1 Door Handles Door Handles Contents Lever handles – KILIMANJARO/MONT BLANC 1 Lever handle set - KILIMANJARO Lever handle set - MONT BLANC Individual set components Pull handles – FUJI Pull handle set Grip handle set Grip handles – MATTERHORN Lever handle set Lever handle set Lever handle set Lever handles – CASSINA Lever and pull handles – FSB Pull handle set AH 1.2 New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Lever handles – HOPPE Door Handles Information Classification of lever handles in compliance with EN 1906:2002 and EN 1906:2010 Lever handles are divided into four categories of use in these standards. The requirements are classified using an eight-position designation system. The products are classified in accordance with the 2002 and 2010 keys. Deviating definitions can be identified by the issue date. 8-position classification key in accordance with EN 1906:2002 and EN 1906:2010 Position EN 1906:2002 1 2 Category of use Durability 4 Fire resistance* 3 Door weight EN 1906:2010 1 2 Category of use Durability 7 Forced entry resistance 5 Safety 4 Fire resistance* 6 Corrosion resistance 8 Version 7 Burglar protection * The proven fire resistant characteristics can be found in the relevant report Meaning of individual positions in classification key: Classification key Possible grades Meaning 1 Category of use (2002) 1–4 1 = Moderate usage frequency by persons who are inclined to take the utmost care and are unlikely to use the fittings incorrectly, e.g. interior doors in residential buildings 1 Category of use (2010) We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). 2 = Moderate usage frequency by persons who are inclined to take (2002: "the utmost") care but may possibly use the fittings incorrectly, e.g. interior doors in office buildings 3 = Frequent use by the public or other persons who are not inclined to take care and are extremely likely to use the fittings incorrectly, e.g. doors in office buildings with public access 4 = For use on doors that are frequently subjected to applied force or property damage, e.g. football stadiums, oil rigs, in military bases or public toilets 2 Durability (2002) 6–7 7 = Frequent use: 200,000 test cycles 2 Durability (2010) 3 Door weight 6 = Moderate usage frequency: 100,000 test cycles No classification New products and systems: www.hafele.com AH 1.3 1 Door Handles Information Meaning of individual positions in classification key: 1 Classification key Possible grades Meaning 4 Fire resistance* (2002) 0–1 0 = Not permitted for use on fire resistant and smoke control doors 1 = Suitable for use on fire resistant and smoke control doors 4 Fire resistance* (2010) 0, A–C 0 = No classification A = Suitable for use on smoke control doors B = Suitable for use on fire resistant and smoke control doors C = Suitable for use on fire resistant and smoke control doors with lever handle core requirements 5 Safety 0–1 0 = For normal purposes 1 = In the event of safety applications 6 Corrosion resistance 0–5 0 = No defined corrosion resistance (2002), no classification (2010) 1 = Low corrosion resistance 2 = Average corrosion resistance (2002), moderate corrosion resistance (2010) 3 = High corrosion resistance 4 = Extremely high corrosion resistance 5 = extraordinarily high corrosion resistance (2002), extremely high corrosion resistance (2010) 7 Forced entry resistance 0–4 0 = Fittings that are not suitable for use on burglar-proof doors (2002), no classification (2010) 1 = Low forced entry resistance 2 = Moderate forced entry resistance 3 = High forced entry resistance 4 = Extremely high forced entry resistance 8 Version A, B or U Type A = Spring-assisted fittings Type B = Fittings with sets with spring tension (2002), spring-assisted fittings (2010) Type U = Fittings without sets with spring unsprung fittings (2010) * The proven fire resistant characteristics can be found in the relevant report AH 1.4 New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). 7 Burglar protection Door Handles Information Door direction – left or right The door direction (left/right) according to DIN 107 is determined When selecting alternate sets with asymmetrical handles a distriction as follows: to the right/left is required. It is therefore necessary to observe the • Visible position of the door hinges on the left: (DIN) left particular door direction. • Visible position of the door hinges on the right: (DIN) right Examples of asymmetrical lever handles Hinges visible on the right hand side Hinges visible on the left hand side DIN left hand DIN right hand Examples of symmetrical lever handles Lever handle direction Lever handle aperture part pointing to the left Lever handle aperture part pointing to the right Version “left hand” Version “left hand” We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Opening direction DIN right = right outwards DIN left = left outwards DIN right = right inwards DIN left = left inwards New products and systems: www.hafele.com AH 1.5 1 Door Handles Information Product line StarTec 1 The StarTec door handles are for the first time divided into four clearly separated product lines. The purpose behind this is to enable you, our partners to get the better overview of our product range and to make it easier for you to find the right handles for your needs. KILIMANJARO MONT BLANC We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). FUJI MATTERHORN AH 1.6 New products and systems: www.hafele.com Door Handles Information The KILIMANJARO Lever handles series StarTec 1 How to recognise original StarTec KILIMANJARO door handle sets? 1 The Häfele logo is visible on the lever