1298
1.01-1.02
1.02-1.03
1.03-1.04
HLB
-----
Calculated
12.5-13.8
12.7-14.1
12.6-14.1
O
(1) - 10% Solution in BDG at 25 C
14
Shazand (Arak)
Petrochemical
Company
Lauryl Alcohol Ethoxylate (LAE)
Properties
Unit
Test method
FAL-2EO
FAL3EO
FAL-5EO
FAL-7EO
FAL-9EO
Color
APHA
ASTM D 1209
50 Max.
50 Max.
50 Max.
50 Max.
50 Max.
Cloud Point (1)
O
C
Ballestra HA1
50 - 52
60 - 62
71 - 73
52 - 56
79 - 81
PH ( 5 % in Water )
-----
ASTM D 1172
5 - 7
5 - 7
5 - 7
5 - 7
5 - 7
Water content
%Wt
Ballestra B – Z6
0.1 Max.
0.1 Max.
0.2 Max.
0.5 Max.
0.5 Max.
Hydroxyl Number
mgKOH/gr
ASTM D 4252
193 - 199
168 - 174
131 - 137
104 - 115
93 - 98
Molecular Weight
kg/Kmole
Calculated
282 - 291
322 - 334
410 - 428
488 - 540
572 - 603
Viscosity (50 В°C)
cSt
ASTM D 445
8 - 10
10 - 12
17 - 19
-
24 - 26
Density (25 В°C)
gr/L
ASTM D 1298
0.87 - 0.89
0.9 - 0.92
0.93 - 0.95
-
0.98 - 1.00
-----
Calculated
5.9 - 6.2
7.9 - 8.2
10.3 - 10.7
12.1 - 12.5
13.1 - 13.8
HLB
O
(1) - 10% Solution in BDG at 25 C
15
Shazand (Arak)
Petrochemical
Company
BUTADIENE/BBR
1,3 Butadiene
Properties
Unit
Spec
Test Method
1,3 Butadiene
WT%
99.5 Min
AN-JG-NO.1
(Trans + Cis)-2 Butene
WT%
0.5 Max
AN-JG-NO.1
Total Acetylenes
PPM
50 Max
AN-JG-NO.1
1,2 – Butadiene
PPM
20 Max
AN-JG-NO.1
TBC
PPM
50 Min
ASTM D 1157 - 84
Butane – Butene Raffinate ( BBR )
Properties
Unit
Spec
Test Method
I - Butene
WT%
65 Min
ASTM D 2426
1 - Butene
WT%
20 Max
ASTM D 2426
N & I Butane
WT%
4.96 Max
ASTM D 2426
C3 Cut
WT%
0.23 Max
ASTM D 2426
Trans -2- Butene
WT%
7.48 Max
ASTM D 2426
Cis -2- Butene
WT%
3.03 Max
ASTM D 2426
1, 3 Butadiene
WT%
0.3 Max
ASTM D 2426
16
Shazand (Arak)
Petrochemical
Company
17
Shazand (Arak)
Petrochemical
Company
C4 - CUT/BUT - 1
C4 – CUT
Properties
Unit
Spec
Test Method
1,3-Butadiene
1 & I-Butene
WT%
47-53
AN-JG-NO.1
WT%
43 MAX
AN-JG-NO.1
N & I-Butane
WT%
2.7 MAX
AN-JG-NO.1
Methyl Acetylene
WT%
0.14 MAX
AN-JG-NO.1
Ethyl Acetylene
WT%
0.55 MAX
AN-JG-NO.1
Vinyl Acetylene
WT%
2.05 MAX
AN-JG-NO.1
1,2 – Butadiene
WT%
0.5 MAX
AN-JG-NO.1
Trans- 2 – Butene
WT%
3.5 MAX
AN-JG-NO.1
Cis -2- Butene
WT%
4.5 MAX
AN-JG-NO.1
C-5
WT%
0.3 MAX
AN-JG-NO.1
Butene-1
Properties
Purity
Unit
Spec
WT%
99 Min
Carbon Monoxide
PPM VOL
1 Max
Carbon Dioxide
PPM VOL
2 Max
Ethane
PPM VOL
600 Max
Ethylene
PPM VOL
500 Max
Other Butenes or Butanes
PPM VOL
10000 Max
C6 (Not Cyclic)
PPM VOL
50 Max
18
Shazand (Arak)
Petrochemical
Company
19
Shazand (Arak)
Petrochemical
Company
OLEFINS
Cracked Fuel Oil (CFO)
Properties
Unit
Test Method
Value
Flash Point
Viscosity@100 В°C
Specific gravity@15В°C
В°C
Cst
----
ASTM D 93
ASTM D 88
ASTM D 1298
80 Min.
3-15
1.01-1.06
ppm wt
ASTM D 482
150 Max.
Sulfur
%WT
ASTM D 5453
0.5 Max.
Carbon Content
%WT
ASTM D 5291
80 Min.
ASH
Hydrogenated Pyrolysis Gasoline (HPG)
Properties
Specific gravity@15В°C
Color Saybolt
R.V.P
I.B.P
F.B.P
Aromatics
Total Sulfur
Copper Corrosion
Lead Content
Unit
Test Method
Value
----Psi
В°C
В°C
%WT
ppm wt
---
ASTM D 1298
ASTM D 156
ASTM D 323
ASTM D 86
ASTM D 86
By GC
ASTM D 3120
ASTM D 130
0.78 - 0.84
+ 5 Min.
