【北海道まで送料一律】 SHAGGY 【4.5帖用】本物志向の質感。超ソフトな

Product Data Sheet
HAT-8P
Product Designation
Product Group:
Product Sub-Group:
Main Industry Segments:
Belt Applications:
Special Features:
Mode of Use/Conveyance:
High duty conveyor and processing belts
Rubber conveyor and processing belts
Materials Handling; Packaging; Paper converting; Paper manufacturing and
processing; Paper printing and finishing
General conveying belt; Machine tape; Paper handling belt
Abrasion resistant; Constant coefficient of friction; High friction surface; Oil resistant
Declined; Horizontal; Inclined
Product Design (enlarged)
Product Construction/Design
Conveying Side (Material):
Conveying Side (Surface):
Conveying Side (Property):
Conveying Side (Color):
Traction Layer (Material):
Number of Fabrics:
Running Side/Pulley Side (Material):
Running Side/Pulley Side (Surface):
Running Side/Pulley Side (Color):
Acrylonitrile-Butadiene-Rubber (NBR)
Rough textile structure
Adhesive
Green
Polyamide (PA)
2
Polyurethane cross-linked (PUR)
Impregnated fabric
Black
Product Characteristics
Slider bed suitable:
Carrying rollers suitable:
Power turns, curved installations:
Nosebar suitable:
Permanently antistatic:
Metal detector suitable:
Flammability:
Food suitability, FDA conformance:
Food suitability, USDA recommendations:
Food suitability, EU conformance:
Yes
Yes
No
No
Yes
No
No specific flammability prevention property
No
Not conformable
No
Habasit Product Data Sheet HAT-8P - Last modification on 07/19/2005 - 1
Technical Data
Thickness:
2.0 mm
0.08 in.
Mass of belt (belt weight):
2.1 kg/m²
0.43 lbs./sq.ft
Nosebar Radius (minimum):
-- mm
-- in.
Pulley diameter (minimum):
20 mm
0.8 in.
Pulley diameter minimum with counter
25 mm
1 in.
flection:
Tensile force for 1% elongation (k1% static)
7 N/mm
40 lbs./in.
per unit of width (Habasit standard 320.064):
Tensile force for 1% elongation (k1%
2.4 N/mm
14 lbs./in.
relaxed EN 1723) per unit of width (Habasit
standard 320.155):
Admissible tensile force per unit of width:
12 N/mm
69 lbs./in.
Operating temperature admissible
Min 0 °C
Min 32 °F
(continuous):
Max 100 °C
Max 212 °F
Coefficient of friction on slider bed of pickled
0.20 [-]
0.2 [-]
steel sheet:
Seamless manufacturing width:
2400 mm
94 in.
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are
based on the Master Joining Method.
Additional Technical Information
Chemical Resistance Class:
Installation and Handling Instructions:
Limitations:
2 (These indications are not guarantees of properties)
Do not go below initial tension (epsilon) ~0.5%.; Install the slack belt and tension
until running perfectly under the full belt load.
This product has not been tested according to ATEX standards (atmospheres with
explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to
user?s analysis in the respective environment.
Legend
*
1)
2)
3)
8)
BgVV
EEC
EU
FDA
NA
NAP
USDA
JFRL
No calculation Value
No further authoritative acceptance since elimination of prior approval procedure of September 24, 1997, from USDA
authority
Product containing different coating materials such as elastomer, natural fibers, silicones, etc., are not subject to the
directive 2002/72/EC
CLA: Coordination of the centre line-average value Ra (in the US also Arithmetical Average (AA)) to the maximum
peak to valley height Rt for surfaces manufactured by chip removal.
Due to high coefficient of friction of running/pulley side, the suitability for use on slider beds is limited
Bundesinstitut für gesundheitlichen Verbraucherschutz und Veterinärmedizin (German Federal Institute for
Consumers' Health Protection and Veterinary Medicine)
European Economic Community
European Union (Directive 2002/72/EC)
Food and Drug Administration
Not available
Not applicable
United States Department of Agriculture (Food Safety and Inspection Service, Washington D.C.)
Japan Food Research Laboratory
Product Liability, Application Considerations
If the proper selection and application of Habasit products are not recommended by an authorized Habasit sales specialist, the
selection and application of Habasit products, including the related area of product safety, are the responsibility of the customer.
All indications / information are recommendations and believed to be reliable, but no representations, guarantees, or warranties of any
kind are made as to their accuracy or suitability for particular applications. The data provided herein are based on laboratory work with
small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New
knowledge and experiences can lead to modifications and changes within a short time without prior notice.
BECAUSE CONDITIONS OF USE ARE OUTSIDE OF HABASIT?S AND ITS AFFILIATED COMPANIES CONTROL, WE CANNOT
ASSUME ANY LIABILITY CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS MENTIONED HEREIN.
THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT / MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS,
DAMAGES, CONSEQUENTIAL DAMAGES, AND FURTHER-REACHING CONSEQUENCES.
Habasit Product Data Sheet HAT-8P - Last modification on 07/19/2005 - 2