handle 2 The spindle is marked with Häfele logo and EN1906 logo 3 The spindle comes with an offset hollow core for screw fixing 4 The lever handle single spring loaded mechanism ensures a straight lever handle position 5 The lever handle is fixed to a steel rosette 1 2 6 The bolt through screw fixing for maximum hold on handle Additional features: • Made of stainless steel We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). • For door thicknesses of 35–50 mm 3 4 5 6 Certificate of product range KILIMANJARO New products and systems: www.hafele.com AH 1.7 Door Handles Lever Handles Lever handle sets 1 Material/finish Cat. No. Material/finish Cat. No. Stainless steel matt 903.92.556 Stainless steel matt 903.92.576 Stainless steel polished 903.92.557 Stainless steel polished 903.92.577 Packing: 1 set Cat. No. Material/finish Cat. No. Stainless steel matt 903.92.566 Stainless steel matt 903.92.586 Stainless steel polished 903.92.567 Stainless steel polished 903.92.587 1.8 Packing: 1 set New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Material/finish Packing: 1 set AH Packing: 1 set Door Handles Lever Handles Lever handle sets 1 Material/finish Cat. No. Material/finish Cat. No. Stainless steel matt 903.92.596 Stainless steel matt 903.92.616 Stainless steel polished 903.92.597 Stainless steel polished 903.92.617 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 set Packing: 1 set Material/finish Cat. No. Material/finish Cat. No. Stainless steel matt 903.92.606 Stainless steel matt 903.92.626 Stainless steel polished 903.92.607 Stainless steel polished 903.92.627 Packing: 1 set Packing: 1 set New products and systems: www.hafele.com AH 1.9 Door Handles Lever Handles Lever handle sets 1 Material/finish Cat. No. Material/finish Cat. No. Stainless steel matt 903.92.636 Stainless steel matt 903.92.656 Stainless steel polished 903.92.637 Stainless steel polished 903.92.657 Packing: 1 set Cat. No. Material/finish Cat. No. Stainless steel matt 903.92.646 Stainless steel matt 903.92.666 Stainless steel polished 903.92.647 Stainless steel polished 903.92.667 1.10 Packing: 1 set New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Material/finish Packing: 1 set AH Packing: 1 set Door Handles Lever Handles Lever handle sets 1 Material/finish Cat. No. Material/finish Cat. No. Stainless steel matt 903.92.676 Stainless steel matt 903.92.696 Stainless steel polished 903.92.677 Stainless steel polished 903.92.697 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 set Packing: 1 set Material/finish Cat. No. Material/finish Cat. No. Stainless steel matt 903.92.686 Stainless steel matt 903.70.124 Stainless steel polished 903.92.687 Stainless steel polished 903.70.125 Packing: 1 set Packing: 1 set New products and systems: www.hafele.com AH 1.11 Door Handles Lever Handles Fixed knob 1 Material/finish Cat. No. Stainless steel matt 903.70.126 Stainless steel polished 903.70.127 Packing: 1 pc. Accessories for door handle set StarTec Hexagon socket screw M6 Diameter mm Cat. No. 6 909.46.090 Packing: 1 pc. Mounting screw M6 Size mm Cat. No. M4 x 65 909.19.902 Spindle 8 mm on plate For rose set Version Cat. No. For rose set 909.46.060 For backplate set 909.46.061 For backplate set Packing: 1 set Spindle arresting plate Dimension mm Cat. No. 27 x 27 909.00.946 Packing: 1 pc. AH 1.12 New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 pc. Door Handles Lever Handles Accessories for door handle set StarTec 1 Spindle, square Length L mm Cat. No. 96 100 105 110 130 909.46.025 909.46.028 909.46.030 909.46.031 909.46.035 Length L mm Cat. No. 80 89 99 125 909.46.040 909.46.041 909.46.042 909.46.043 Length L mm Cat. No. 100 118 909.00.270 909.83.711 Alternate spindle M12, 8 mm We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Spindle 8 mm, split in center Alternate spindle 8 mm Length X mm Length mm Cat. No. 11.5–16.5 17.0–22.0 22.5–27.5 60 71 82 909.46.106 909.46.107 909.46.108 Adapter sleeve Size mm Cat. No. 7–8 8–9 9–10 909.40.500 909.40.501 909.40.502 New products and systems: www.hafele.com AH 1.13 Door Handles Lever Handles The Mont Blanc Lever handles series StarTec 1 How to recognise original StarTec Mont Blanc door handle sets? 1 The Häfele logo is visible on the lever handle 2 Extra long handle length with 140 mm 3 The spindle comes with an offset hollow core for screw fixing 4 The lever handle single spring loaded mechanism ensures a straight lever handle position 5 Rose is separated from the handle to achieve a one piece rose 1 2 cover 6 The bolt through screw fixing for maximum hold on handle Additional features • Made of stainless steel (304) • For door thicknesses of 35–50 mm 3 4 5 6 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). 7 MONT BLANC AH 1.14 New products and systems: www.hafele.com Door Handles Lever Handles Lever handle sets 1 Material/finish Cat. No. Material/finish Cat. No. Stainless steel matt (304) 903.98.636 Stainless steel matt (304) 903.98.638 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 set Packing: 1 set Material/finish Cat. No. Stainless steel matt (304) 903.98.637 Packing: 1 set New products and systems: www.hafele.com AH 1.15 Door Handles Lever Handles Lever handle sets 1 Material/finish Cat. No. Material/finish Cat. No. Stainless steel matt (304) 903.98.640 Stainless steel matt (304) 903.98.642 Packing: 1 set Cat. No. Material/finish Cat. No. Stainless steel matt (304) 903.98.641 Stainless steel matt (304) 903.98.643 1.16 Packing: 1 set New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Material/finish Packing: 1 set AH Packing: 1 set Door Handles Lever Handles Lever handle sets 1 