5 - 12
34 Min.
210 Max.
50 Min.
300 Max.
No. 1a
ppb
ATOMIC
5 Max.
C6 CUT Product
Properties
Unit
Test Method
Value
Benzen
%WT
By GC
80 Min.
gl2/100g
UOP 326
2 Max.
DN Value
20
Shazand (Arak)
Petrochemical
Company
21
Shazand (Arak)
Petrochemical
Company
POLY BUTADIENE RUBBER
High CIS 1,3 - Polybutadiene Rubber ( Grade 1220 )
* Raw Material
Typical Properties
CIS Content
Raw Mooney Viscosity
Volatile Material
Ash Content
Test Method
Unit
Value
ZEON R - 130A
ASTM D - 1646
ASTM D - 1416
ASTM D - 1416
WT%
ML- 4
WT%
WT%
MIN 97
41 -49
MAX 0.5
MAX 0.3
** Compound Properties
Typical Properties
Compound Mooney Viscosity
Tensile (35 min)
Elongation (35 min)
300% Modulus at 145В°C
25 min
35 min
50 min
Rheometer at 160В°C
MH
ML
TS-1
T50
T90
Test Method
Unit
Value
ASTM D - 1646
ASTM D - 412
ASTM D - 412
ML- 4
Kgf/cm3
%
ASTM D - 412
Kgf/cm3
MAX 77
MIN 150
MIN 440
--68 - 108
74 - 114
74 - 114
Ibf in
Ibf in
MIN
MIN
MIN
32.0 - 40.0
5.2 - 11.2
2.1 - 6.1
6.0 10.4
8.3 - 13.1
Test Method
Unit
Value
ASTM D - 3189
PART
PART
PART
PART
PART
PART
PART
В°C
100
60
3
2
0.9
1.5
15
145
ASTM D - 3189
Compound Recipe
Typical Properties
Raw BR - 1220
HAF Carbon (IRB No.6)
Zinc Oxide
Stearic Acid
Accelerator (TBBS)
Sulfur
Highly Aromatic Oil
Vulcanization Temperature
Other Specifications
Typical Properties
Test Method
Unit
Value
Anti Oxidant
Non Staining - High Quality
Catalyst Type
Cobalt
Packaging
35 Kg Bales, Wrapped in 50 Micron LDPE Film & Each 36 Bales are in a Box Pallet
*Certified Properties
**Values shown are averages & are not to be considered as product specifications.
22
Shazand (Arak)
Petrochemical
Company
Specification of chemicals used in the compound
High Cis1,3-Polybutadiene (Grade 1220)
Carbon Black HAF:
Zinc Oxide (White Zinc):
Stearic Acid:
Oil:
Accelerator (TBBS):
Sulfur:
IRB No. conforming to NBS-SRM No. 378
NBS-SRM No. 370 JIS K-1410 No. 1
NBS-SRM No. 372 Fractional fatty acid of JIS K- 3341
ASTM oil type 103 (sansen 4240 of Japan sun oil Co.)
U.S. monaanto’s santocure-NS conforming to NBS-SRM No. 384
NBS-SRM No. 371, one type of JIS K-6222.325 meah product
Composition:
BR-1220 is a stereo specific high Cis-1, 3 polybutadiene. It is manufactured by a solution process using a cobalt
catalyst which produces polymers with a low level of impurities. BR-1220 contains a non-staining high quality
stabilizer system, too.
Applications:
BR-1220 is used for the production of tire, footwear, belts, rubber hoses & other mechanical rubber products.
Storage:
BR-1220 should be stored in an adequately ventilated area where it will not be subjected to sunlight, extreme
temperatures or sources of ignition.
Under the above-mentioned conditions BR-1220 should have a storage life of at least 6 months from the date of
production.