Material/finish Cat. No. Material/finish Cat. No. Stainless steel matt (304) 903.98.644 Stainless steel matt (304) 903.98.646 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 set Packing: 1 set Material/finish Cat. No. Stainless steel matt (304) 903.98.645 Packing: 1 set New products and systems: www.hafele.com AH 1.17 Door Handles Lever Handles Individual set components 1 Lever handle Material/finish Cat. No. Stainless steel matt (304) 902.20.910 Packing: 1 pair incl. spindle Material/finish Cat. No. Stainless steel matt/polished (304) 902.20.914 Packing: 1 pair incl. spindle Material/finish Cat. No. Stainless steel matt (304) 902.20.916 Material/finish Cat. No. Stainless steel matt (304) 902.20.922 Packing: 1 pair incl. spindle Material/finish Cat. No. Stainless steel matt (304) 902.20.924 Packing: 1 pair incl. spindle Material/finish Cat. No. Stainless steel matt (304) 902.20.926 Packing: 1 pair incl. spindle AH 1.18 New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 pair incl. spindle Door Handles Lever Handles Individual set components 1 Lever handle Material/finish Cat. No. Stainless steel matt (304) 902.20.928 Packing: 1 pair incl. spindle Material/finish Cat. No. Stainless steel matt (304) 902.20.930 Packing: 1 pair incl. spindle Material/finish Cat. No. Stainless steel matt (304) 902.20.932 Packing: 1 pair incl. spindle Material/finish Cat. No. Stainless steel matt (304) 902.20.934 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 pair incl. spindle Rose and escutcheon Material/finish Cat. No. Stainless steel matt (304) 902.50.196 Packing: 1 pair Material/finish Cat. No. Stainless steel matt (304) 902.52.196 Packing: 1 pair New products and systems: www.hafele.com AH 1.19 Door Handles Lever Handles Individual set components 1 Rose and escutcheon Material/finish Cat. No. Stainless steel matt (304) 902.55.196 Packing: 1 pair Material/finish Cat. No. Stainless steel matt (304) 902.53.204 Packing: 1 pc Material/finish Cat. No. Stainless steel matt (304) 902.50.194 Packing: 1 pair Material/finish Cat. No. Stainless steel matt (304) 902.52.194 Material/finish Cat. No. Stainless steel matt (304) 902.55.194 Packing: 1 pair Material/finish Cat. No. Stainless steel matt (304) 902.53.206 Packing: 1 pc Material/finish Cat. No. Stainless steel matt (304) 902.50.202 Packing: 1 pair AH 1.20 New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 pair Door Handles Lever Handles Individual set components 1 Rose and escutcheon Material/finish Cat. No. Stainless steel matt (304) 902.52.202 Packing: 1 pair Material/finish Cat. No. Stainless steel matt (304) 902.55.202 Packing: 1 pair Material/finish Cat. No. Stainless steel matt (304) 902.53.208 Packing: 1 pc We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Long backplate Material/finish Cat. No. Stainless steel matt (304) 902.66.012 Packing: 1 pair Material/finish Cat. No. Stainless steel matt (304) 903.60.440 Packing: 1 pair New products and systems: www.hafele.com AH 1.21 Door Handles Lever Handles Individual set components 1 Long backplate Material/finish Cat. No. Stainless steel matt (304) 902.66.014 Packing: 1 pair Material/finish Cat. No. Stainless steel matt (304) 903.60.442 Packing: 1 pair Material/finish Cat. No. Stainless steel matt (304) 902.66.016 Material/finish Cat. No. Stainless steel matt (304) 903.60.444 Packing: 1 pair Material/finish Cat. No. Stainless steel matt (304) 902.66.018 Packing: 1 pair Material/finish Cat. No. Stainless steel matt (304) 903.60.446 Packing: 1 pair AH 1.22 New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 pair Door Handles Lever Handles Accessories for lever handle set 1 Spindle, square Length L mm Cat. No. 100 110 120 909.00.854 909.00.855 909.00.856 For door thickness mm Screw length mm Cat. No. 35–40 909.00.857 Mounting screw 45 Hexagon socket screw M6 Diameter mm Cat. No. 6 909.46.090 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 pc. New products and systems: www.hafele.com AH 1.23 Door Handles Pull Handles The FUJI Pull handle series StarTec 1 How to recognise original StarTec FUJI door handle sets 1 The Häfele logo is visible on the pull handles 2 Bolt through screw fixing for long period of time 3 Modern design 1 2 Additional features: • Made of stainless steel 2 3 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). 3 FUJI AH 1.24 New products and systems: www.hafele.com Door Handles Pull Handles Pull handle sets 1 Features • For glass, aluminium or timber door with back to back fixings Features • Screw M8 • For glass, aluminium or timber door with back to back fixings • For door thickness: 8–50 mm • Screw M8 • Glass cut out for fix bolt Ø14 mm • For door thickness: 8–50 mm Supplied with • Glass cut out for fix bolt Ø14 mm 1 Set pull handles Supplied with 1 Set screws for glass door 1 Set pull handles 1 Set screws for wooden door 1 Set screws for glass door Material/finish Dim. A mm Dim. B mm Cat. No. Stainless steel matt 330 300 903.07.910 1 Set screws for wooden door Material/finish Dim. A mm Dim. B mm Cat. No. Stainless steel matt 330 300 903.07.900 Packing: 1 pair incl. fixing material We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 pair incl. fixing material New products and systems: www.hafele.com AH 1.25 Door Handles Pull Handles Pull handle sets 1 Features • For glass, aluminium or timber door with back to back fixings • Screw M8 Features • For door thickness: 8–50 mm • For glass, aluminium or timber door with back to back fixings • Glass cut out for fix bolt Ø14 mm • Screw M8 Supplied with • For door thickness: 8–50 mm 1 Set pull handles • Glass cut out for fix bolt Ø14 mm 1 Set screws for glass door Supplied with 1 Set screws for wooden door 1 Set pull handles Material/finish Dim. A mm Dim. B mm Cat. No. Stainless steel matt 330 300 903.07.920 1 Set screws for glass door 1 Set screws for wooden door Material/finish Ø mm Dim. A mm Dim. B mm Cat. No. Stainless steel matt 25 200 300 400 200 300 400 1,000 1,400 1,800 903.06.018 903.06.020 903.06.028 903.05.790 903.05.791 903.05.792 903.05.793 903.05.794 903.05.795 32 300 450 600 300 450 600 1,200 1,600 2,000 Packing: 1 pair incl. fixing material AH 1.26 New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 pair incl. fixing material Door Handles Pull Handles Pull handle sets 1 Features • For glass, aluminium or timber door with back to back fixings Features • Screw M8 • For glass, aluminium or timber door with back to back fixings • Screw M8 • For door thickness: 8–50 mm • Glass cut out for fix bolt Ø13 mm • For door thickness: 8–50 mm Supplied with • Glass cut out for fix bolt Ø14 mm 1 Set pull handles Supplied with 1 Set screws for glass door 1 Set pull handles 1 Set screws for wooden door 1 Set screws for glass door We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). 1 Set screws for wooden door Material/finish Dim. A mm Dim. B mm Cat. No. 635 600 903.00.696 Material/finish Ø mm Dim. A mm Dim. B mm Cat. No. Stainless steel matt Stainless steel matt 25 200 300 400 200 300 400 1,000 1,400 1,800 903.03.650 903.03.652 903.03.654 903.05.890 903.05.891 903.05.892 903.05.893 903.05.894 903.05.895 Packing: 1 pair incl. fixing material 32 300 450 600 300 450 600 1,200 1,600 2,000 Packing: 1 pair incl. fixing material New products and systems: www.hafele.com AH 1.27 Door Handles Pull Handles Pull handle sets 1 B Features Features • For glass, aluminium or timber door with back to back fixings • For glass, aluminium or timber door with back to back fixings • Screw M8 • Screw M8 • For door thickness: 8–50 mm • For door thickness: 8–50 mm • Glass cut out for fix bolt Ø13 mm • Glass cut out for fix bolt Ø14 mm Supplied with Supplied with 1 Set pull handles 1 Set pull handles 1 Set screws for glass door 1 Set screws for glass door 1 Set screws for wooden door Dim. A mm Dim. B mm Cat. No. Material/finish Dim. A mm Dim. B mm Cat. No. Stainless steel matt 525 500 903.00.685 Stainless steel matt 480 630 1,030 450 600 1,000 903.00.070 903.00.074 903.00.078 Packing: 1 pair incl. fixing material Packing: 1 pair incl. fixing material AH 1.28 New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). 1 Set screws for wooden door Material/finish Door Handles Pull Handles Pull handle sets 1 Features • For glass, aluminium or timber door with back to back fixings • Screw M8 Features • For door thickness: 8–50 mm • For glass, aluminium or timber door with back to back fixings • Glass cut out for fix bolt Ø14 mm • Screw M8 x 70 mm Supplied with • For door thickness: 8–50 mm 1 Set pull handles • Glass cut out for fix bolt Ø14 mm 1 Set screws for glass door Supplied with 1 Set screws for wooden door 1 Set pull handles Material/finish Dim. A mm Dim. B mm Cat. No. Stainless steel matt 480 630 1,030 450 600 1,000 903.00.170 903.00.174 903.00.178 1 Set screws for glass door 1 Set screws for wooden door Packing: 1 pair incl. fixing material Material/finish Dim. A mm Dim. B mm Cat. No. Stainless steel matt 480 450 903.99.358 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 pair incl. fixing material New products and systems: www.hafele.com AH 1.29 Door Handles Pull Handles Pull handle sets 1 Features • For glass, aluminium or timber door with back to back fixings Features • Screw M8 • For glass, aluminium or timber door with back to back fixings • For door thickness: 8–50 mm • Screw M8 • Glass cut out for fix bolt Ø14 mm • For door thickness: 8–50 mm Supplied with • Glass cut out for fix bolt Ø14 mm 1 Set pull handles Supplied with 1 Set screws for glass door 1 Set pull handles 1 Set screws for wooden door 1 Set screws for glass door Dim. A mm Dim. B mm Cat. No. Stainless steel satin 450 600 1,000 1,200 300 400 800 1,000 903.00.942 903.00.944 903.00.946 903.00.948 1 Set screws for wooden door Material/finish Dim. A mm Dim. B mm Cat. No. Stainless steel satin 482 632 450 600 903.00.912 903.00.914 ¥­³¬¬¶n´ Packing: 1 pair incl. fixing material Packing: 1 pair incl. fixing material AH 1.30 New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Material/finish Door Handles Pull Handles Pull handle sets 1 Features • For glass, aluminium or timber door with back to back fixings • Screw M8 Features • For door thickness: 8–50 mm • For glass, aluminium or timber door with back to back fixings • Glass cut out for fix bolt Ø13 mm • Screw M8 Supplied with • For door thickness: 8–50 mm 1 Set pull handles • Glass cut out for fix bolt Ø14 mm 1 Set screws for glass door Supplied with 1 Set screws for wooden door 1 Set pull handles Material/finish Dim. A mm Dim. B mm Cat. No. 1 Set screws for glass door 1 Set screws for wooden door Stainless steel matt 475 625 450 600 903.00.972 903.00.974 Packing: 1 pair incl. fixing material Material/finish Dim. A mm Dim. B mm Cat. No. Stainless steel matt 325 625 300 600 903.00.870 903.00.874 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 pair incl. fixing material New products and systems: www.hafele.com AH 1.31 Door Handles Pull Handles Pull handle sets 1 Features • For glass, aluminium or timber door with back to back fixings Features • Screw M8 • For glass, aluminium or timber door with back to back fixings • For door thickness: 8–50 mm • Screw M8 • Glass cut out for fix bolt Ø14 mm • For door thickness: 8–50 mm Supplied with • Glass cut out for fix bolt Ø14 mm 1 Set