23
Shazand (Arak)
Petrochemical
Company
BUTADIENE RUBBER
High CIS 1,3 – Polybutadiene Rubber (Grade 1210s )
Raw Material
Typical Properties
Test Method
Unit
Value
CIS Content
ZEON R - 130A
WT%
MIN 97
Raw Mooney Viscosity
ZEON R - 007B
ASTM D - 1646
ML- 4
35-45
Volatile Material
ZEON R - 001B
ASTM D - 1416
WT%
MAX 0.5
Ash Content
ZEON R - 130A
ASTM D - 1416
WT%
MAX 0.3
Solution Viscosity 5% in Styrene@ 25 В°C
Color Index 5% in Styrene
RX-011A
Cps
50-70
ASTM D - 1209
APHA
MAX.30
Other Specifications
Typical Properties
Gel content
Low
Antioxidants type
Non Staining - High Quality -Food Grade
Catalyst type
Cobalt
Standard packaging
35 Kg Bales in Modified P.S. film & Each 36 Bales are in a Box
Pallet
Storage life
12 month
Compostion:
BR – 1210s is a stereo specific high CIS – 1,4 polybutadiene . It is manufactured by a solution process using a cobalt
catalyst which produces polymers with a very light colour & low level of impurities . BR – 1210s contains a non-staining
high quality stabilizer system which complies with compositional requirement of the food packaging regulation .
Applications:
BR -1210s used for the production of toughened polystyrene employing grafting porcesses.
Storage:
BR- 1210s should be stored in an adequately ventilated area where it will not be subjected to sunlight,extreme
temperatures or sources of ignition .
Under these conditions BR– 1210s should have a storage life of at least 12 months from the date of production .
24
Shazand (Arak)
Petrochemical
Company
25
Shazand (Arak)
Petrochemical
Company
POLYETHYLENE
High Density Polyethylene (HDPE)
Extrusion- PIPE (Basell license)
MFR(gr/10min)
(5kg,190OC)
Density
(gr/cm3)
Application
AM 5010 T2 N (EX3)
0.45
0.945
PE-80 Pressure pipe, e.g. drinking water and gas pipes, waste pipes and sewer pipes, their fittings and also sheets (natural grade).
AM 5010 T2 B (EX3B)
0.45
0.954
PE-80 Pressure pipes ,e.g. drinking water and gas pipes, waste pipes and
sewer pipes, their fittings and also sheets(black grade)
AM 5010 T3 N
0.43
0.944
High quality PE-80 pressure pipe for gas and water transportation (natural grade).
AM 5010 T3 B
0.43
0.954
High quality PE-80 pressure pipe for gas and water transportation (black grade).
Grade Name
AM CRP 100 N
(PE - 100 W)
0.22
0.948
Top quality PE-100 pressure pipes for gas and water transportation at higher
pressures or with thinner walls as PE-80(natural grade).
AM CRP 100 B
PE - 100 B
0.22
0.957
Leading PE-100 for pressure pipes for all purposes for gas, water and sewage
transportation (black grade).
AM CRP 100 Blue
(PE - 100 Blue)
0.22
0.948
Leading PE-100,specially for drinking water(blue marker)
26
Shazand (Arak)
Petrochemical
Company
Extrusion -Blow Molding (Basell license)
MFR(gr/10min)
Density
(5kg,190OC)
(gr/cm3)
6
0.957
Milk bottles and shakers for powder
AH 4765
(BL3 VD)
1.5
0.959
For hollow articles where high stress cracking resistance
is not demanded, such as bottles and containers up to 10
liters, e.g. for fabric softeners.
AF 4760
(BL3)
1.2
0.954
Containers with capacities ranging from a few ml up to 10
also for thermoforming. Also for production of sheets for
thermoforming.
AF 4750
(BL2)
1
0.946
For disinfectant bottles up to 2 liters. Tubes for cosmetics,
containers up to 10 liters and petrol cans up to 5 liters.
AM 8255
(BL4)
0.28
0.953
General purpose grade for containers from 1L to 200L
capacity
AM 7746
(BL5)
0.24
0.944
Large containers above 10L capacity and for the
production of semi finished stock.
AM 7255
(BL6)
0.11
0.952
Large containers above 5L capacity and for the production
of semi-finished stock.
Grade Name
AD 4760 ( BL1)
Application
Extrusion - Tubular film (Basell licensWe)
MFR(gr/10min)
Density
(5kg,190OC)
(gr/cm3)
AM 9450 F
(EX5)
0.28
0.949
For blown films with paperlike quality, suitable for
counter bags, carrier bags and wrapping films,
excellent processing.
AM 9450 F1
(EX5 HS)
0.24
0.950
For blown films with paperlike quality, suitable for
counter bags, carrier bags and wrapping films,
excellent processing and sealability.
AM 9455 F
(EX4)
0.28
0.956
For blown films with paperlike quality, suitable for
counter bags, carrier bags and wrapping films,
excellent processing stiffer than HM 9450 F.
AM 9455 F1
(EX4 HS)
0.24
0.957
For blown films with paperlike quality, suitable for
counter bags, carrier bags and wrapping films,
excellent processing, stiffer than HM9450 F1.
0.18
0.944
For blown films with paperlike quality, suitable for
counter bags, carrier bags and wrapping film, excellent
processing with high tenacity.