pull handles Supplied with 1 Set screws for glass door 1 Set pull handles 1 Set screws for wooden door 1 Set screws for glass door Dim. A mm Dim. B mm Cat. No. Stainless steel matt 425 625 400 600 903.00.882 903.00.884 Packing: 1 pair incl. fixing material 1 Set screws for wooden door Material/finish Dim. A mm Dim. B mm Cat. No. Stainless steel matt 475 625 450 600 903.05.762 903.05.764 Packing: 1 pair incl. fixing material AH 1.32 New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Material/finish Door Handles Pull Handles Pull handle sets 1 Features Features • For glass, aluminium or timber door with back to back fixings • For glass, aluminium or timber door with back to back fixings • Screw M8 • Screw M8 • For door thickness: 8–50 mm • For door thickness: 8–50 mm • Glass cut out for fix bolt Ø14 mm • Glass cut out for fix bolt Ø13 mm Supplied with Supplied with 1 Set pull handles 1 Set pull handles 1 Set screws for glass door 1 Set screws for glass door 1 Set screws for wooden door 1 Set screws for wooden door Material/finish Dim. A mm Dim. B m Cat. No. Material/finish Dim. A mm Dim. B mm Cat. No. Stainless steel matt 482 632 450 600 903.05.752 903.05.754 Stainless steel matt 482 632 450 600 903.05.800 903.05.810 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 pair incl. fixing material Packing: 1 pair incl. fixing material New products and systems: www.hafele.com AH 1.33 Door Handles Pull Handles Pull handle sets 1 Features • For glass, aluminium or timber door with back to back fixings • Screw M8 • For door thickness: 8–50 mm Features • Glass cut out for fix bolt Ø14 mm • For glass, aluminium or timber door with back to back fixings Supplied with • Screw M8 1 Set pull handles • For door thickness: 8–50 mm 1 Set screws for glass door • Glass cut out for fix bolt Ø14 mm 1 Set screws for wooden door Supplied with Material/finish Dim. A mm Dim. B mm Cat. No. Stainless steel matt 300 225 903.00.080 1 Set pull handles 1 Set screws for glass door 1 Set screws for wooden door Dim. A mm Dim. B mm Cat. No. Stainless steel matt 600 450 903.00.090 Packing: 1 pair incl. fixing material We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Material/finish Packing: 1 pair incl. fixing material AH 1.34 New products and systems: www.hafele.com Door Handles Pull Handles Pull handle sets 1 Features • For glass, aluminium or timber door with back to back fixings • Screw M8 • For door thickness: 8–50 mm Features • Glass cut out for fix bolt Ø14 mm • For glass, aluminium or timber door with back to back fixings Supplied with • Screw M8 1 Set pull handles • For door thickness: 8–50 mm 1 Set screws for glass door • Glass cut out for fix bolt Ø14 mm 1 Set screws for wooden door Supplied with Material/finish Dim. A mm Dim. B mm Cat. No. Stainless steel matt 332 482 632 300 450 600 903.05.850 903.05.860 903.05.870 1 Set pull handles 1 Set screws for glass door 1 Set screws for wooden door Material/finish Dim. A mm Dim. B mm Cat. No. Stainless steel matt 600 750 1150 450 600 1000 903.00.932 903.00.934 903.00.937 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 pair incl. fixing material Packing: 1 pair incl. fixing material New products and systems: www.hafele.com AH 1.35 Door Handles Pull Handles Pull handle sets 1 Features • For glass, aluminium or timber door with back to back fixings • Screw M8 Features • For glass, aluminium or timber door with back to back fixings • Screw M8 • For door thickness: 8–50 mm Supplied with 1 Set pull handles • For door thickness: 8–50 mm 1 Set screws for glass door • Glass cut out for fix bolt Ø14 mm 1 Set screws for wooden door Supplied with 1 Set pull handles Material/finish Dim. A mm Dim. B mm Cat. No. Stainless steel matt 550 400 903.00.100 1 Set screws for glass door Material/finish Dim. A mm Dim. B mm Cat. No. Stainless steel matt 475 625 1,025 450 600 1,000 903.03.640 903.03.642 903.03.644 Packing: 1 pair incl. fixing material We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). 1 Set screws for wooden door Packing: 1 pair incl. fixing material AH 1.36 New products and systems: www.hafele.com Door Handles Pull Handles Pull handle sets 1 Features Features • For glass, aluminium or timber door with back to back fixings • For glass, aluminium or timber door with back to back fixings • Screw M6 • Screw M8 x 70 mm • For door thickness: 8–50 mm • For door thickness: 8–50 mm Supplied with Supplied with 1 Set pull handles 1 Set pull handles 1 Set screws for glass door 1 Set screws for glass door 1 Set screws for wooden door 1 Set screws for wooden door Material/finish Dim. A mm Dim. B mm Cat. No. Material/finish Dim. A mm Dim. B mm Cat. No. Stainless steel matt 625 450 903.00.160 Stainless steel matt 600 370 903.99.323 Packing: 1 pair incl. fixing material We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 pair incl. fixing material New products and systems: www.hafele.com AH 1.37 Door Handles Pull Handles Pull handle sets Single side fixing bolt for pull handle 1 Material/finish Screw M8 Screw M6 Stainless steel matt 909.00.926 909.00.927 Stainless steel polished 909.00.942 – Packing: 1 pc. (Pull handle use 2 pcs.) Features • For glass, aluminium or timber door with back to back fixings • Screw M8 x 70 mm • For door thickness: 8–50 mm Supplied with 1 Set pull handles 1 Set screws for glass door Material/finish Dim. A mm Dim. B mm Cat. No. Stainless steel matt 450 300 903.99.340 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). 1 Set screws for wooden door Packing: 1 pair incl. fixing material AH 1.38 New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Door Handles Pull Handles 1 New products and systems: www.hafele.com AH 1.39 Door Handles Grip Handles The MATTERHORN Grip handle series StarTec 1 How to recognise original StarTec MATTERHORN door handle sets 1 The Häfele logo is visible on the cylinder 2 Big oval knob from inside 3 Following american hardware specifications 4 Modern design Additional features: • Made of stainless steel (304) • For door thicknesses of 38–60 mm • Backset: 60 mm 1 2 3 4 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). MATTERHORN AH 1.40 New products and systems: www.hafele.com Door Handles Grip Handles Grip handle set 1 Features • For flush timber doors • Suitable for DIN left and DIN right hand Technical data • For door thickness: 38–60 Supplied with 1 Pair of grip handles 1 Set of fixing material Material/finish Entrance & Dummy Stainless steel matt 911.78.314 Stainless steel polished 911.78.315 Packing: 1 set We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Features • For flush timber doors • Suitable for DIN left and DIN right hand Technical data • For door thickness 38–60 Supplied with 1 Pair of grip handles 1 Set of fixing material Material/finish Entrance & Dummy Stainless steel matt 911.78.316 Stainless steel polished 911.78.317 Packing: 1 set Order reference Cylinder and mortise lock ........................................ page 1.43 New products and systems: www.hafele.com AH 1.41 Door Handles Grip Handles Grip handle set 1 Features • For flush timber doors • Suitable for DIN left and DIN right hand Technical data • For door thicknesses: 38–60 Supplied with 1 Pair of grip handles 1 Set of fixing material Material/finish Entrance & Dummy Stainless steel matt 911.78.320 Stainless steel polished 911.78.321 Packing: 1 set Features • For flush timber doors Technical data • For door thickness 38–60 Supplied with 1 Pair of grip handles 1 Set of fixing material Material/finish Entrance & Dummy Stainless steel matt 911.78.318 Stainless steel polished 911.78.319 Packing: 1 set Order reference Cylinder and mortise lock ........................................ page 1.43 AH 1.42 New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). • Suitable for DIN left and DIN right hand Door Handles Grip Handles Grip handle set Accessories Mortise lock for grip handle, backset 60 mm Material/finish Cat. No. Stainless steel matt 911.02.140 Stainless steel polished 911.02.141 Packing: 1 pc. Cylinder Supplied with 1 Round key Features 5 Owner key • For flush timber doors 1 Construction key • Suitable for DIN left and DIN right hand Technical data • For door thicknesses: 38–60 Supplied with We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). 1 Pair of grip handles 1 Set of fixing material Material/finish Stainless steel matt Stainless steel polished Material/finish Cat. No. Stainless steel matt 916.86.902 Stainless steel polished 916.86.903 Entrance & Dummy 911.78.322 911.78.323 Packing: 1 set Blind rose for dummy function version Order reference Blind rose Cat. No. Stainless steel matt 916.86.904 Stainless steel polished 916.86.905 Cylinder and mortise lock ........................................ page 1.43 New products and systems: www.hafele.com AH 1.43 1 Door Handles Lever Handles - HOPPE Resista® - HOPPE's surface guarantee 1 HOPPE Resista® hardware has a 10-year surface guarantee (PVD coating). They are therefore ideal for costal areas and highly frequented area such as public buildings, shop and hotels. Care Dirt can be easily removed with a damp cloth. The use of caustic cleansers or chemicals should SecuSan - HOPPE’s antimicrobial surface coating SecuSan is highly effective due to the fast action of its antimicrobial properties. Hardware with this surface is thus especially suitable for use in medical and nursing facilities, e.g. in hospitals, medical centres, pharmacies, care homes, nurseries, schools, institutes or public buildings. Wherever hygiene protection needs to act fast while remaining highly cost-effective and environmentally considerate. It's high level of hygienic safety has been confirmed independent laboratory and practical tests. For more information please check with our sales representative. AH 1.44 New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). be avoided. No further special care is needed. Door Handles Lever Handles - HOPPE HOPPE Quick-Fit connection 1 Quick-fit - Hoppe's spindle fixing method With normal door handle installation, lots of steps have to be taken, quite often not without awkward fumbling. This is tedious and takes time. What is infinitely better is the HOPPE quick-fit connection. With its advanced technology, door handles can be installed in one simple step - and to last! The key point of the new technology is the blocking mechanism, developed by HOPPE, in the receiver handle. This holds the solid spindle of the other handle firmly and without play. It's with the whole width of the spindle that maximum torque transmission is achieved. The HOPPE quick-fit connection is a variable axial handle fitting, tested according to DIN EN 1906 and can be used for various door We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). thicknesses (in a defined area). The advantages of the HOPPE quick-fit connection at a glance: • Very quick door handle fitting: around 75% time saving compared with normal fitting • No Allen screw or transverse spindles needed - No hole for Allen screw needed - No alignment of the spindle necessary when tightening the Allen screw - No loosening of the Allen screw or spindle possible • Integrated blocking mechanism in the receiver handle - No tools needed for installation - Play-free handle connection - Long-lasting, firm