Grade Name
AM 9445 HT
(EX6 HT)
Application
27
Shazand (Arak)
Petrochemical
Company
HDPE-Injection Molding (Basell license)
MFR(gr/10min)
Density
(5kg,190OC)
(gr/cm3)
AA 7260 (I1)
52
0.957
Light weight household and disposable articles
AB 6450 (I2)
28
0.950
Household articles less hard and less rigid than I1
AC 7260 (I3)
23
0.957
Transport and stacking crates, particular bottle crates
AD 7255 (I4)
11
0.954
Tick walled, highly stressed transport containers, e.g.
refuse bin and fish crates, screw caps and cable clips.
Grade Name
Application
HDPE-Injection Molding (Innovene license)
MFR(gr/10min)
Density
(2.16kg,190OC)
(gr/cm3)
HD 5120 EA
2.3
0.950
Heavy duty and High ESCR application.
HD 5740 UA
4
0.955
UV resistance for thick components such as large refuse
bins and pallets, boxes and dust bins.
HD 5050 EA
4.5
0.950
Heavy duty, High ESCR applications such as screw
stopper. Caps & closures.
HD 5050 UA
4.5
0.950
Large dust bins & pails. Pallet boxes.
Products with high ESCR and UV resistance.
HD 6070 EA
7
0.958
General purpose grade for rigid items such as fish boxes,
Crates and tote boxes.
HD 6070 UA
7
0.958
UV stabilized for rigid items such as fish boxes, Crates and
toys.
HD 5211 EA
11
0.949
Thin component, such as houseware and toys
HD 5211 UA
11
0.949
UV stabilized for thin component, such as houseware and
toys
HD 5813 EA
13
0.954
Components requiring high rigidity, houseware and crates.
HD 5813 UA
13
0.954
UV stabilized for components requiring high rigidity,
houseware and crates.
HD 5218 EA
18
0.952
Thin components such as food container, houseware and
toys.
HD 5620 EA
20
0.956
General purpose.
HD 5226 EA
26
0.953
Thin wall injection application, housewares, caps and
closures.
HD 5150 EA
55
0.958
High flow applications, Houseware, Food packaging.
Grade Name
28
Shazand (Arak)
Petrochemical
Company
Application
Extrusion - Stretched Film and tape (Basell license)
MFR(gr/10min)
Density
(5kg,190OC)
(gr/cm3)
AF 7740 F
(EX 1)
1.6
0.944
Stretched films and tapes for production of high quality
knitted and woven.
AF 7740 F2
(EX1 S)
1.8
0.944
Tapes to be used for agricultural packaging and as
protective cover.
Grade Name
Application
Extrusion - Filment (Basell license)
Grade Name
AF 7750 M2
(EX2 S)
MFR(gr/10min)
Density
(5kg,190OC)
(gr/cm3)
3.3
0.956
Application
Monofilament for fishing notes, geo textiles and civil
engineering.
Extrusion - Filment (Innovene license)
Grade Name
HD 5710 AA
MFR(gr/10min)
Density
(2.16kg,190OC)
(gr/cm3)
0.9
0.957
Application
Ropes, nets, knitted sacks, woven fabrics.
Extrusion - Cable Insulation (Basell license)
Grade Name
AF 7450 K
(EX 7C)
MFR(gr/10min)
Density
(5kg,190OC)
(gr/cm3)
3.5
0.946
Application
Wire and cable insulation
29
Shazand (Arak)
Petrochemical
Company
LINEAR LOW DENSITY POLYETHYLENE (LLDPE)
C4 - LLDPE-Blown Film (Innovene license)
MFR(gr/10min)
Density
(2.16kg,190OC)
(gr/cm3)
LL 0205 AF
0.5
0.920
Produce bag, medium duty sacks, refuse sacks,
agricultural film.
LL 0205 HF
0.5
0.920
Liner bag, medium duty sacks, refuse sacks, agricultural
film.
LL 0209 AF
0.9
0.920
Sealing layer, lamination, carrier and industrial bags.
LL 0209 AA
0.9
0.920
Liner bags, builders reel, Co-extrusion, shrink silage, green
house and mulch film.
LL 0209 KJ
0.9
0.920
Liner bags, deep freeze film, garment wrap, refuse and
heavy duty sacks.
LL 1209 AA
0.9
0.920
Lamination film.
LL 1209 KJ
0.9
0.920
Lamination film, display packaging, co-extrusion
LL 0410 AA
1
0.925
Thin film, shrink film. Blending component with PP.
LL 0410 KJ
1
0.925
Thin film, carrier bags, garment wrap.
Grade Name
Application
C6 - LLDPE-Blown Film (Innovene license)
MFR(gr/10min)
Density
(2.16kg,190OC)
(gr/cm3)
LL 6206 AF
0.6
0.920
Heavy duty sacks , agricultural film , mulch film
LL 6206 LJ
0.6
0.921
Mulch film , mailing film
LL 6209 KJ
0.9
0.921
carrier bags , mailing film , refuse bag
LL 6409 AA
0.9
0.924
Lamination , sealing layers in co-extrusion
LL 6409 KJ
0.9
0.925
Lamination , sealing layers in co-extrusion
Grade Name
Application
C4 - LLDPE-Cast Film (Innovene license)
MFR(gr/10min)
Density
(2.16kg,190OC)
(gr/cm3)
LL 0220 AA
2.2
0.920
Stretch wrap, Oriented Tape. Base resin for power cable
compound insulation (low voltage), fiber optic jacketing.