fitting of the door handles • Use of a solid spindle - Solid spindle for maximum torque transmission • Variable axial handle fitting tested to DIN EN 1906 - can be used for various door-thicknesses (in a defined area) • Easy and quick removal of door handles - eg, with the Allen key included or a screwdriver New products and systems: www.hafele.com AH 1.45 Door Handles Lever Handles - HOPPE Quick-Fit plus HOPPE’s rose fixing method 1 HOPPE Quick-Fitplus is the logical further development of the innovative HOPPE Quick-Fit connection.It is not just the door handles which can be fitted easily without screws and almost no tools, but rose and escutcheon, too. The new quick-fit sets are striking with their almost flat, flush rose design. Modern and appealing design The new quick fitplus sets go very well with the current trends in design. The stainless steel roses, which are only 2mm thick, come in round or square shapes virtually flush with the door. Easy and quick fitting The handle roses with through-going supporting lugs and door handles are simply fitted together, with the whole set able to be installed without the need for screws. The through-going supporting lugs of the handle roses consist of a nylon pin and sleeve each. By plugging one into the other a play-free and We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). firm fixing is produced. AH 1.46 New products and systems: www.hafele.com Door Handles Lever Handles - HOPPE Lever handle sets 1 Material/finish Cat. No. Material/finish Cat. No. Aluminium silver coloured 904.92.020 Aluminium silver coloured 905.82.039 Aluminium stainless steel coloured 904.92.040 Aluminium stainless steel coloured 905.82.040 Material/finish Cat. No. Material/finish Cat. No. Aluminium silver coloured 904.92.056 Aluminium silver coloured 905.82.071 Aluminium stainless steel coloured 904.92.057 Aluminium stainless steel coloured 905.82.070 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 set Packing: 1 set Packing: 1 set New products and systems: www.hafele.com AH 1.47 Door Handles Lever Handles - HOPPE Lever handle sets 1 Material/finish Cat. No. Material/finish Cat. No. Brass polished satin PVD 900.92.154 Brass chrome plated polished/matt 900.92.157 Packing: 1 set Cat. No. Material/finish Cat. No. Brass chrome plated polished satin 900.82.071 Brass chrome plated polished satin 900.82.290 1.48 Packing: 1 set New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Material/finish Packing: 1 set AH Packing: 1 set Door Handles Lever Handles - HOPPE Lever handle sets 1 Material/finish Cat. No. Material/finish Cat. No. Brass polished 900.92.196 Brass polished 900.92.190 Brass chrome plated polished satin 900.92.197 Brass chrome plated polished satin 900.92.191 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 set Packing: 1 set Material/finish Cat. No. Material/finish Cat. No. Brass polished 900.92.885 Brass polished 901.82.250 Brass chrome plated polished satin 900.92.424 Brass chrome plated polished satin 901.81.254 Packing: 1 set Packing: 1 set New products and systems: www.hafele.com AH 1.49 Door Handles Lever Handles - HOPPE Lever handle sets 1 Material/finish Cat. No. Material/finish Cat. No. Brass chrome plated polished/matt 901.82.174 Stainless steel matt 902.92.876 Material/finish Cat. No. Material/finish Cat. No. Stainless steel matt 902.92.874 Stainless steel matt 902.92.878 Packing: 1 set AH 1.50 Packing: 1 set New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 set Packing: 1 set We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Door Handles Lever Handles - HOPPE 1 New products and systems: www.hafele.com AH 1.51 Door Handles Lever Handles - CASSINA ENRICO CASSINA - Classic lever handles 1 The Enirico Cassina collection is probably the most complete from the point of view or the classic rigour and was able to grow richer year after year thanks to the continual work of research and selection. The catalogue offers a selection based on the recovery of the different stylistic standards the below are detail of each style. MANNERISM There are several different forms and shapes, ex: faces, fruits, ribbons... the overall appearance is rich, full of details and meaning. Exaggerated faces, monster like The rectangular form of the plate The handgrip has a curvy, faces were very typical of is softened by roundish elements spiral form and elements mannerism. and tiny details. that resemble leaves or fruits. ITALIAN BAROQUE A style combines spectacle, illusion and grandness in an attempt to arouse emotion and wonder. Widespread use of elliptical and spiral shapes, vibrant and fluent stylistic design. The composition still bears a symmetrical and balanced effect. Shells appear frequently in the mythologica Gods of The handle has a curviliner movement and the sea. design that evolves along the handgrip. LOUISXV The peak of Rococo style, exhibiting creativity and an ornamental exuberance that amplifies and remodels baroque tradition. The lines are often asymmetric and convoluted, depicting fanciful plants in the forms of fans, swirls and rosettes. To intensify and highlight The designs are often the decorations, cuts are made asymmetric, which enhances in the base of the plate. the rhythm of the entire piece. The handgrip resembles a winding broccade spiral from which tiny, light leaflets emerge AH 1.52 New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). decorations as they recall Door Handles Lever Handles - CASSINA ENRICO CASSINA - Classic lever handles 1 FIRST EMPIRE A cultured, majestic and celebratory style deeply inspired by Napoleon I. The ancient forms serve to glorify an