LL 0640 AA
4
0.93
High quality cast films for display packaging, non
cling layer for stretch film. Base resin for power cable
compound insulation (low voltage), fiber optic jacketing.
LL 0640 KJ
4
0.929
High quality cast films such as display packaging, non
cling layer for stretch film.
Grade Name
30
Shazand (Arak)
Petrochemical
Company
Application
C4-MDPE- Rotational Molding (Innovene license)
MFR(gr/10min)
Density
(2.16kg,190OC)
(gr/cm3)
HD 3840 UA
4
0.938
Tanks, containers and silos up to 30000 liters, technical
parts, agricultural application.
HD 2840 UA
4
0.928
Tanks, containers and silos up to 30000 liters, technical
parts, agricultural application.
HD 3560 UA
6
0.935
Tanks, containers and silos up to 30000 liters, technical
parts, agricultural application.
Grade Name
Application
LLDPE-Injection Molding (Innovene license)
MFR(gr/10min)
Density
(2.16kg,190OC)
(gr/cm3)
BD 24250 AA
25
0.926
Housewares, boxes and closures.
BD 30500 AA
50
0.930
Housewares, boxes and closures.
Grade Name
Application
31
Shazand (Arak)
Petrochemical
Company
POLYPROPYLENE-HOMOPOLYMER
PP-Homopolymer-Fibre
Grade Name
MFR
(gr/10min)
Properties
Application
(2.16kg,230OC)
F20S
11
Medium gas – fading
resistance.
BCF and CF multifilament, medium- low
denier staple yarn, trilobe sections
F39S
12
General purpose
with high gas –
fading resistance.
Wool staple fiber, heavy denier CF
multifilament.
HP554N
12
Outstanding spin
ability, superior
thermo-bonded
properties &
excellent anti-gas
fading properties
Fine denier staple fibers for non woven,
thermo-bonded fabrics. Feminine care
products, medical disposables and
filters.
HP500N
12
Good processability
& constant, high flow
during extrusion.
Wool staple fiber, heavy denier CF, multifilament for ropes, belts & straps and
decorative ribbons.
18
Good flow, medium
MWD.
Fine denier staple fibres, thermo-bonded
non-woven fabrics, upholstery and
hygiene, Diapers, incontinence pads,
feminine care.
18
Good flow, Medium MWD, Anti gas
fading
Fine denier staple fibres, thermo-bonded
non-woven fabrics, upholstery and
hygiene, Diapers, incontinence pads,
feminine care.
25
High flow, medium
MWD.High stretch
ratio and gives tough
and resilient fibres
and Anti gas fading.
Short & long spinning, low denier staple
fiber, BCF and CF multifilament, low
denier staple fibres for non-woven
fabrics, medical-sanitary applications
and wipes, carpet face yarns ,
backpacks, big bag handles and safety
belts.
High flow, medium
MWD.
Fine denier cotton staple fiber, high
speed short spinning operations.
Coating of woven PP film yarn fabrics
and paper coating. Injection moulding for
household articles, toys and packaging.
V30S
HP554P
HP552R
H30S
32
Shazand (Arak)
Petrochemical
Company
35
PP-Homopolymer-Spun Bond
Grade Name
MFR
(gr/10min)
Properties
Application
(2.16kg,230OC)
HP562R
HOXP2004
HP565S
25
Spun-bond
grade with very
narrow MWD and
very high speed
production.
Low denier CF for spun bonding, non
woven fabrics, diapers, medical and
sanitary tissues.
35
High fluidity
spun-bond
grade with very
narrow MWD and
anti-gas fading
performance.
Low denier CF for spun bonding, non
woven fabrics, diapers, medical and
sanitary tissues. High output and high
tenacity fibers.
38
Very high flow
spun bond grade
with narrow MWD.
Fine denier non-woven such as Nonwoven fabrics for industrial and medical
applications. Backing and lining for
furniture and carpet industries.
33
Shazand (Arak)
Petrochemical
Company
PP-Homopolymer-Injection Molding
Grade Name
MFR
(gr/10min)
Properties
Application
(2.16kg,230OC)
D50G
0.3
Excellent long –
term heat ageing
resistance, high
mechanical
properties.
Q30G
0.7
Particular molding
purpose.
Technical items such as cops & clothespins
1.8
High stiffness
and good impact
strength, excellent
processability.
Appliance components, textile bobbins,
wheels, fitting, closures, caps.
3.2
High stiffness &
fairly good impact
strength with good
processability.
Technical items such as parts for small
appliances & automotive industry. House
wares, caps, closures, small containers,
toys. It is also used for compounding
6
Easy processing &
high stiffness.
Household articles, small containers,
crates, garden furniture, stadium seats,
toys, caps, closures. Components for
appliances & automotive industry.
8
Easy processing &
high stiffness.
Household articles, food containers,
crates, garden furniture, toys, caps,
closures. Components for appliances &
automotive industry.
12
Good flow, good
dimensional
stability & high
stiffness.
Consumer goods such as food containers,
vacuum flasks, flower pots, garden
furniture & small appliances. in the medical
sector It can be used for 3-part syringes &
a wide range of health care items.
HP500P
16
Good flow & easy
mold filling & short
cycle times and
high stiffness.
Thin-walled articles with long flow
path such as containers, boxes, caps,
closures.Polymer base for compounding
& masterbatches.
Z11G
25
Suitable for medical gamma rays
sterilization.
Syringes and hospital articles
26
Very good
processability and
high stiffness.
Thin-walled containers & general
purpose packaging items, vacuum
flasks, kitchen articles. Compounding &
masterbatches.
35
High melt flow
homo-polymer
with a narrow
molecular weight
distribution and
optimum antistatic
properties.
Thin-walled items such as video
cassette boxes & small appliances.
HP502H
HP500J
HP500L
HP500M
HP502N
HP300R
HP648S
34
Shazand (Arak)
Petrochemical
Company
Injection molding of wheels, fittings
and high performance items are other
application.
PP-Homopolymer-Extrusion Thermoforming & Blow Molding
Grade Name
MFR
(gr/10min)
Properties
Application
(2.16kg,230OC)
D60P
HP501D
S60D
HP500H
HP640H
T31SE
0.3
Excellent longterm heat ageing
and detergents
resistance. High
mechanical
properties
Pressure pipes, extruded and cast
sheet.
0.7
Excellent
processability with
an outstanding
mechanical
properties
balance.
Technical extrusion for strapping,
sheet, profiles, nets and small diameter
pipes such as refills for ball pens.
Blow molding small and medium sized
containers.
1.8
Excellent longterm heat stability
with detergent
resistance.
Extruded sheet, blow molded technical
items (such as tanks).
1.8
Excellent process
ability with high
stiffness.
Thermoforming such as drinking
beakers, packaging for dairy products,
nursery flower pots& trays for fruits,
biscuits & chocolates .Film yarn, both
with cast and tubular process, mono
filaments, Strapping, extruded nets,
blow molded small containers.
2
Very high stiffness,
excellent contact
clarity, high gloss
and good antistatic
& excellent
organoleptic
properties.
Hot fill applications and thermoforming
vending cups, blister packs, pots for
dairy products and trays for biscuits,
chocolates, and fruits.
High stiffness,
excellent
processability,
good contact
clarity and high
gloss.
Sheet for thermoforming. Vending
cups, packaging for dairy products,
trays for biscuits, chocolates and fruits.
Co-extruded multilayer sheet with high
barrier properties to produce retortable
containers.
3.2
35
Shazand (Arak)
Petrochemical
Company
PP-Homopolymer-Film Yarn and Monofilament
Grade Name
MFR
(gr/10min)
Properties
Application
(2.16kg,230OC)
S30SW
S33LS
HP550J
HP510L
1.8
Excellent
processability with
high stiffness, low
water carry over
Textile Film yarn, ropes, extruded nets.
1.8
High mechanical
properties and
medium UV
resistance.
Textile Film yarn, ropes, twins for
agricultural use.
Outstanding
processability with
good mechanical
properties.
Film yarn, both with cast & tubular
processes for the production of carpet
backings, bags, industrial fabrics,
mats & artificial grass, baler twines,
packaging twines & ropes. Monofilament
used for instance for brush & broom
filling. Extrusion of nets for various
purposes .Stiff sheet for high quality
thermoforming such as vending cups,
packaging for dairy products & trays for
fruit, biscuits & chocolates.
Outstanding
processability with
good mechanical
properties.
Film yarn cast process for baler
twins, packaging twins and ropes.
Monofilament used in brush and broom
filling and technical applications.
Monolayer or co-extruded film for
packaging. Thin sheet for stationary
folders and sheets for thermoforming
and extrusion of straws.
3.2
6
PP-Homopolymer-Cast Film
Grade Name
MFR
(gr/10min)
Properties
Application
(2.16kg,230OC)
X30S
36
Shazand (Arak)
Petrochemical
Company
9
Good
processability in
cast process.
Single layer and coextruded film for food
packaging, textile wrapping, stationary
and editorial application.
PP-Homopolymer-Bioriented Film
Grade Name
MFR
(gr/10min)
Properties
Application
(2.16kg,230OC)
1.8
Excellent
processability and
low water carryover. High gloss
& transparency.
Good optical
properties.
Film for packaging, special grade
for metallization. Monolayer and
co extruded film. Also suitable for
lamination to other flexible films.