ideal from a romantic perspective. Symbols of glory and prosperity abound, such as a laurel and palm leaves. Palm leaves are a symbol of prosperity The end motif elegantly and and peace, the laurel branch is an A small detail that recalls the abacus majestically evokes a diadem. emblem of power and glory. (end section) of a capital. SECOND EMPIRE A decoration that is strongly influenced by the language of the First Empire style. However, luxury is more pronounced tending toward a miscellaneous pastiche of forms. A restrained linearity of form is allied to decorative elements such as rosettes, swirls and plants. A restrained linearity controls and Decorations are significant and highlights the decorative elements. defined against the background The details are similar to the luxurious style while maintaining their balance of Luis XVI but more minimal. and measure. We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). ART DECO The Floral style sinuosity remains but the natural motifs are replaced by a cubism-inspired geometry. Decoration are less apparent. The key features included symmetrical order, interlocking and shifted concentric circles, rhomboids and zigzag patterns. Upper motif on the fountain and Geometrical forms with bevelled the slanting element with edges and grooves bring to mind spherical ends, such as the architecture of a skyscraper. ambedded gemstones. The shape of the handle mirrors its functional use. The sinusoidal helix is highly typical. VICTRORIAN A variety of different artistic languages are categorized under the Victorian style, which is divided into three phases: the first inspired by nature, the second a Neo-Renaissance style rich in inlaid figures and the third eclectic with a strong influence from oriental elements. Upper and lower part of the plate have a vaguely gothic flavour Even the contours of the handle recall The decorative motifs are stylized the architectural shape of the plate; and sinuous, highly influenced is almost geometrical. by oriental calligraphy. New products and systems: www.hafele.com AH 1.53 Door Handles Lever Handles - CASSINA Lever handle sets - FIRST EMPIRE Lever handle sets - SECOND EMPIRE 1 Material/finish Entrance Dummy Material/finish Entrance Dummy Brass polished PVD 901.98.931 901.98.933 Brass polished PVD 901.98.939 901.98.941 Brass antique coloured 901.98.932 901.98.934 Brass antique coloured 901.98.940 901.98.642 Packing: 1 set Cat. No. Material/finish Cat. No. Brass polished PVD 901.98.935 Brass polished PVD 901.98.746 Brass antique coloured 901.98.936 Brass antique coloured 901.98.748 1.54 Packing: 1 set New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Material/finish Packing: 1 set AH Packing: 1 set Door Handles Lever Handles - CASSINA Lever handle sets - LOUISXV Lever handle sets - MANNERISM 1 Material/finish Entrance Dummy Material/finish Entrance Dummy Brass polished PVD 901.98.919 901.98.921 Brass polished PVD 901.98.908 901.98.910 Brass antique coloured 901.98.920 901.98.922 Brass antique coloured 901.98.909 901.98.911 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 set Packing: 1 set Material/finish Cat. No. Material/finish Cat. No. Brass polished PVD 901.98.923 Brass polished PVD 901.98.943 Brass antique coloured 901.98.924 Brass antique coloured 901.98.944 Packing: 1 set Packing: 1 set New products and systems: www.hafele.com AH 1.55 Door Handles Lever Handles - CASSINA Lever handle sets - ART DECOR Lever handle sets - VICTORIAN Material/finish Entrance Dummy Material/finish Entrance Dummy Brass polished PVD 901.98.951 901.98.953 Brass polished PVD 901.98.945 901.98.947 Brass chrome plated polished 901.98.952 901.98.954 Brass chrome plated polished 901.98.946 901.98.948 1 Material/finish Cat. No. Material/finish Cat. No. Brass polished PVD 901.98.655 Brass polished PVD 901.98.949 Brass chrome plated polished 901.98.956 Brass chrome plated polished 901.98.950 Packing: 1 set AH Packing: 1 set 1.56 Packing: 1 set New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 set Door Handles Lever Handles - CASSINA Lever handle sets 1 Material/finish Version Entrance Dummy Material/finish Version Entrance Dummy Brass antique coloured DIN right hand 901.98.913 901.98.915 Brass polished PVD DIN right hand 911.64.631 911.64.417 DIN left hand 901.98.912 901.98.914 DIN left hand 911.64.633 911.64.416 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 set Packing: 1 set Order reference Mortise lock and round cylinder ............................... page 1.58 New products and systems: www.hafele.com AH 1.57 Door Handles Lever Handles - CASSINA Mortise lock and round cylinder 1 Technical data • Backset: 70 mm • For door thickness: 35– 50 mm Supplied with 1 Set mortise locks 1 Set round cylinders 1 Striking plate Material/finish Cat. No. Brass polished PVD 911.02.185 Brass antique coloured 911.02.269 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 set AH 1.58 New products and systems: www.hafele.com We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Door Handles Lever Handles - CASSINA 1 New products and systems: www.hafele.com AH 1.59 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Door Handles Lever Handles - FSB 1 AH 1.60 New products and systems: www.hafele.com Door Handles Lever Handles - FSB Pull handle set Lever handle sets 1 Material/finish Cat. No. Brass bronze coloured 900.92.131 Material/finish Cat. No. Brass bronze coloured 901.00.194 Packing: 1 set We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Packing: 1 set Material/finish Cat. No. Brass bronze coloured 900.92.137 Packing: 1 set New products and systems: www.hafele.com AH 1.61