S38F
1.8
High transparency
and gloss. Very
stable extrusion.
Good mechanical
properties.
Monolayer films are used for food
packaging, textiles packaging and
flower wrappings, double bubble lines,
adhesive tapes. BOPP films are used for
lamination to other flexible films.
S38FT
1.8
Excellent processability on tubular
lines.
Adhesive tapes. Packaging in general.
2.5
Excellent
processability on
cast lines, high
transparency and
gloss.
Monolayer films are used for food
packaging, textiles packaging and also
for medical application.
S28F
T36F
37
Shazand (Arak)
Petrochemical
Company
POLYPROPYLENE-RANDOM COPOLYMER
PP-Random Copolymer-Injection Molding
Grade Name
MFR
(gr/10min)
Properties
Application
(2.16kg,230OC)
EP2X83CI
EP2YX29GA
RP340R
10
Excellent clarity
and gloss.
Transparent house wares, food storage
containers and packaging cosmetics
and lids, caps and closures.
10
Excellent flow
and antistatic
properties
with very high
transparency and
gloss.
Containers and thin-walled packaging
with high clarity for food, cosmetics and
pharmaceutical products. It also can
replace PS whilst adding low weight, low
odour transfer, chemical resistance and
impact strength.
High melt flow and
outstanding transparency and gloss.
Packaging for food and cosmetics,
pharmaceutical products. Injection
molded items for the medical sector
such as syringes, test tubes and vials.
Suitable for injection stretch blow
molded containers and bottles.
25
PP-Random Copolymer-Cast and Blown Film
Grade Name
MFR
(gr/10min)
Properties
Application
6
Good
processability,
excellent clarity
and gloss and very
good heat weld
ability.
Lamination to PP-film or other materials
such as PA, polyester or aluminum.
Packaging of foodstuffs and books,
stationery, shirts and hosiery.
8
Excellent
processability,
high clarity and
gloss and good
heat weld. Without
slip or antiblock
agents.
Lamination to BOPP film or other
materials. Packaging of foodstuffs and
books, stationery, shirts and hosiery.
Injection molding caps and closures
8
Formulated with
slip and antiblock and exhibits
excellent antistatic.
Excellent process
ability, high clarity
and gloss and
good heat weld
ability.
Quality packaging as monolayer film
or as welding layer on co-extruded
structures. Lamination to BOPP film or
other materials. Packaging of foodstuffs,
books, stationery, shirts and hosiery.
(2.16kg,230OC)
RP210M
RP310M
RP316M
38
Shazand (Arak)
Petrochemical
Company
PP-Random Copolymer-Bioriented Film
Grade Name
MFR
(gr/10min)
Properties
Application
(2.16kg,230OC)
EP2S34F
RP129K
EP3X37F
Excellent
processability on
tubular lines, slip
agent modified
Packaging of bread and other foodstuffs
with heat-shrinkable film
5
Low sealing
temperature
and, slip agent
modified. very
high transparency,
excellent gloss
and outstanding
heat weld ability.
Suited for metallized BOPP films
include packaging for foodstuffs and
confectionary and medical applications
drinks labels and liquor cartons.
8
Low sealing
temperature, slip
and anti-blocking
modified with very
high transparency,
excellent gloss
and outstanding
heat weld ability
and show good hot
tack.
Quality packaging for food, stationery,
cosmetics, clothes and cigarettes.
Suitable for the production of shrinkable
co-extruded BOPP film for display
packaging of foodstuff products.
1.8
39
Shazand (Arak)
Petrochemical
Company
PP-Random Copolymer-Extrusion
Grade Name
MFR
(gr/10min)
Properties
Application
(2.16kg,230OC)
ARP230
0.2
High heat and
extremely high
extraction
stability.
EP2X83CE
1.8
Excellent clarity
and gloss.
Bottle for detergents and toiletries, flat
mineral water, jars for condiments and
preserves.
1.8
High cracking
and chemical
resistance.
Film for packaging & sheet for stationery
folders and displays. Extrusion blow
molding of high gloss monolayer bottles,
packaging of cosmetics, detergents,
chemicals and food-stuffs.
1.8
Low flow with
a conventional
MWD and
is specially
formulated with
an additive
package that
enhances clarity.
Blow-molded articles, extruded sheet
and profiles with good melt strength,
excellent clarity, excellent gloss and
good regrind stability.
1.8
High
transparency and
gloss, excellent
processability &
can be converted
on form-fill-seal
equipments.
Blow molded medical articles.
transparent bottles & containers
for blood, intravenous solutions,
pharmaceutical solutions, medicines
& salves. Packaging for health
care products. Film & sheet for
thermoforming.
RP210G
RP240G
RP270G
40
Shazand (Arak)
Petrochemical
Company
Sanitary pipes for cold & hot water,
industrial and chemical pipes. Other
applications are pipe fittings and profiles.
POLYPROPYLENE-HIGH IMPACT COPOLYMER
PP-High Impact Copolymer-Extrusion
Grade Name
MFR
(gr/10min)
Properties
Application
(2.16kg,230OC)
EPD60R
EP310D
EPYS30RE
0.35
Superior
toughness
even at low
temperatures.
Very high impact
strength, extra
heat stability
and detergent
resistance.
Blow molding for appliance components,
wheels, under the hood automotive
parts, toolboxes, suitcases and large
containers. Profiles, sewage pipes and
tough sheet for industrial applications.
Thermoforming trays for cold storage.
0.8
Smooth process
ability and high
mechanical
properties. Good
stiffness and
very high impact
strength, even at
-20 OC.
Film for adhesive tapes and lamination
to paper and other resins. Extrusion
blow molded containers for detergents,
toiletries and foodstuffs. Corrugated
board, smooth and corrugated
pipe and sheet for thermoforming.
Injection molding items with very good
mechanical properties balance.
1.3
Smooth process
ability, good
stiffness and
outstanding
impact resistance,
even at -20 OC.
Corrugated board and sheet for
thermoforming. Blow molded bottles and
containers for detergents and foodstuffs
and technical parts for the automotive
and appliance industries.
41
Shazand (Arak)
Petrochemical
Company
PP-High Impact Copolymer-Injection
Grade Name
MFR
(gr/10min)
Properties
Applications
(2.16kg,230OC)
EPS30R
EP200K
EP300K
EP540L
EPC40R
EP440N
42
Shazand (Arak)
Petrochemical
Company
1.5
High impact
strength, excellent
processing
characteristics.
Crates, paint fails, heavy duty
packaging.
3.5
Outstanding
processability with
extremely high
impact resistance
and very high
toughness.
Furniture and suitcases, sport and
bicycle parts. Boxes, containers,
pallets, crates, pails and lids. Bitumen
modification and compounding
applications.
3.5
Medium – high
flow, excellent
balance between
flow, very high
impact strength
and good stiffness.
Medium sized containers, buckets,
pails, crates for cold storage.
Household articles. Small appliance,
automotive and industrial application.
Seats, chair shells, toys, suitcases.
Thermoforming multilayer container for
dairy products.
6
Excellent balance
of stiffness, impact
strength (even at
low temperatures)
and process ability.
Crates, caps and thin-walled packaging
for cold shelf presentation. Automotive
& Appliance parts, wheels, furniture,
chair shells and stadium seats. Cast
film for stationery.
7
Excellent balance
of mechanical
properties &
process ability
& features an
excellent long-term
heat–stability. Very
high resistance
to chemicals &
crazing.
Automotive components such as
battery cases, brake fluid reservoirs,
wash water reservoirs, dashboard
supports, luggage compartment trims &
door trim panels.
12
Improved
mechanical
property balance
and outstanding
stiffness.
Combines superior
stiffness with high
impact strength,
even at low
temperatures.
Packaging, automotive and consumer
goods industries such as luggage, paint
pails, buckets, crates, batteries and
large toys.
Grade Name
MFR
(gr/10min)
Properties
Applications
(2.16kg,230OC)
EPF30R
EP548R
EP740R
EPH31RA
EP548S
EP348U
EP648V
13
Outstanding
stiffness and high
impact strength
with high flow
properties.
Packaging, automotive and consumer
goods industries, household articles
and closures.
21
High stiffness,
good impact
resistance, high
dimensional
stability and
excellent antistatic
properties.
Thin-walled or long flow path articles
such as flower pots, filters, filters
housings and appliance components.
25
High stiffness,
good impact
resistance, high
dimensional
stability and
excellent antistatic
properties.
Thin-walled or long flow path articles
such as flower pots, filters, filters
housings and appliance components.
40
High stiffness,
good impact
resistance,
outstanding
organoleptic
properties and
excellent antistatic
properties.
Thin-walled packaging such
as margarine tubs and pots for
mayonnaise and dairy or fatty products.
Caps, closures and flower pots,
appliance components, and cool boxes.
45
Nucleated with
anti-static agent.
Outstanding
balance of
mechanical
properties and
high fluidity.
Extensively used in house wares
and in thin-walled containers for food
packaging (e.g. margarine tubs, yoghurt
pots, etc.).
70
Very high melt flow
rate. Excellent
impact resistance,
even at low
temperatures and
effective antistatic.
Low shrinkage and
minimal wrapage.
Packaging for margarine tubs, pots for
dairy products, ice-cream containers,
trays, video cassette envelopes, caps
and closures, Lunch-boxes, cool boxes,
laundry baskets, and flower pots.
100
Ultra high fluidity.
Good stiffness/
impact balance,
good dimensional
stability and
outstanding
antistatic
properties.
Packaging, house wares and garden
furniture. Items with long flow paths
such as laundry bins, drawer trays,
video boxes, margarine tubs and
packaging for dairy products.
43
Shazand (Arak)
Petrochemical
Company